C M D4504 5-CH Motor Drive IC Features Descriptions l 2-CH l 2-CH l 1-CH The CMD4504 is a 5CH motor driver for CD-p/VCD/DVD systems. It is composed of 2-CH BTL driver, 2-CH driver with current feedback and 1-CH forward/reverse control DC motor driver. BTL driver BTL driver with current feedback forward/reverse control DC motor driver l Built-in motor speed control circuit l Built-in TSD (thermal shut down) circuit l Built-in mute circuit l Operating supply voltage (4.5V~13.2V) Internal Block Diagram VOFC- VOFC+ VOTK- VOTK+ VCC2 28 27 26 25 24 MUTE 23 BIAS 22 VINSP VINSL VCC1 21 20 19 VCC1 VCC2 PGND Stand by Actuator Driver Sled Driver Thermal Shut Down Actuator Driver VOSL+ VOSL- VOSP+ VOSP18 17 16 15 Spindle Driver 20K 20K 10K 10K 7.5K 7.5K 7.5K 7.5K Det Amp 20K Det Amp 20K Pre-DRV TRAY DRIVER PGND GND 10K 10K 1 2 3 4 5 6 7 VINFC CFCerr1 CFCerr2 VNFFC VNFTK CTKerr1 CTKerr2 8 GND 9 10 VINTK VCTL 11 FWD 12 REV 13 14 VOTR+ VOTR- * All specs and applications shown above subject to change without prior notice. 1F-5 NO.66 SEC.2 NAN-KAN RD ., LUCHU , TAOYUAN, TAIWAN Tel:886-3-3214525 Fax:886-3-3521052 Page 1 of 6 Email: [email protected] Http: www.ceramate.com.tw Rev 1.0 May 22, 2003 C M D4504 5-CH Motor Drive IC Pin Assignments VOFC- VOFC+ VOTK- VOTK+ VCC2 28 27 26 25 24 MUTE BIAS 23 22 VINSP VINSL VCC1 21 20 19 VOSL+ VOSL- VOSP+ VOSP17 16 15 18 CMD4504 1 2 3 4 5 6 7 VINFC CFCerr1 CFCerr2 VNFFC VNFTK CTKerr1 CTKerr2 8 9 10 11 12 GND VINTK VCTL FWD REV 13 14 VOTR+ VOTR- Pin Definitions NO SYMBOL 1 VINFC 2 CRCerr1 3 CRCerr2 4 VNFFC FUNCTION NO Input for focus driver 15 Connection of capacitor for the 16 error amp filter Connection of capacitor for the 17 error amp filter Focus driver feedback pin 18 5 VNFTK Input for tracking driver 6 CTKerr1 7 CTKerr2 8 9 GND VINTK 10 VCTL 11 12 13 14 FWD REV VOTR+ VOTR- 19 Connection of capacitor for the 20 error amp filter Connection of capacitor for the 21 error amp filter Ground 22 Feedback for tracking driver 23 Speed control input of tray 24 driver Tray driver forward input 25 Tray driver reverse input 26 Tray driver output (+) 27 Tray driver output (-) 28 SYMBOL FUNCTION VOSPSpindle driver output (-) VCC1 VOSP+ Spindle driver output (+) VOSL- Sled driver output (-) VOSL+ Sled driver output (+) Vcc for pre-driver block and power block of sled and tray VINSL OPAMP input for the sled driver VINSP Input for spindle driver BIAS MUTE Input for reference voltage Input for mute control Vcc for power block of spindle, tracking and focus Tracking driver output (+) Tracking driver output (-) Focus driver output (+) Focus driver output (-) VCC2 VOTK+ VOTKVOFC+ VOFC- * All specs and applications shown above subject to change without prior notice. 1F-5 NO.66 SEC.2 NAN-KAN RD ., LUCHU , TAOYUAN, TAIWAN Tel:886-3-3214525 Fax:886-3-3521052 Page 2 of 6 Email: [email protected] Http: www.ceramate.com.tw Rev 1.0 May 22, 2003 C M D4504 5-CH Motor Drive IC Absolute Maximum Ratings (Ta=25℃) CHARACTERISTICS SYMBOL VALUE UNIT VCC max 18 V Pd 2.5* W Operating temperature Topr -35~+85 ℃ Storage temperature Tstg -55~+150 ℃ Maximum supply voltage Power dissipation Note: 1. When mounted on 50mm * 50mm * 1mm PCB (Phenolic resin material). 