STD1862 NPN Silicon Transistor Descriptions PIN Connection • Audio power amplifier C • High current application E B B C Features E • High current : IC=2A • Complementary pair with STB1277 TO-92 Ordering Information Type NO. Marking STD1862 STD1862 Package Code TO-92 Absolute maximum ratings (Ta=25°C) Characteristic Symbol Ratings Unit Collector-Base voltage VCBO 30 V Collector-Emitter voltage VCEO 30 V Emitter-Base voltage VEBO 5 V Collector current IC 2 A Collector dissipation PC 500 mW Junction temperature Tj 150 °C Storage temperature Tstg -55~150 °C Electrical Characteristics Characteristic (Ta=25°C) Symbol Test Condition Min. Typ. Max. Unit Collector-Base breakdown voltage BVCBO IC=100μA, IE=0 30 - - V Collector-Emitter breakdown voltage BVCEO IC=10mA, IB=0 30 - - V Emitter-Base breakdown voltage BVEBO IE=1mA, IC=0 5 - - V Collector cut-off current ICBO VCB=30V, IE=0 - - 100 nA Emitter cut-off current IEBO VEB=5V, IC=0 - - 100 nA DC current gain hFE* VCE=2V, IC=500mA 100 - 320 - Base-Emitter on voltage VBE(on) VCE=2V, IC=500mA - - 1 V Collector-Emitter saturation voltage VCE(sat) IC=2A, IB=0.2A - - 0.8 V VCB=5V, IC=50mA - 170 - MHz VCB=10V, IE=0, f=1MHz - 48 - pF Transition frequency Collector output capacitance * fT Cob : hFE rank / O : 100~200, Y : 160~320 KSD-T0A023-001 1 STD1862 Electrical Characteristic Curves Fig. 2 IC - VBE ㎽ Fig. 1 PC - Ta Fig. 3 I C - VCE Fig. 4 VCE(sat) - IC Fig. 5 hFE - IC KSD-T0A023-001 2 STD1862 Outline Dimension KSD-T0A023-001 3 STD1862 The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. KSD-T0A023-001 4