Advance Product Information December 3, 2002 Wideband Fixed Attenuators TGL4201-EPU Key Features and Performance 0 dB Attenuator • • • • • • • • 2 dB Attenuator Fixed 0, 2, 3, 6 and 10dB Attenators Broadband Response DC to > 40 GHz Excellent Return Loss > 15 dB Power Handling > 28 dBm On-Chip Grounding Vias 3MI Passive Part Low Price Small size: 0.5 x 0.5 x 0.1 mm (0.02 X 0.02 X 0.004 in) Primary Applications 3 dB Attenuator 6 dB Attenuator • Point to Point Radio • Fiber Optic • Wideband Military & Space • Test Equipment Typical Electrical Characteristics 10 dB Attenuator A tte n u a tio n (d B ) Attenuators Probed in Fixtures 0 -1 -2 -3 -4 -5 -6 -7 -8 -9 -10 -11 2dB 3dB 6dB 10dB -12 -13 2dB 0 10 3dB 20 6dB 10dB 30 40 50 Frequency (GHz) Note: Devices designated as EPU are typically early in their characterization process prior to finalizing all electrical and process specifications. Specifications are subject to change without notice TriQuint Semiconductor Texas : Phone (972)994 8465 Fax (972)994 8504 Web: www.triquint.com 1 Advance Product Information December 3, 2002 TGL4201-EPU TABLE I ELECTRICAL CHARACTERISTICS (Ta = 25 0C Nominal) PARAMETER Attenuation TEST CONDITIONS TYP UNIT DC ~ 40 GHz 0dB for 0dB Attenuator 2dB for 2dB Attenuator 3dB for 3dB Attenuator 6dB for 6dB Attenuator 10dB for 10dB Attenuator dB IRL Input Return Loss DC ~ 40 GHz 15 dB ORL Output Return Loss DC ~ 40 GHz 15 dB 2 - 18 GHz > 28 dBm Maximum Power* * This value is a result of burnout tests conducted on fixtured parts. Tests were performed with a fixed 50W input and output impedance, continuous wave input power. Failure criteria was a change of 0.5 dB attenuation. Note: Devices designated as EPU are typically early in their characterization process prior to finalizing all electrical and process specifications. Specifications are subject to change without notice TriQuint Semiconductor Texas : Phone (972)994 8465 Fax (972)994 8504 Web: www.triquint.com 2 Advance Product Information December 3, 2002 TGL4201-EPU Typical Measurement Attenuators Attenuators Probed in Fixtures 0 -5 -10 -15 -20 -25 -30 -35 -40 -45 IRL 0 10 20 3 dB Attenuator R e tu rn L o s s (d B ) R e tu rn L o s s (d B ) 2 dB Attenuator ORL 30 40 0 -5 -10 -15 -20 -25 -30 -35 -40 -45 50 IRL 0 10 Frequency (GHz) 0 10 20 0 -5 -10 -15 -20 -25 -30 -35 -40 -45 50 40 50 R e tu rn L o s s (d B ) ORL 30 40 10 dB Attenuator R e tu rn L o s s (d B ) IRL 30 Frequency (GHz) 6 dB Attenuator 0 -5 -10 -15 -20 -25 -30 -35 -40 -45 20 ORL 40 50 Frequency (GHz) IRL 0 10 20 ORL 30 Frequency (GHz) Note: Devices designated as EPU are typically early in their characterization process prior to finalizing all electrical and process specifications. Specifications are subject to change without notice TriQuint Semiconductor Texas : Phone (972)994 8465 Fax (972)994 8504 Web: www.triquint.com 3 Advance Product Information December 3, 2002 TGL4201-EPU Typical Measurement Attenuators No Bond Wire, Probed from 45 MHz to 110GHz 0 2dB -2 3dB Attenuaton (dB) -4 6dB -6 -8 -10 2dB -12 10dB 3dB -14 6dB -16 10dB -18 0 20 40 60 80 100 Frequency (GHz) Input Return Loss (dB) 0 2dB -10 3dB 6dB -20 10dB 2dB 10dB -30 3dB -40 6dB -50 -60 0 20 40 60 80 100 Frequency (GHz) Output R eturn Loss (dB ) 0 2dB 3dB 6dB 10dB -10 -20 3dB 10dB -30 2dB -40 6dB -50 -60 0 20 40 60 80 100 Frequency (GHz) Note: Devices designated as EPU are typically early in their characterization process prior to finalizing all electrical and process specifications. Specifications are subject to change without notice TriQuint Semiconductor Texas : Phone (972)994 8465 Fax (972)994 8504 Web: www.triquint.com 4 Advance Product Information December 3, 2002 TGL4201-EPU Mechanical Drawing GaAs MMIC devices are susceptible to damage from Electrostatic Discharge. Proper precautions should be observed during handling, assembly and test. Note: Devices designated as EPU are typically early in their characterization process prior to finalizing all electrical and process specifications. Specifications are subject to change without notice TriQuint Semiconductor Texas : Phone (972)994 8465 Fax (972)994 8504 Web: www.triquint.com 5 Advance Product Information December 3, 2002 TGL4201-EPU Chip Assembly Diagram GaAs MMIC devices are susceptible to damage from Electrostatic Discharge. Proper precautions should be observed during handling, assembly and test. Note: Devices designated as EPU are typically early in their characterization process prior to finalizing all electrical and process specifications. Specifications are subject to change without notice TriQuint Semiconductor Texas : Phone (972)994 8465 Fax (972)994 8504 Web: www.triquint.com 6 Advance Product Information December 3, 2002 TGL4201-EPU Assembly Process Notes Reflow process assembly notes: · · · · · Use AuSn (80/20) solder with limited exposure to temperatures at or above 300§C (30 seconds max). An alloy station or conveyor furnace with reducing atmosphere should be used. No fluxes should be utilized. Coefficient of thermal expansion matching is critical for long-term reliability. Devices must be stored in a dry nitrogen atmosphere. Component placement and adhesive attachment assembly notes: · · · · · · Vacuum pencils and/or vacuum collets are the preferred method of pick up. The force impact is critical during auto placement. Organic attachment can be used in low-power applications. Curing should be done in a convection oven; proper exhaust is a safety concern. Microwave or radiant curing should not be used because of differential heating. Coefficient of thermal expansion matching is critical. Interconnect process assembly notes: · · · · Thermosonic ball bonding is the preferred interconnect technique. Force, time, and ultrasonics are critical parameters. Aluminum wire should not be used. Maximum stage temperature is 200§C. GaAs MMIC devices are susceptible to damage from Electrostatic Discharge. Proper precautions should be observed during handling, assembly and test. Ordering Information PART NUMBER ATTENUATOR TGL4201-00-EPU 0 dB Attenuator TGL4201-02-EPU 2 dB Attenuator TGL4201-03-EPU 3 dB Attenuator TGL4201-06-EPU 6 dB Attenuator TGL4201-10-EPU 10 dB Attenuator Note: Devices designated as EPU are typically early in their characterization process prior to finalizing all electrical and process specifications. Specifications are subject to change without notice TriQuint Semiconductor Texas : Phone (972)994 8465 Fax (972)994 8504 Web: www.triquint.com 7