2 Way 0º Power Divider 40-1000MHz MACPES0045 V2 Features • • • • Schematic Surface Mount 2 Way 0 degree Available on tape & reel Excellent isolation Description M/A-COM’s MACPES0045 is 2 way 0 degree power divider in a low cost, surface mount package. Ideally suited for high volume CATV & VSAT applications. Two 0603 1pf capacitors and one 160 Ohm resistor are required with this part. Case Style: SM-150 Pin Configuration Pin No. Function 1 Output 1 3 Ground 4 Input 2&5 2 x External shunt 1pf Cap, short pin 2 & 5 together. 6 Output 2 Ordering Information Part Number Package MACPES0045 2000 piece reel Dimensions in inches [mm] Tolerance: .xx ± .02, .xxx ± .010 Note: Reference Application Note M513 for reel size information. 1 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. 2 Way 0º Power Divider 40-1000MHz MACPES0045 V2 Electrical Specifications: TA = 25°C, Z0 = 75Ω Parameter Test Conditions Units Min Typ Max Insertion Loss (Above 3dB) 40 - 700 MHz 700 - 850 MHz 850 - 870 MHz 870 - 1000 MHz dB dB dB dB - 0.3 0.5 0.9 1.0 0.8 1.0 1.2 1.4 Isolation 40 - 1000 MHz dB 18 25 - Amplitude Unbalance 40 - 1000 MHz dB - 0.2 0.5 Phase Unbalance 40 - 1000 MHz º - 0.50 50 Input Return Loss 40 - 700 MHz 700 - 1000 MHz dB dB - 25 18 15 12 Output Return Loss 1 40 - 440 MHz 440 - 700 MHz 700 - 1000 MHz dB dB dB - 20 16 13 15 12 10 Output Return Loss 2 40 - 440 MHz 440 - 700 MHz 700 - 1000 MHz dB dB dB - 16 18 14 13 15 11 Note: Specification subject to change without notice Absolute Maximum Ratings 1,2 Parameter Absolute Maximum RF Power 1 Watt Internal Load Dissipation 0.125 Watt Storage Temperature -40°C to +85°C Operating Temperature -40°C to +80°C Recommended PCB Configuration 1. Exceeding any one or combination of these limits may cause permanent damage to this device. 2. M/A-COM does not recommend sustained operation near these survivability limits. 2 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. 2 Way 0º Power Divider 40-1000MHz MACPES0045 V2 Typical Performance Curves @ TA = 25°C, Z0 = 75Ω Insertion Loss Port 1 Amplitude Unbalance Insertion Loss Port 2 Phase Unbalance 3 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. 2 Way 0º Power Divider 40-1000MHz MACPES0045 V2 Typical Performance Curves @ TA = 25°C, Z0 = 75Ω Isolation Output Return Loss 1 Input Return Loss Output Return Loss 2 4 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information.