SENSITRON SHD126044N

SHD126044
SHD126044P
SHD126044N
SHD126044D
SENSITRON
SEMICONDUCTOR
TECHNICAL DATA
DATA SHEET 371, REV. A
Applications:
SCHOTTKY RECTIFIER
Very Low Forward Voltage Drop
200•C Operating Temperature
œ Switching Power Supply œ Converters œ Free-Wheeling Diodes œ Polarity Protection Diode
Features:
œ
œ
œ
œ
œ
œ
œ
œ
Low Reverse Leakage Current
Soft Reverse Recovery at Low and High Temperature
Very Low Forward Voltage Drop
Low Power Loss, High Efficiency
High Surge Capacity
Guard Ring for Enhanced Durability and Long Term Reliability
Guaranteed Reverse Avalanche Characteristics
Out Performs 100 Volt Ultrafast Rectifiers
Maximum Ratings:
Characteristics
Peak Inverse Voltage
Max. Average Forward
Current
Symbol
VRWM
IF(AV)
Condition
50% duty cycle, rectangular
wave form
-Common Cathode (P) / Anode (N)
-Doubler (D)
Max. Peak One Cycle NonRepetitive Surge Current
Non-Repetitive Avalanche
Energy
Repetitive Avalanche Current
IFSM
8.3 ms, half Sine wave
EAS
Maximum Thermal Resistance
(Junction to Mounting Surface)
R
TJ = 25 •C, IAS = 0.23 A,
L = 130 mH
IAS decay linearly to 0 in 1 ms
‹ limited by TJ max VA=1.5VR
-
(per leg)
Max. Junction Temperature
Max. Storage Temperature
IAR
JC
TJ
Tstg
-
Max.
100
Units
V
A
6.0
3.0
55
A
3.5
mJ
0.23
A
9.2
•C/W
-65 to +200
-65 to +175
•C
•C
Max.
0.94
0.78
0.07
Units
V
V
mA
1.6
mA
100
pF
Electrical Characteristics:
Characteristics
Max. Forward Voltage Drop
(per leg)
Max. Reverse Current
(per leg)
Symbol
VF1
VF2
IR1
IR2
Max. Junction Capacitance
(per leg)
CT
Condition
@ 3A, Pulse, TJ = 25 •C
@ 3A, Pulse, TJ = 125 •C
@VR = 100V, Pulse,
TJ = 25 •C
@VR = 100V, Pulse,
TJ = 125 •C
@VR = 5V, TC = 25 •C
fSIG = 1MHz,
VSIG = 50mV (p-p)
221 WEST INDUSTRY COURT DEER PARK, NY 11729-4681 PHONE (516) 586-7600 FAX (516) 242-9798
World Wide Web - http://www.sensitron.com E-mail Address - [email protected]
SHD126044
SHD126044P
SHD126044N
SHD126044D
TECHNICAL DATA
DATA SHEET 371, REV. Mechanical Dimensions: In Inches / mm
.150 (3.81
Dia.
.140 3.56)
.665 (16.89
.645 16.38)
1.132 (28.75
1.032 26.21)
1
2
COMMON CATHODE
.200 (5.08
.190 4.82)
.420 (10.67
.410 10.41)
.537 (13.64
.527 13.39)
SINGLE
.045 (1.14
.035 0.89)
1
2
3
1
COMMON ANODE
.430 (10.92
.410 10.41)
2
3
DOUBLER
3
1
.035 (0.89
.025 0.63)
3 Places
.100(2.54) BSC
2 Places
.120(3.05) BSC
PINOUT TABLE
TYPE
SINGLE RECTIFIER
DUAL RECTIFIER, COMMON CATHODE (P)
DUAL RECTIFIER, COMMON ANODE (N)
DUAL RECTIFIER, DOUBLER (D)
2
3
3
2
1
TO-257
PIN 1
CATHODE
ANODE 1
CATHODE 1
ANODE
PIN 2
ANODE
COMMON CATHODE
COMMON ANODE
ANODE/CATHODE
Typical Forward Characteristics
PIN 3
ANODE
ANODE 2
CATHODE 2
CATHODE
Typical Reverse Characteristics
1
Instantaneous Reverse Current - I R (mA)
10
200 °C
0
175 °C
125 °C
10-1
175 °C
150 °C
10-1
125 °C
10-2
100 °C
75 °C
10-3
50 °C
10-4
25 °C
-5
10
0
10-2
10-3
0.1
0.2
0.3
0.4
0.5
0.6
0.7
Forward Voltage Drop - V F (V)
20
40
60
80
100
Reverse Voltage - VR (V)
120
Typical Junction Capacitance
25 °C
Junction Capacitance - C T (pF)
Instantaneous Forward Current - I F (A)
10
200°C
100
0.8
90
80
70
60
50
40
30
20
10
0
20
40
60
80
Reverse Voltage - VR (V)
100
120
Note: The Vf curves shown are for the SD060SC100 unpackaged die only.
221 WEST INDUSTRY COURT DEER PARK, NY 11729-4681 PHONE (516) 586-7600 FAX (516) 242-9798
World Wide Web - http://www.sensitron.com E-mail Address - [email protected]
SENSITRON
SEMICONDUCTOR
TECHNICAL DATA
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version
of the datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment,
medical equipment, and safety equipment), safety should be ensured by using semiconductor devices that feature assured safety or by
means of users’ fail-safe precautions or other arrangement.
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during
operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual
property claims or any other problems that may result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from
use at a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of
Sensitron Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will
hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third
party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and
regulations.
• 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 •
• World Wide Web - http://www.sensitron.com • E-Mail Address - [email protected]