SPECIFICATION FOR COTCO LED LAMP MODEL No : DOC. No : LS1-TRO1-01-MT 02 11Nov04 Description: 120 Degree 4.0x 4.0mm Side SMD in High Reddish Orange Color with Water Transparent *This specification is only for MT* Dice Material: AlGaInP Confirmed By Customer: Date: ATTENTION OBSERVE PRECAUTIONS ELECTROSTATIC SENSITIVE DEVICES COTCO LUMINANT DEVICE (HUIZHOU) LTD. For part availability and ordering information please call Toll Free: 800.984.5337 Website: www.marktechopto.com | Email: [email protected] Model No. LS1-TRO1-01-MT Doc. No. 02 11Nov04 Applications: Dimension Drawing - Optical indicators - Back lights(LCD, switches, keys, displays, illuminated advertising,general lighting) - Interior automotive lighting.(e.g.dashboard backlighting, etc. ) Coupling into light guides Automobile’s Applications Marker lights (e.g. steps, exit ways, etc) Signal and symbol luminaire Absolute Maximum Ratings at Ta = 25°C Items Symbol Absolute maximum Rating Unit CATHODE SPACING ANODE CATHODE MARKING Forward Current IF 50 mA Peak Forward Current* IFP 200 mA Reverse Voltage VR 5 V Power Dissipation PD 130 mW Operation Temperature Topr -40 ~ + 100 °C Storage Temperature Tstg -40 ~ + 100 °C Junction temperature Tj +110 °C Junction/solder point Rth JS 250 °C /W *pulse width <=0.1msec Dimensions are specified as follows: mm. duty <=1/10 Typical Electrical & Optical Characteristics ( Ta = 25°C) Items Symbol Condition Min. Typ. Max. Unit Forward Voltage VF IF = 20mA --- 2.1 2.6 V Reverse Current IR VR = 5V --- --- 10 µA Luminous Intensity IV IF = 20mA 280 450 --- mcd Dominant Wavelength λD IF = 20mA 612 618 625 nm 2 θ½ IF = 20mA --- 120 --- deg 50% Power Angle I 2/4 COTCO-D-074 REV.1 Model No. LS1-TRO1-01-MT Doc. No. 02 11Nov04 Standard bins for LS1-TRO1-01-MT (IF = 20mA): Lamps are sorted to Luminous Intensity –IV , VF & Dominant Wavelength –λD bins shown. Orders for LS1-TRO1-01-MT may be filled with any or all bins contained as below. All Luminous Intensity –IV , VF & Dominant Wavelength –λD values shown and specified are at If=20mA. * T1+ 710mcd U2 560mcd U1 450mcd T2 355mcd T1 280mcd 612nm 618nm 625nm Dominant Wavelength (λD) * T1+ indicates Luminous Intensity is at T1 bin or above. Forward Voltage (VF) Rank V2 V3 V4 V5 Voltage 1.8-2.0V 2.0-2.2V 2.2-2.4V 2.4-2.6V #The quantity not enough for full reel 1.8-2.2 VF(V) 2.2-2.6 Important Notes: 1) All ranks will be included per delivery, rank ratio will be determined by Cotco. 2) Tolerance of measurement of luminous intensity is ±10% 3) Tolerance of measurement of dominant wavelength is 4) Tolerance of measurement of Vf is ±1nm. ±0.05 V. 5) Packaging methods are available for selection, please refer to PACKAGING STANDARD. #The notice is only apply quantity not enough for full reel. 6) Please refer to LED LAMP RELIABILITY TEST STANDARD for reliability test conditions. 3/4 COTCO-D-074 REV.1 Model No. LS1-TRO1-01-MT Doc. No. 02 11Nov04 Graphs If (mA) 100.0 -50 -60 -40 -20 -30 -10 0.0 Vr(V) 80.0 -10.0 60.0 -20.0 40.0 -30.0 20.0 -40.0 0.0 2.0 2.2 2.4 2.6 2.8 3.0 FIG.1 FORWARD CURRENT VS. FORWARD VOLTAGE. Vf(V) -50.0 Ir(uA) FIG.2 REVERSE CURRENT VS. REVERSE VOLTAGE. Half Power WL=23nm Domi WL= 618nm 5.0 4.0 100% 3.0 75% 2.0 50% 1.0 I (RELATIVE INTENSITY) 25% If(mA) 0.0 0.0 WL(nm) 500 600 700 800 900 FIG.4 RELATIVE INTENSITY VS. WAVE LENGTH. 0% 400 20.0 40.0 60.0 80.0 100.0 FIG.3 FORWARD CURRENT. IF(mA) 100 50% Power Angle : 80 Rth j-s=250 C/W 60 Ie(%) 0 100% 80% 40 60% 20 Rth j-a=350 C/W 40% T ( C) 0 0 20 40 60 80 20% 100 FIG.5 MAXIMUM FORWARD DC CURRENT VS TEMPERATURE. DERATING BASED ON Tjmax=110 C -90 -60 -30 0 30 60 90 0% FIG.6 SPATIAL DISTRIBUTION. Rth test condition: Mounted on PC Board FR 4(pad size>=16mm2) Items Prepared by Signatures Date Meiliping 2004/11/11 Checked by TangShR 2004/11/11 Approved by Thomson 2004/11/11 ECN# Revision History DOC. No. CHANGE DESCRIPTION 02 11Nov04 Change Dimension Drawing, IV form, max current from 50 to 20, PD from 150 to 55, Graphs. ECN-H20040299 Data is subject to change without prior notice. Copyright@2002 Cotco International Ltd. Obsoletes Doc: A 28Jul03. 4/4 COTCO-D-074 REV.1