110E Vishay Spectrol Mechanical Encoder FEATURES • Cost Effective - Eliminates A/D Converters • High Resolution - Up to 36 Positions • Stability - Operating Range of - 40°C to + 105°C • Variability - Horizontal and Vertical Mounting The Model 110E is a 7/8” square mechanical encoder which provides a 2 - bit grey code for relative reference and a 4 - bit grey code for absolute reference applications. Manually operated it has a rotational life of 100,000 shaft revolutions, a positive dentent feel and can be combined with a second modular section in a concentric - shaft construction. Its small size makes it suitable for panel-mounted applications where the need for costly front - panel displays can be completely eliminated. DIMENSIONS in inches 2 - BIT, 36 - POSITION INCREMENTAL OUTPUT STEP 1 G PC TERMINALS TYPE B - 110 0.343 0.320 4 - BITS, 6 - POSITION INCREMENTAL OUTPUT 0.830 ± 0.005 SQUARE 2 + 0.002 0.250 - 0.001 3/8 - 32 UNEF - 2A 1 2 STEP 1 0.615 4 5 6 0.050 (2X) 7 0.900 0.450 8 9 0.625 TYPE “B” MTG WITH BRACKET 0.245 0.250 10 11 7 0.100 (2X) 8 9 Ø.047 (7X) 0.300 10 0.600 11 12 12 13 13 14 14 2 - BIT 16 POS. PC TERMINALS TYPE C - 30 15 16 17 0.200 REF SOLDER HOOK TERMINALS (ON 0.200 SPACING) 0.156 19 20 Output Codes At start position, step 1, is with shaft flat at 12 o’ clock position when looking at shaft end with terminals down. 0.100 21 22 24 4 - BIT 16 POS. 0.343 18 23 8 4 6 16 G 3 0.100 (2X) 5 15 2 2 0.100 TYP 0.250 3 4 1 2 - BIT 24 POS. 0.156 0.363 0.830 ± 0.005 0.450 (2X) SQUARE Ø.047 25 0.415 0.600 (2X) 0.320 (2X) 26 27 0.020 X 0.025 THK 1 4 2 G 8 28 TYPE “C” MTG WITH BRACKET 29 0.100 TYP 0.100 (2X) 0.100 (2X) 30 32 FLATTED SHAFT 3/4”, 7/8”, F.M.S. 33 ± 0.005 0.068 34 35 36 www.vishay.com 136 0.005/0.010 R SHAFT DIMENSIONS 31 2 - BIT 36 POS. 0.060 0.206 ± 0.010 SUGGESTED 0.218 ± 0.005 0.047 0.047 Ø SUGGESTED 0.375 For technical questions, contact: [email protected] Document Number: 57089 Revision: 05-Aug-04 110E Vishay Spectrol Mechanical Encoder ELECTRICAL SPECIFICATIONS Output 2 - bit grey code, channel L leads channel R by 90 degrees electrically in the CW direction 4 bi - grey code, absolute electrical position output 5Ω maximum Closed Circuit Resistance 100KΩ minimum Open Circuit Resistance Contact Rating Resistance load 250mA at 28VDC 1.5mA at 115VDC 150mA at 14VDC Switching Loads Bounce 5ms/cycle at 15 RPM Dielectric Withstanding Voltage 1000VAC at sea level Electrical Travel Continuous Operating Speed 50 RPM maximum MECHANICAL SPECIFICATIONS ENVIRONMENTAL SPECIFICATIONS Temperature Range - 40°C to + 105°C (Operating temperature) - 55°C to + 120°C (Storage temperature) Humidity Per MIL-STD 202, Method 106C Insulation resistance shall be 1 MΩ maximum of a relative humidity 90% @ 25°C Shock Per MIL-STD 202, Method 213, Test Condition G consisting of 1 MIL-STD Rotational Torque 3.5 oz - in (2.16 - 3.60 Ncm) Mechanical Travel Continuous Panel Mounting Torque 7 lbs - in (1.13 Nm) maximum Shaft Load Force 10 lbs - in (1.13 Nm) maximum Shaft Pull Force 10 lbs - in maximum Terminals Standard PC style, 3 terminals on 0.100” (2.54mm) grid - in - line perpendicular or parallel to shaft. Solder hook available on 0.200” grid Molded Construction Molding compound used for housing/bushing and shaft has a UL94V - 2 rating Rotational Life 100,000 detented cycles at rated load typical (1 cycle = 720 degrees) PACKAGING Box of 50 pieces ORDERING INFORMATION 110E MODEL 1 A BUSHING 48 SINGLE SHAFT FMS CODED IN 64ths F 204P 2-4 - BIT GREY CODE OPTIONS P 110E 1 = at 9’0 clock 0 = None A = 3/8 (9.53mm) dia x 1/4 (6.35mm) long G = 3/8 (9.53mm) dia x 3/8 (9.53mm) long 48 = 0.750” 56 = 0.875” S: Slotted F: Flatted 204P = 4 cycles/rev 16 detents/rev 206P = 6 cycles/rev 24 detents/rev 209P = 9 cycles/rev 36 detents/rev B: PC terminals straight (horizontal mount) C: PC terminals bent back (vertical mount) Type C - 30 P: Type B with mounting bracket D: Type C with mounting bracket S: Solder Hook 416P = 16 electrical positions/rev 16 detents/rev Hardware not included SAP PART NUMBERING GUIDELINES 1 1 0 MODEL E W BUSHING 1 G PEG See the end of this data book for conversion tables Document Number: 57089 Revision: 05-Aug-04 H SHAFT F P LEADS 2 0 4 CODE OPTIONS For technical questions, contact: [email protected] P B 2 5 PACKAGING SPECIAL www.vishay.com 137 Legal Disclaimer Notice Vishay Notice Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. Document Number: 91000 Revision: 08-Apr-05 www.vishay.com 1