SPD5415 thru SPD5420 and SPD5415SMS thru SPD5420SMS Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com 3 AMPS 50 ─ 600 VOLTS 150 – 400 nsec FAST RECOVERY RECTIFIER Designer’s Data Sheet Part Number/Ordering Information 1/ SPD __ __ __ │ │ └ Screening 2/ │ │ __ = Not Screened │ │ TX = TX Level │ │ TXV = TXV │ │ S = S Level │ │ │ └ Package Type __ = Axial Leaded │ SMS = Surface Mount Square Tab │ │ └ Voltage/Family 5415 = 50V 5416 = 100V 5417 = 200V 5418 = 400V 5419 = 500V 5420 = 600V • • • • • • • • • • FEATURES: Fast Reverse Recovery (Faster Versions Available) PIV to 600 Volts (Higher Voltages Available) Hermetically Sealed Controlled Avalanche Low Thermal Resistance High Surge Capability Available in Axial & Square Tab Versions Metallurgically Bonded TX, TXV, and S-Level Screening Available 2/ Replacement for: 1N 5415, US thru 1N5420, US MAXIMUM RATINGS 3/ RATING Peak Repetitive Reverse Voltage And DC Blocking Voltage Average Rectified Forward Current 4/ SYMBOL VALUE UNIT SPD5415 SPD5416 SPD5417 SPD5418 SPD5419 SPD5420 VRRM VRWM VR 50 100 200 400 500 600 Volts TA = 55°C TA = 100°C IO 3 2 Amps IFSM 80 Amps -65 to +175 °C 20 10 °C/W Peak Surge Current (10 surges of 8.3 msec each at 1 minute intervals superimposed on IO = 0, VRSM = 0, TA = 100°C) Operating & Storage Temperature Thermal Resistance Junction to Lead for Axial, L =.375" Junction to End Tab for Surface Mount TJ and TSTG RθJL RθJEC NOTES: 1/ For Ordering Information, Price, Operating Curves, and Availability- Contact Factory. 2/ Screened to MIL-PRF-19500. 3/ Unless Otherwise Specified, All Electrical Characteristics @25ºC. 4/ These ratings are typical for PC boards where thermal resistance from mounting point to ambient is sufficiently controlled where TJ(MAX) is not exceeded. For 3.0 Amps at TA = 55°C, derate linearly at 22 mA for 55°C ≤ TA ≤ 100°C. For 2.0 Amps at TA = 100°C, derate linearly at 25 mA for 100°C ≤ TA ≤ 175°C. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. Axial Leaded DATA SHEET #: RC0106A SMS DOC SPD5415 thru SPD5420 and SPD5415SMS thru SPD5420SMS Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com ELECTRICAL CHARACTERISTICS 3/ CHARACTERISTICS SYMBOL IF = 1.5 Adc IF = 9 Adc, 300 µs Pulse IF = 0.5 Adc, TA = -55°C Forward Voltage SPD5415 SPD5416 SPD5417 SPD5418 SPD5419 SPD5420 Breakdown Voltage (IR = 50 µAdc) Maximum Reverse Leakage Current (Rated VR, TA = 25°C) (SPD5415 thru 5417- Rated VR, TA = 100°C) (SPD5418 thru 5420- Rated VR, TA = 100°C) Junction Capacitance (VR = 4 Vdc, 100KHz ≤ f ≤ 1MHz) SPD5415 thru SPD5418 SPD5419 SPD5420 Maximum Reverse Recovery Time (IF = 500mA, IR = 1A, IRR = 250mA) VF1 VF2 VF3 V(BR) VALUE MIN MAX 0.5 1.2 0.6 0.5 1.5 1.4 55 110 220 440 550 660 UNIT Vdc Vdc IR1 IR2 IR3 1.0 20 30 µA CJ 120 pF trr 150 250 400 ns NOTES: 1/ For Ordering Information, Price, Operating Curves, and Availability- Contact Factory. 2/ Screened to MIL-PRF-19500. 3/ Unless Otherwise Specified, All Electrical Characteristics @25ºC. 4/ These ratings are typical for PC boards where thermal resistance from mounting point to ambient is sufficiently controlled where TJ(MAX) is not exceeded. For 3.0 Amps at TA = 55°C, derate linearly at 22 mA for 55°C ≤ TA ≤ 100°C. For 2.0 Amps at TA = 100°C, derate linearly at 25 mA for 100°C ≤ TA ≤ 175°C. Package Outlines: DIMENSIONS (inches) DIM. A B C D Minimum .140 .190 .037 .90 DIMENSIONS (inches) Maximum .180 .260 .042 1.30 AXIAL NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DIM. A B C D Minimum .170 .240 .023 .002 Maximum .180 .300 .028 --- SMS DATA SHEET #: RC0106A DOC