25CTQ... Series Vishay High Power Products Schottky Rectifier, 2 x 15 A FEATURES • • • • • 150 °C TJ operation Center tap TO-220 package Low forward voltage drop High frequency operation High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance • Guard ring for enhanced ruggedness and long term reliability • Designed and qualified for industrial level Base 2 common cathode Anode TO-220AB Anode 2 1 Common 3 cathode DESCRIPTION The 25CTQ... center tap Schottky rectifier series has been optimized for very low forward voltage drop, with moderate leakage. The proprietary barrier technology allows for reliable operation up to 150 °C junction temperature. Typical applications are in switching power supplies, converters, freewheeling diodes, and reverse battery protection. PRODUCT SUMMARY IF(AV) 2 x 15 A VR 35 to 45 V MAJOR RATINGS AND CHARACTERISTICS SYMBOL CHARACTERISTICS IF(AV) Rectangular waveform VRRM Range IFSM VF TJ Range VALUES UNITS 30 A 35 to 45 V tp = 5 µs sine 990 A 15 Apk, TJ = 125 °C (per leg) 0.50 V - 55 to 150 °C VOLTAGE RATINGS PARAMETER Maximum DC reverse voltage Maximum working peak reverse voltage SYMBOL VR VRWM 25CTQ035 25CTQ040 25CTQ045 UNITS 35 40 45 V ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS 30 A Maximum average forward current See fig. 5 IF(AV) Maximum peak one cycle non-repetitive surge current per leg See fig. 7 IFSM Non-repetitive avalanche energy per leg EAS TJ = 25 °C, IAS = 3.0 A, L = 4.40 mH 20 mJ IAR Current decaying linearly to zero in 1 µs Frequency limited by TJ maximum VA = 1.5 x VR typical 3 A Repetitive avalanche current per leg Document Number: 93291 Revision: 22-Aug-08 50 % duty cycle at TC = 102 °C, rectangular waveform 5 µs sine or 3 µs rect. pulse 10 ms sine or 6 ms rect. pulse Following any rated load condition and with rated VRRM applied For technical questions, contact: [email protected] 990 A 250 www.vishay.com 1 25CTQ... Series Vishay High Power Products Schottky Rectifier, 2 x 15 A ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL TEST CONDITIONS 15 A Maximum forward voltage drop per leg See fig. 1 VFM (1) TJ = 25 °C 30 A 15 A TJ = 125 °C 30 A Maximum reverse leakage current per leg See fig. 2 IRM (1) TJ = 25 °C VR = Rated VR TJ = 125 °C VALUES UNITS 0.56 0.71 V 0.50 0.64 1.75 mA 70 Maximum junction capacitance per leg CT VR = 5 VDC (test signal range 100 kHz to 1 MHz) 25 °C 900 pF Typical series inductance per leg LS Measured lead to lead 5 mm from package body 8.0 nH 10 000 V/µs VALUES UNITS - 55 to 150 °C Maximum voltage rate of change Note (1) Pulse width < 300 µs, duty cycle < 2 % dV/dt Rated VR THERMAL - MECHANICAL SPECIFICATIONS PARAMETER SYMBOL Maximum junction and storage temperature range TEST CONDITIONS TJ, TStg Maximum thermal resistance, junction to case per leg RthJC Maximum thermal resistance, junction to case per package Typical thermal resistance, case to heatsink RthCS DC operation See fig. 4 3.25 DC operation 1.63 Mounting surface, smooth and greased 0.50 2.0 Approximate weight Mounting torque °C/W g 0.07 oz. minimum 6 (5) kgf · cm maximum 12 (10) (lbf · in) 25CTQ035 Marking device Case style TO-220AB 25CTQ040 25CTQ045 www.vishay.com 2 For technical questions, contact: [email protected] Document Number: 93291 Revision: 22-Aug-08 25CTQ... Series 1000 1000 IR - Reverse Current (mA) IF - Instantaneous Forward Current (A) Schottky Rectifier, 2 x 15 A Vishay High Power Products 100 10 TJ = 150 °C TJ = 125 °C TJ = 25 °C 1 TJ = 150 °C 100 TJ = 125 °C 10 TJ = 100 °C 1 TJ = 75 °C TJ = 50 °C 0.1 0.01 TJ = 25 °C 0.1 0.001 0 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 5 10 15 25 20 30 35 40 45 VR - Reverse Voltage (V) VFM - Forward Voltage Drop (V) Fig. 1 - Maximum Forward Voltage Drop Characteristics (Per Leg) Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage (Per Leg) CT - Junction Capacitance (pF) 1000 TJ = 25 °C 100 10 0 20 30 40 50 ZthJC - Thermal Impedance (°C/W) VR - Reverse Voltage (V) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage (Per Leg) 10 1 0.1 0.01 0.001 0.00001 Single pulse (thermal resistance) 0.0001 0.001 PDM D = 0.50 D = 0.33 D = 0.25 D = 0.17 D = 0.08 0.01 t1 t2 Notes: 1. Duty factor D = t1/t2 2. Peak TJ = PDM x ZthJC + TC 0.1 1 10 100 t1 - Rectangular Pulse Duration (s) Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics (Per Leg) Document Number: 93291 Revision: 22-Aug-08 For technical questions, contact: [email protected] www.vishay.com 3 25CTQ... Series Vishay High Power Products Schottky Rectifier, 2 x 15 A 12 25CTQ RthJC (DC) = 3.25 °C/W 150 140 130 DC 120 110 D = 0.08 D = 0.17 D = 0.25 D = 0.33 D = 0.50 10 Average Power Loss (W) Allowable Case Temperature (°C) 160 8 RMS limit 6 4 DC 2 100 0 0 5 10 15 25 20 0 2 4 6 8 10 12 14 16 18 20 22 IF(AV) - Average Forward Current (A) Fig. 6 - Forward Power Loss Characteristics (Per Leg) IFSM - Non-Repetitive Surge Current (A) IF(AV) - Average Forward Current (A) Fig. 5 - Maximum Allowable Case Temperature vs. Average Forward Current (Per Leg) 1000 At any rated load condition and with rated VRRM applied following surge 100 10 100 1000 10000 tp - Square Wave Pulse Duration (µs) Fig. 7 - Maximum Non-Repetitive Surge Current (Per Leg) L D.U.T. IRFP460 Rg = 25 Ω Current monitor High-speed switch Freewheel diode + Vd = 25 V 40HFL40S02 Fig. 8 - Unclamped Inductive Test Circuit www.vishay.com 4 For technical questions, contact: [email protected] Document Number: 93291 Revision: 22-Aug-08 25CTQ... Series Schottky Rectifier, 2 x 15 A Vishay High Power Products ORDERING INFORMATION TABLE Device code 25 C T Q 045 - 1 2 3 4 5 6 1 - Current rating (25 = 25 A) 2 - Circuit configuration: C = Common cathode 3 - Package: T = TO-220 4 - Schottky “Q” series 5 - Voltage ratings 6 - None = Standard production 035 = 35 V 040 = 40 V 045 = 45 V PbF = Lead (Pb)-free Tube standard pack quantity: 50 pieces LINKS TO RELATED DOCUMENTS Dimensions http://www.vishay.com/doc?95222 Part marking information http://www.vishay.com/doc?95225 SPICE model http://www.vishay.com/doc?95285 Document Number: 93291 Revision: 22-Aug-08 For technical questions, contact: [email protected] www.vishay.com 5 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1