COTCO LUMINANT DEVICE (HUIZHOU) LTD. SPECIFICATION FOR COTCO LED LAMP Document No: Model No : Rev. No : Date: SPE/LM1-PPP1-01-N1-MT LM1-PPP1-01-N1-MT 01 2006-06-27 Description: 120 Degree 3.2 x 2.8mm SMT-LED in Full Color with Water Transparent *This specification is only for MT Dice Material: AlGaInP&InGaN Confirmed By Customer: Date: ATTENTION OBSERVE PRECAUTIONS ELECTROSTATIC SENSITIVE DEVICES For part availability and ordering information please call Toll Free: 800.984.5337 Website: www.marktechopto.com | Email: [email protected] Document No. SPE/LM1-PPP1-01-N1-MT Rev. No. 01 Dimension Drawing Applications: - Indoor and outdoor displays - Backlighting - Coupling into light guides - RGB full color displays Absolute Maximum Ratings at Ta = 25°C Absolute maximum Rating R G B Unit IF 50 25 25 mA IFP 200 100 100 mA Reverse Voltage VR 5 5 5 V Power Dissipation PD 125 100 100 mW Operation Temperature Topr -40~+100 °C Storage Temperature Tstg -40~+100 °C Items Symbol Forward Current*1 Peak Forward Current *2 Tj +110 +110 +110 °C *3 Junction/ambient 1 chips on Rth JA 450 400 450 °C/W Junction/ambient 3 chips on*3 Rth JA 650 580 680 °C/W Junction/solder point 1 chips on Rth JS 300 280 300 °C/W Junction/solder point 3 chips on Rth JS 450 430 480 °C/W Junction Temperature *1 single color light *2 pulse width <=0.1msec duty <=1/10 *3 Rth test condition: Mounted on PC Board FR 4(pad size>=16mm 2) Typical Electrical & Optical Characteristics ( Ta = 25°C) Values Parameter Condition Symbol Unit R G B Wavelength at peak emission IF=20mA λpeak 620 520 465 nm Dominant wavelength IF=20mA λdom 612~622 520~540 460~480 nm Spectral bandwidth at 50% Irel max IF=20mA λ 24 38 28 nm Viewing angle at 50% IV IF=20mA 2 θ½ 120 120 120 Deg. VF(avg) 2.0 3.4 3.4 V Forward voltage IF=20mA VF(max) 2.5 4.0 4.0 V Iv(Min) 180 280 71 mcd Iv(Avg) 300 450 110 mcd IR 10 10 10 µA Luminous Intensity Reverse current IF=20mA (max.) VR=5V 2/6 Format #: COTCO-D-074 REV.4 Document No. SPE/LM1-PPP1-01-N1-MT Rev. No. 01 Standard bins for LM1-PPP1-01-N1-MT(IF = 20mA): Lamps are sorted to Luminous Intensity –IV & Dominant Wavelength –λD bins shown. Orders for LM1-PPP1-01-N1-MT may be filled with any or all bins contained as below. All Luminous Intensity –IV & Dominant Wavelength –λD values shown and specified are at If=20mA. R * S+ U or abov e 450mcd T 280mcd S 180mcd 612nm 622nm Dominant Wavelength (λD) l S+ indicates Luminous Intensity of Red Rank is at S bin or above. G * T+ V or abov e 710mcd U 450mcd T 280mcd 520nm 540nm Dominant Wavelength (λD) l T+ indicates Luminous Intensity of Green Rank is at T bin or above. B * Q+ S or abov e 180mcd R 112mcd Q 71mcd 460nm 480nm Dominant Wavelength (λD) l Q+ indicates Luminous Intensity of Blue Rank is at Q bin or above. Important Notes: 1) All ranks will be included per delivery, rank ratio will be based on Dices distribution. 2) Tolerance of measurement of luminous intensity is ±10% 3) Tolerance of measurement of dominant wavelength is ±1nm. 4) Tolerance of measurement of Vf is ±0.05 V. 5) Packaging methods are available for selection, please refer to PACKAGING STANDARD. 6) Please refer to LED LAMP RELIABILITY TEST STANDARD for reliability test conditions. 7) Please refer to APPLICATION NOTES for Application . 3/6 Format #: COTCO-D-074 REV.4 Document No. SPE/LM1-PPP1-01-N1-MT Rev. No. 01 Graphs 100% BLUE RED GREEN 80% 60% 40% 20% 0% 400 350 450 500 550 600 650 700 Wd(nm) RELATIVE INTENSITY VS, DOMINANT WAVE LENGTH If (mA) If (mA) 100.0 100.0 80.0 80.0 GREEN 60.0 60.0 40.0 40.0 RED BLUE 20.0 0.0 3.0 20.0 Vf(V) 3.4 3.8 4.2 4.6 Vf(V) 0.0 1.8 5.0 FORWARD CURRENT VS. FORWARD VOLTAGE. 2.0 2.2 2.4 2.6 2.8 FORWARD CURRENT VS. FORWARD VOLTAGE. 5.0 5.0 4.0 4.0 RED 3.0 3.0 2.0 2.0 1.0 1.0 BLUE GREEN 0.0 0.0 If(mA) 20.0 40.0 60.0 80.0 100.0 0.0 0.0 If(mA) 20.0 40.0 60.0 80.0 100.0 RELATIVE LUMINOUS INTENSITY VS. FORWARD CURRENT RELATIVE LUMINOUS INTENSITY VS. FORWARD CURRENT. 4/6 Format #: COTCO-D-074 REV.4 Document No. SPE/LM1-PPP1-01-N1-MT Rev. No. 01 Graphs 50% Power Angle : 0 100% 80% 60% 40% 20% -30 -60 -90 0 0% 90 60 30 FAR FIELD PATTERN IF(mA) IF(mA) 70 70 60 60 RED 50 50 40 40 RED 30 30 GREEN GREEN 20 20 BLUE T( C) 0 0 20 60 40 80 BLUE 10 10 T( C) 0 0 100 20 40 60 80 100 60 80 100 IF(mA) IF(mA) 70 70 60 60 RED 50 RED 50 40 40 30 30 GREEN GREEN 20 20 BLUE 10 T( C) 0 0 20 40 60 BLUE 10 80 100 5/6 T( C) 0 0 20 40 Format #: COTCO-D-074 REV.4 Document No. SPE/LM1-PPP1-01-N1-MT Rev. No. 01 Graphs the color coordinates of the mixed light can be expected within the area of the color triangle marked a). the achromatic point (x=0.33,y=0.33) is marked“+” Items Signatures Date Prepared by MaAiQiu 2006-06-27 Checked by XieJH 2006-06-27 Approved by DavidLiu 2006-06-27 FCN# Revision History Rev.No Date Change Description FCN20060218 Data is subject to change without prior notice. Copyright@2002 Cotco International Ltd. 6/6 Format #: COTCO-D-074 REV.4