LCD-128G064E Vishay 128 x 64 Dots Graphic LCD FEATURES • 128 x 64 dots + 4 Icons • Built-in controller (KS0108) • + 5V power supply • 1/64 duty cycle • EL backlight (built-in EL inverter) • Built-in N.V MECHANICAL DATA ITEM ABSOLUTE MAXIMUM RATING STANDARD VALUE UNIT 54.0 x 50.0 x 7.5 mm Viewing Area 43.5 x 29.0 mm Dot Size 0.28 x 0.35 mm Dot Pitch 0.32 x 0.39 mm Module Dimension ITEM SYMBOL STANDARD VALUE UNIT MIN. TYP. MAX. Power Supply VDD-VSS 2.8 5 5.5 V Input Voltage VI - 0.3 – VDD V NOTE: VSS = 0 Volt, VDD = 5.0 Volt ELECTRICAL SPECIFICATIONS ITEM Input Voltage Supply Current SYMBOL Document Number: 37237 Revision 01-Oct-02 UNIT MIN. TYP. MAX. L level 0.7VDD – VDD V VIO H level 0 – 0.3VDD V IDD VDD = 5V – 49.5 – mA - 20°C 9.3 9.5 9.8 25°C 8.3 8.5 8.8 60°C 7.2 7.3 7.8 Vel = 110VAC; 400Hz – – 5.0 VDD-V0 Version Module EL Power Supply Current STANDARD VALUE VDD Recommended LC Driving Voltage for Normal Temp. CONDITION IEL For Technical Questions, Contact: [email protected] V mA www.vishay.com 89 LCD-128G064E Vishay 128 x 64 Dots Graphic LCD PIN NUMBER 1 2 3 4 SYMBOL Vss Vdd Vo D/I 5 R/W 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 E DB0 DB1 DB2 DB3 DB4 DB5 DB6 DB7 CS1 CS2 RST Vee BL + BL - FUNCTION Power Supply (0V) Power Supply Operating Voltage for LCD Driving Register Selection Input High = Data Register Low = Instruction Register (for Write) Busy Flag Address Counter (for Read) R/W Signal Input is used to Select the Read/Write Mode High = Read Mode, Low = Write Mode Start Enable Signal to Read or Write the Data Data Bus Line Data Bus Line Data Bus Line Data Bus Line Data Bus Line Data Bus Line Data Bus Line Data Bus Line Chip Enable for D2 (Segment 1 to Segment 64) Chip Enable for D3 (Segment 65 to Segment 128) Reset Signal Power Supply for LCD Enable (on/off) for EL B/L No Connection DIMENSIONS in millimeters 54.0 ± 0.5 43.5 40.92 7.5 MAX 1.5 2.5 4.75 5.25 6.54 3.3 0.28 47.0 45.0 128*64 DOTS 0.39 0.35 2.0 29.0 26.92 A 40.5 B 8.0 DOT SIZE 0.1 90° EL or NO B/L 90° 1 0. 1 0. ° 1.8 0.7 60 2.7 1.8 3.0 1.8 4.0 0.1 1.2 0.3 1.0 4 - Ø 2.5 4 - Ø 5.0 4 - Ø 0.8 4 - Ø 1.3 P2.0*19 = 38.0 49.0 2.5 2.0 50.0 ± 0.5 10.5 11.54 0.32 1.9 4.0 4.0 DETAIL B DETAIL A www.vishay.com 90 For Technical Questions, Contact: [email protected] Document Number: 37237 Revision 01-Oct-02 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1