CPI VTC-6260E4

cpi[
VTC-6260E4 is a 125 W, CW Traveling-Wave Amplifier, 5.850 GHz to 6.425 GHz,
Periodic-Permanent-Magnet Focused, Coaxial Input, Coaxial Output, and Conduction
Cooled.
Custom configurations are also available. These variations in the performance and
configuration include: cooling method (affects average power level), mechanical
configuration, electrical and RF connections, & single stage depressed collector.
Typical Operating Parameters
Features
•
•
•
•
•
•
•
•
125 Watts
5.850 GHz - 6.425 GHz
PPM Focused
Coaxial Input
Coaxial Output
Any Mounting Position
Weight: 6 lb. maximum
Conduction Cooled
Heater
Voltage
Heater
Surge
Current
Helix
Voltage
Collector
Voltage
Cathode
Current
Helix
Current
Parameters:
Units:
Maximum:
Ef
V
6.1
If
A
5
Ew
kVdc
6
Eb
kVdc
4.0
Ik
mAdc
180
Iw
mAdc
15
Minimum:
5.5
---
5
2.8
---
---
Cathode
Warm-up
Time
Tk
Minutes
--3
Load
VSWR
Base
Temperature
Environment
Parameters:
Units:
Maximum:
Minimum:
Drive
Power
Pd
mW
10
---
1.7:1
---
°C
105
---
-------
Ef
V
5.8
Ew
kVdc
5.7
Eb
kVdc
Ew/2
Test Conditions:
VSWR
1.1:1 (nominal)
The values listed above represent specified limits for the product and are subject to change. The data should be used
for basic information only. Formal, controlled specifications may be obtained from CPI for use in equipment design.
For additional information on CPI MPP products contact:
CPI MPP, Helix TWT Operation - 811 Hansen Way, Palo Alto, CA 94303-0750
Phone: 650-846-3172, Fax: 650-494-8779, Email: marketing@mpp.cpii.com, www.cpii.com/mpp