SCHRACK General Purpose Relays Power PCB Relay RZ n 1 pole 12 / 16 A, 1 CO or 1 NO contact n DC-coil 400 mW n 5 kV / 10 mm coil-contact, reinforced insulation n Ambient temperature 85°C, HOT version for 105°C n Product in accordance to IEC60335-1 Applications Household appliances, boiler control, timers, garage door control, POS automation F0305-A Approvals V REG.-Nr. C693, Z E214025 Technical data of approved types on request Contact data Contact configuration Contact set Type of interruption Rated voltage / max. switching voltage AC Rated current Maximum breaking capacity AC Contact material Rated frequency of operation with / without load Operate- / release time DC coil Bounce time NO / NC contact Contact ratings Type Contact IEC 61810 RZ03-1.4-D... NO RZ03-1C4-D... CO RZ03-1.4-D... NO RZ01-1.4-D... NO RZ01-1C4-D... CO RZ01-1.4-D... NO RZH3-1.4-D... NO RZH3-1C4-D... CO UL 508 RZ03-1.4-D... NO RZ03-1.4-D... NO RZ03-1.4-D... NO RZ03-1.4-D... NO RZH3-1.4-D... NO Approvals in process RZ03-1.3-D... NO RZ03-1.3-D... CO RZ03-1.3-D... NO 1 CO or 1 NO contact single contact micro disconnection 250 / 400 VAC 12 A 16 A 3000 VA 4000 VA AgNi 90/10 or AgSnO 6 / 1200 min-1 max 8 / 6 ms max 4 / 6 ms Load Ambient temp. [°C] Cycles 85°C 85°C 70°C 85°C 85°C 70°C 105°C 105°C 30x103 10x103 50x103 50x103 30x103 100x103 100x103 10x103 B300 R300 1/2 hp, 125 VAC 1 hp, 277 VAC 10 A, 250 VAC 85°C 85°C 85°C 85°C 105°C 6x103 6x103 6x103 6x103 150x103 16 A, 250 VAC 16 A, 250 VAC 1 hp, 277 VAC 85°C 85°C 85°C 50x103 10x103 30x103 16 A, 16 A, 16 A, 12 A, 12 A, 12 A, 10 A, 16 A, 250 VAC 250 VAC 250 VAC 250 VAC 250 VAC 250 VAC 250 VAC 250 VAC Coil data Rated coil voltage range Operative range to IEC 61810 standard / HOT-version Coil insulation system according UL1446 5...48 VDC 2 / 90...110% URTD class F 1 Datasheet Rev. IK1 Issued 2009/11 www.tycoelectronics.com www.schrackrelays.com Dimensions are in mm unless otherwise specified and are shown for reference purposes only. Product specification according to IEC 61810-1. Product data, technical parameters, test conditions and processing information only to be used together with the 'Definitions' section in the catalogue or at schrackrelays.com in the ‘Schrack’ section. Specifications subject to change. SCHRACK General Purpose Relays Power PCB Relay RZ (Continued) Coil versions, DC-coil Coil Rated Operate Release Coil Rated coil code voltage voltage voltage resistance power VDC VDC VDC c mW D005 5 3.5 0.5 60+10% 420 D006 6 4.2 0.6 90+10% 400 D009 9 6.3 0.9 200+10% 400 D012 12 8.4 1.2 360+10% 400 D024 24 16.8 2.4 1440+10% 400 D048 48 33.6 4.8 5730+10% 400 All figures are given for coil without preenergization, at ambient temperature +23°C Continuous thermal load > 10 A at 105°C requires reduction of coil power to 64% of rated power after 100 ms. Other coil voltages on request PCB layout / terminal assignment Bottom view on solder pins 12 A, pinning 3.5 mm 1 CO contact S0163-BG 1 NO contact Insulation Dielectric strength coil-contact circuit open contact circuit Clearance / creepage coil-contact circuit Material group of insulation parts Tracking index of relay base Insulation to EN61810-1 Type of insulation coil-contact circuit open contact circuit Rated insulation voltage Pollution degree 12 A version 16 A version Rated voltage system Overvoltage category 5000 Vrms 1000 Vrms W 10 / 10 mm IIIa PTI 250 V reinforced micro disconnection 250 V 3 3 3 2 240 V 230 / 400 V III S0163-BH 16 A, pinning 5 mm 1 CO contact Other data Mechanical endurance > 10 x 106 cycles Material RoHS - Directive 2002/95/EC compliant Resistance to heat and fire according EN60335-1, par.30 Environment Ambient temperature range Standard version -40...+85°C HOT version -40...+105°C Vibration resistance (function; 30...500 Hz) closing NO contact > 15 g opening NO contact > 20 g opening NC contact > 5g Shock resistance (destruction) 100 g Category of protection RTII - flux proof, RTIII - wash tight Processing Mounting pcb Mounting distance Standard version W 0 mm HOT version W 2 mm Resistance to soldering heat flux proof version 270°C / 10 s Relay weight 10 g Packaging unit 20 / 500 pcs S0163-BE 1 NO contact S0163-BF Recommended pcb hole for manual mounting: k1.3 For automated mounting please ask for detailed drawing. 