RoHS Compliant GaAs SP4T High Power Switch DC - 3 GHz Features • • • • • • • • • MASW-007813 V2 Functional Schematic Low Voltage Operation: 2.5 V Low Harmonics: < -66 dBc at +34 dBm & 1 GHz Low Insertion Loss: 0.7 dB at 1 GHz High Isolation: 25 dB at 2 GHz 0.5 micron GaAs PHEMT Process Low Profile, Lead-Free 3 mm PQFN Package 100% Matte Tin Plating Halogen-Free “Green” Mold Compound RoHS* Compliant and 260°C Re-flow Compatible A N T Pin 16 Pin 1 100 pF RF1 RF4 100 pF 100 pF Description M/A-COM’s MASW-007813 is a GaAs PHEMT MMIC single pole four throw (SP4T) high power switch in a low cost, low profile, lead-free 3 mm PQFN 16-lead package. The MASW-007813 is ideally suited for applications where high power, low control voltage, low insertion loss, high isolation, small size and low cost are required. Typical applications are for GSM and DCS handset systems that connect separate transmit and receive functions to a common antenna, as well as CDMA handset and other related applications. The MASW-007813 can be used in all systems operating up to 3 GHz requiring high power at low control voltage. RF2 100 pF MASW-007813-TR3000 3000 piece reel V1 V4 V3 Pin Configuration Pin No. Pin Name Description 1 RF1 RF Port 1 2 GND RF Ground 3 GND RF Ground 4 RF2 RF Port 2 5 V2 Control 2 6 V1 Control 1 7 V4 Control 4 8 V3 Control 3 9 RF3 RF Port 3 10 GND RF Ground 11 GND RF Ground 12 RF4 RF Port 4 13 GND RF Ground 14 ANT Antenna Port 15 GND RF Ground 16 GND RF Ground 17 GND (paddle) 2 RF Ground Ordering Information 1 Package 100 pF V2 The MASW-007813 is fabricated using a 0.5 micron gate length GaAs PHEMT process. The process features full passivation for performance and reliability. Part Number RF3 1. Reference Application Note M513 for reel size information. 2. The exposed pad centered on the package bottom must be connected to RF and DC ground. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. RoHS Compliant GaAs SP4T High Power Switch DC - 3 GHz MASW-007813 V2 Electrical Specifications: TA = 25°C, VC = 0 V / 2.75 V, PIN = 34 dBm, Z0 = 50 Ohms 3 Parameter Test Conditions Units Min. Typ. Max. Insertion Loss 4 DC - 1 GHz 1 - 2 GHz 2 - 3 GHz dB dB dB — — — 0.7 0.8 1.0 0.85 — — Isolation DC - 1 GHz 1 - 2 GHz 2 - 3 GHz dB dB dB 25 — — 33 27 23 — — — Return Loss DC - 3 GHz dB — 20 — P0.1dB 1 GHz dBm — 38 — IP2 Two Tone, +26 dBm/Tone, 5 MHz spacing, > 50 MHz dBm — 96 — IP3 Two Tone, +26 dBm/Tone, 5 MHz spacing, > 50 MHz dBm — 58 — 2nd Harmonic 1 GHz, Pin = +34 dBm dBc — -76 -68 3rd Harmonic 1 GHz, Pin = +34 dBm dBc — -68 -66 Trise, Tfall 10% to 90% RF, 90% to 10% RF nS — 40 — Ton, Toff 50% Control to 90% RF, 50% Control to 10% RF nS — 110 — mV — 40 — µA — 20 80 Transients Control Current VC = 2.75 V 3. For positive voltage control, external DC blocking capacitors are required on all RF ports. 4. Insertion loss can be optimized by varying the DC blocking capacitor value, e.g. 1000 pF for 100 MHz - 1 GHz, 39 pF for 0.5 GHz - 3 GHz. Absolute Maximum Ratings 7 Truth Table 5,6 V1 V2 V3 V4 ANT RF1 ANT - ANT RF2 RF3 1 0 0 0 On Off Off 0 1 0 0 Off On 0 0 1 0 Off 0 0 0 1 Off ANT RF4 Parameter Absolute Maximum Off Max Input Power (0.5 - 3 GHz, 2.75 V Control) +38 dBm Off Off Operating Voltage +8.5 volts Off On Off Operating Temperature -40°C to +85°C Off Off On Storage Temperature -65°C to +150°C 5. Differential voltage, V (state 1) - V (state 0), must be +2.5 V minimum and must not exceed 8.5 V. 6. 0 = -8.5 V to 0 V, 1 = -6 V to 8.5 V 7. Exceeding any one or combination of these limits may cause permanent damage to this device. 2 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. RoHS Compliant GaAs SP4T High Power Switch DC - 3 GHz MASW-007813 V2 Typical Performance Curves Insertion Loss Isolation 1.2 40 1.0 35 0.8 30 +25°C +85°C -40°C 0.6 0.4 0.5 1.0 1.5 2.0 2.5 +25°C +85°C -40°C 25 3.0 20 0.5 1.0 1.5 2.0 2.5 3.0 Frequency (GHz) Frequency (GHz) Return Loss Harmonics vs. Control Voltage, 1 GHz -60 0 2nd Harmonic 3rd Harmonic +25°C +85°C -40°C 10 -65 20 -70 30 -75 40 0.5 -80 1.0 1.5 2.0 2.5 3.0 Frequency (GHz) 2.0 2.5 3.0 3.5 4.0 4.5 5.0 Control Voltage (V) 3 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. RoHS Compliant GaAs SP4T High Power Switch DC - 3 GHz MASW-007813 V2 Low Profile, Lead-Free 3 mm 16-lead PQFN † † Reference Application Note M538 for lead-free solder reflow recommendations. Meets JEDEC moisture sensitivity level 1 requirements. Qualification Qualified to M/A-COM specification REL-201, Process Flow –2. Handling Procedures The following precautions should be observed to avoid damage: Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 4 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information.