FREQUENCY QEUM5 / QEUM5-GW UM5 Crystal – Through Hole & Gull Wing SMD packaged Specification (Rev-C) Electrical Characteristics ......................................................P01 ESR vs. frequency range and Mode of vibration ..................P01 Mechanical Characteristics ...................................................P01 Ordering Information .............................................................P02 QEUM5-GW Tape Drawing ..................................................P02 Frequency QEUM5 / QEUM5-GW UM5 Crystal – Through Hole & Gull Wing SMD packaged October 03rd, 2006 Specification (rev-C) Electrical Characteristics Electrical Parameters Unit Frequency range MHz Minimum Typical Maximum 10 Test conditions 200 Frequency Tolerance (at 25°C) ± ppm 10 30 50 Refer to Ordering Information ± ppm 10 30 50 Refer to Ordering Information -20/+70 -40/+85 Refer to Ordering Information Temperature Stability Operating Temperature Range °C Storage temperature range °C Shunt capacitance C0 pF Load capacitance pF 10pF ~ 32pF or series Drive level µW 100 -40 +85 7.0 ± ppm Aging (First Year) MΩ Insulator resistance Refer to Ordering Information 500 3 Ref at 25°C 500 At 100VDC Customized specification upon request ESR vs. frequency range and Mode of vibration Frequency range (MHz) Mode of vibration Max ESR (Ω) Frequency range (MHz) Mode of vibration Max ESR (Ω) 10.000 to 19.999 20.000 to 40.000 30.000 to 79.999 Fund. Fund. 3rd 60 40 100 80.000 to 105.000 60.000 to 129.999 130.000 to 200.000 3rd 5th 7th 80 200 180 Mechanical Characteristics QEUM5 Ø 0.35 ± 0.05mm QEUM5-GW H 6 max [0.236] L 3.2 max [0.125] 1 TEMEX reserves the right to modify herein specifications and informations at any time when necessary to provide optimum performance and cost. Frequency QEUM5 / QEUM5-GW UM5 Crystal – Through Hole & Gull Wing SMD packaged October 03rd, 2006 Specification (rev-C) Marking for QEUM5 Line 1 VRDxxx (Temex code) Marking for QEUM5-GW VRSxxx (Temex code) Mechanical conditions Vibration 10g, 10Hz to 2KHz according to standard CEI 68-2-63 Shocks 100g, 6ms according to standard CEI 68-2-27 Line 2 Frequency in MHz Frequency in MHz (6 digits) (6 digits) Line 3 YYWW – production code YYWW – production code Note : QEUM5 & QEUM5-GW are fully RoHS compliant. Ordering Information Part numbering system HQ QEUM5 1 30 Package type Vibration mode Frequency tolerance 1 = Fundamental rd 3 = 3 Overtone th 5 = 5 Overtone th 7 = 7 Overtone 10=±10ppm 30=±30ppm 50=±30ppm QEUM5 : UM5 Through Hole packaged QEUM5-GW : UM5 Gull Wing SMD packaged 50 16 25.000MHZ Operating temperature range Frequency stability Load Capacitance Nominal Frequency (MHz) D=-40°C F= -30°C H=-20°C J=-10°C L=0°C M=+50°C N=+55°C O=+60°C Q=+70°C T=+85°C 10=±10ppm 30=±20ppm 50=±30ppm 16=16pF Please enter the nominal frequency Please, enter the value of load capacitance QEUM5-GW Tape Drawing Item Pitch of components Pitch of sprocket hole Length from hole to component center Width of carrier tape Width of adhesive tape Gap of hold down tape Diameter of feed hole Diameter of sprocket hole Symbol P PO P1 Dimensions 12 ± 0.1 4 ± 0.1 2 ± 0.1 W W1 W2 DO D1 24 ± 0.3 11.5 ± 0.1 1.75 ± 0.1 Ø 1.5 min Ø 1.5 ± 0.1 Note 1 : Metal Clips are opposed to the the sprocket holes. Note 2 : Multiple is 1Kpcs per reel. 2 TEMEX reserves the right to modify herein specifications and informations at any time when necessary to provide optimum performance and cost.