2 Datasheet Rev. IK1 Issued 2009/11 www.tycoelectronics.com www.schrackrelays.com Dimensions are in mm unless otherwise specified and are shown for reference purposes only. Product specification according to IEC 61810-1. Product data, technical parameters, test conditions and processing information only to be used together with the 'Definitions' section in the catalogue or at schrackrelays.com in the ‘Schrack’ section. Specifications subject to change. SCHRACK General Purpose Relays Power PCB Relay RZ (Continued) Dimensions 12 A, pinning 3.5 mm 16 A, pinning 5 mm S0557-AA S0557-AB Product key Typical product key RZ 0 3 -1C 4 -D012 Type RZ Power PCB Relay RZ Version 0 standard version H HOT-version Version 1 3.5 mm pinning, 12 A 3 5 mm double pinning, 16 A Contact configuration 1A 1 form A (NO contact) 1C 1 form C (CO contact) Contact material 4 AgNi 90/10 3 AgSnO2 Coil version Coil code: please refer to coil versions table Sealing level blank standard (RT II - flux proof) W wash tight (RT III - wash tight) 3 Datasheet Rev. IK1 Issued 2009/11 www.tycoelectronics.com www.schrackrelays.com Dimensions are in mm unless otherwise specified and are shown for reference purposes only. Product specification according to IEC 61810-1. Product data, technical parameters, test conditions and processing information only to be used together with the 'Definitions' section in the catalogue or at schrackrelays.com in the ‘Schrack’ section. Specifications subject to change. SCHRACK General Purpose Relays Power PCB Relay RZ (Continued) Product key RZ01-1A3-D005 RZ01-1A3-D006 RZ01-1A3-D012 RZ01-1A3-D024 RZ01-1A3-D048 RZ01-1A4-D005 RZ01-1A4-D006 RZ01-1A4-D009 RZ01-1A4-D012 RZ01-1A4-D024 RZ01-1A4-D048 RZ01-1C3-D005 RZ01-1C3-D006 RZ01-1C3-D012 RZ01-1C3-D024 RZ01-1C3-D048 RZ01-1C4-D005 RZ01-1C4-D006 RZ01-1C4-D009 RZ01-1C4-D012 RZ01-1C4-D024 RZ01-1C4-D048 RZ03-1A3-D005 RZ03-1A3-D006 RZ03-1A3-D012 RZ03-1A3-D024 RZ03-1A3-D048 RZ03-1A4-D005 RZ03-1A4-D006 RZ03-1A4-D009 RZ03-1A4-D012 RZ03-1A4-D024 RZ03-1A4-D048 RZ03-1C3-D005 RZ03-1C3-D006 RZ03-1C3-D012 RZ03-1C3-D024 RZ03-1C3-D048 RZ03-1C4-D005 RZ03-1C4-D006 RZ03-1C4-D009 RZ03-1C4-D012 RZ03-1C4-D024 RZ03-1C4-D048 RZH3-1C4-D012 RZH3-1C4-D024 RZH3-1A4-D009 RZH3-1A4-D012 RZH3-1A4-D024 Version 12A pinning 3.5 mm flux proof Contacts 1 NO (form A) Contact material AgSnO2 AgNi 90/10 1 CO (form C) AgSnO2 AgNi 90/10 16A pinning 5 mm flux proof 1 NO (form A) AgSnO2 AgNi 90/10 1 CO (form C) AgSnO2 AgNi 90/10 16A, 105°C pinning 5 mm flux proof 1 NO (form A) Coil 5 VDC 6 VDC 12 VDC 24 VDC 48 VDC 5 VDC 6 VDC 9 VDC 12 VDC 24 VDC 48 VDC 5 VDC 6 VDC 12 VDC 24 VDC 48 VDC 5 VDC 6 VDC 9 VDC 12 VDC 24 VDC 48 VDC 5 VDC 6 VDC 12 VDC 24 VDC 48 VDC 5 VDC 6 VDC 9 VDC 12 VDC 24 VDC 48 VDC 5 VDC 6 VDC 12 VDC 24 VDC 48 VDC 5 VDC 6 VDC 9 VDC 12 VDC 24 VDC 48 VDC 12 VDC 24 VDC 9 VDC 12 VDC 24 VDC Part number 3-1415899-7 3-1415899-8 3-1415899-9 4-1415899-0 4-1415899-1 1415899-1 1415899-2 1415899-3 1415899-4 1415899-5 1415899-6 4-1415899-2 4-1415899-3 4-1415899-4 4-1415899-5 4-1415899-6 1415899-7 1415899-8 1415899-9 1-1415899-0 1-1415899-1 1-1415899-2 4-1415899-7 4-1415899-8 4-1415899-9 5-1415899-0 5-1415899-1 1-1415899-3 1-1415899-4 1-1415899-5 1-1415899-6 1-1415899-7 1-1415899-8 5-1415899-2 5-1415899-3 5-1415899-4 5-1415899-5 5-1415899-6 1-1415899-9 2-1415899-0 2-1415899-1 2-1415899-2 2-1415899-3 2-1415899-4 2-1415899-5 2-1415899-6 2-1415899-7 2-1415899-8 2-1415899-9 4 Datasheet Rev. IK1 Issued 2009/11 www.tycoelectronics.com www.schrackrelays.com Dimensions are in mm unless otherwise specified and are shown for reference purposes only. Product specification according to IEC 61810-1. Product data, technical parameters, test conditions and processing information only to be used together with the 'Definitions' section in the catalogue or at schrackrelays.com in the ‘Schrack’ section. Specifications subject to change.