2. Power dissipation reduces 20mW/℃ for using above Ta=25℃ 3. Do not exceed Pd and SOA Power Dissipation (mW) Power Dissipation Curve 3 2 1 0 25 50 75 100 125 175 150 Ambient Temperature ( ) Recommended Operating Conditions CHARACTERISTICS SYMBOL VALUE UNIT Supply voltage VCC1 4.5~13.2 V Supply voltage VCC2 4.5~13.2 V * All specs and applications shown above subject to change without prior notice. 1F-5 NO.66 SEC.2 NAN-KAN RD ., LUCHU , TAOYUAN, TAIWAN Tel:886-3-3214525 Fax:886-3-3521052 Page 3 of 6 Email: [email protected] Http: www.ceramate.com.tw Rev 1.0 May 22, 2003 C M D4504 5-CH Motor Drive IC Electrical Characteristics (VCC1=8V, VCC2=5V, f=1kHz, RL =8Ω, Rs =0.5Ω, Ta=25℃ unless otherwise specified.) CHARACTERISTICS SYMBOL Quiescent circuit current Icc CONDITIONS MIN TYP MAX UNIT No load - 15 - mA All mute in current Iamute Pin23=GND - - 4 mA All mute on voltage Vamon Pin23=variation - - 0.5 V All mute off voltage Vamoff Pin23=variation 2.0 - - V Reference mute on voltage Vrmon Pin23=variation - - 0.5 V Reference mute off voltage Vrmoff Pin23=variation 2.0 - - V Pin1=Pin9=Pin22=Vref - 0 - mA [ ACTUATOR PART (CH4,CH5)] Output offset current Ioo Maximum output voltage 45 Vom45 Vcc2=5V, RL= 8Ω - 3.8 - V Transmission gain 45 Gm45 Vin=0.1Vrms, f=1kHz - 1.5 - A/V -100 - +100 mV - 6.0 - V [ SPINDLE,SLED PART (CH2,CH3)] Output offset voltage 23 Voo23 Vin=Vref Maximum output voltage 23 Vom23 Vcc1=8V,RL=12Ω Closed-loop voltage gain 23 Avf23 Vin=0.1Vrms, f=1kHz 16 18 20 dB Slew rate 23 SR23 Vout=4.0 Vpp, Square - 1.5 - V/uS Ripple rejection ratio 23 RR23 Vin=0.1Vrms, f=120Hz 50 60 - dB Input high level voltage Vih - 2.0 - - V Input low level voltage Vil - - - 0.5 V Output voltage Vo Vcc=8V, RL=45Ω Pin10=open - 6 - V CTL to output transfer gain Gv Vcc=8V, RL=45Ω Pin10=3~4V - 1 - V/V Output offset voltage 1 Voo1 Pin11=Pin12=5V -50 +50 mV Output offset voltage 2 Voo2 Pin11=Pin12=0V -50 +50 mV [ TRAY DRIVE PART (CH1)] * All specs and applications shown above subject to change without prior notice. 1F-5 NO.66 SEC.2 NAN-KAN RD ., LUCHU , TAOYUAN, TAIWAN Tel:886-3-3214525 Fax:886-3-3521052 Page 4 of 6 Email: [email protected] Http: www.ceramate.com.tw Rev 1.0 May 22, 2003 C M D4504 5-CH Motor Drive IC Application Circuit Focus Actuator Focus Actuator Sled Motor R1 28 Spindle Motor R2 27 26 25 24 23 21 22 20 VCC2 18 16 15 PGND Thermal Shut down Actuator Driver 17 VCC1 Stand by Actuator Driver 19 Sled Driver 20K Spindle Driver 20K 10K 7.5K Det Amp 20K Det Amp 20K 7.5K Pre-DRV 3 2 R3 C1 4 5 6 TRAY DRIVER PGND GND 10K 10K 1 10K 7.5K 7.5K 7 8 9 10 11 12 13 14 R4 C2 Motor Loading VCTL FWD REV Focus Tracking Sled VREF Spindle Stand-by * All specs and applications shown above subject to change without prior notice. 1F-5 NO.66 SEC.2 NAN-KAN RD ., LUCHU , TAOYUAN, TAIWAN Tel:886-3-3214525 Fax:886-3-3521052 Page 5 of 6 Email: [email protected] Http: www.ceramate.com.tw Rev 1.0 May 22, 2003 C M D4504 5-CH Motor Drive IC Mechanical Dimensions Package * All specs and applications shown above subject to change without prior notice. 1F-5 NO.66 SEC.2 NAN-KAN RD ., LUCHU , TAOYUAN, TAIWAN Tel:886-3-3214525 Fax:886-3-3521052 Page 6 of 6 Email: [email protected] Http: www.ceramate.com.tw Rev 1.0 May 22, 2003