TLM.310. Vishay Telefunken SMD LED in P–LCC–2 Package Color Type Technology High efficiency red Soft orange Yellow Green Pure green TLMH3100 TLMO3100 TLMY3100 TLMG3100 TLMP3100 GaAsP on GaP GaAsP on GaP GaAsP on GaP GaP on GaP GaP on GaP Angle of Half Intensity ±ö 60° 60° 60° 60° 60° Description These devices have been designed to meet the increasing demand for surface mounting technology. The package of the TLM.310. is the P–LCC–2 (equivalent to a size B tantalum capacitor). It consists of a lead frame which is surrounded with a white thermoplast. The reflector inside this package is filled up with clear epoxy. Features D D D D D SMD LEDs with exceptional brightness Luminous intensity categorized Compatible with automatic placement equipment 94 8553 EIA and ICE standard package Compatible with infrared, vapor phase and wave solder processes according to CECC D Available in 8 mm tape D Low profile package D Non-diffused lens: excellent for coupling to light pipes and backlighting D Low power consumption D Luminous intensity ratio in one packaging unit IVmax/IVmin x 2.0 Applications Automotive: backlighting in dashboards and switches Telecommunication: indicator and backlighting in telephone and fax Indicator and backlight for audio and video equipment Indicator and backlight in office equipment Flat backlight for LCDs, switches and symbols General use Document Number 83032 Rev. A1, 04-Feb-99 www.vishay.de • FaxBack +1-408-970-5600 1 (12) TLM.310. Vishay Telefunken Absolute Maximum Ratings Tamb = 25_C, unless otherwise specified TLMH3100 ,TLMO3100 ,TLMY3100 ,TLMG3100 ,TLMP3100 Parameter Reverse voltage DC forward current Surge forward current Power dissipation Junction temperature Operating temperature range Storage temperature range Soldering temperature Thermal resistance junction/ambient Test Conditions Tamb ≤ 60°C tp ≤ 10 ms Tamb ≤ 60°C t≤5s mounted on PC board (pad size > 16 mm2) Symbol VR IF IFSM PV Tj Tamb Tstg Tsd RthJA Value 6 30 0.5 100 100 –40 to +100 –55 to +100 260 400 Unit V mA A mW °C °C °C °C K/W Optical and Electrical Characteristics Tamb = 25_C, unless otherwise specified High efficiency red (TLMH3100 ) Parameter Luminous intensity Dominant wavelength Peak wavelength Angle of half intensity Forward voltage Reverse voltage Junction capacitance Test Conditions IF = 10 mA IF = 10 mA IF = 10 mA IF = 10 mA IF = 20 mA IR = 10 mA VR = 0, f = 1 MHz Type Test Conditions IF = 10 mA IF = 10 mA IF = 10 mA IF = 10 mA IF = 20 mA IR = 10 mA VR = 0, f = 1 MHz Type Symbol IV ld lp ϕ VF VR Cj Min 2.5 612 Symbol IV ld lp ϕ VF VR Cj Min 2.5 598 6 Typ 6 Max 625 635 ±60 2.4 15 15 3 Unit mcd nm nm deg V V pF Soft orange (TLMO3100 ) Parameter Luminous intensity Dominant wavelength Peak wavelength Angle of half intensity Forward voltage Reverse voltage Junction capacitance www.vishay.de • FaxBack +1-408-970-5600 2 (12) 6 Typ 8 Max 611 605 ±60 2.4 15 15 3 Unit mcd nm nm deg V V pF Document Number 83032 Rev. A1, 04-Feb-99 TLM.310. Vishay Telefunken Yellow (TLMY3100 ) Parameter Luminous intensity Dominant wavelength Peak wavelength Angle of half intensity Forward voltage Reverse voltage Junction capacitance Test Conditions IF = 10 mA IF = 10 mA IF = 10 mA IF = 10 mA IF = 20 mA IR = 10 mA VR = 0, f = 1 MHz Type Test Conditions IF = 10 mA IF = 10 mA IF = 10 mA IF = 10 mA IF = 20 mA IR = 10 mA VR = 0, f = 1 MHz Type Test Conditions IF = 10 mA IF = 10 mA IF = 10 mA IF = 10 mA IF = 20 mA IR = 10 mA VR = 0, f = 1 MHz Type Symbol IV ld lp ϕ VF VR Cj Min 2.5 581 Symbol IV ld lp ϕ VF VR Cj Min 4 562 Symbol IV ld lp ϕ VF VR Cj Min 1 555 6 Typ 6 Max 594 585 ±60 2.4 15 15 3 Unit mcd nm nm deg V V pF Green (TLMG3100 ) Parameter Luminous intensity Dominant wavelength Peak wavelength Angle of half intensity Forward voltage Reverse voltage Junction capacitance 6 Typ 9 Max 575 565 ±60 2.4 15 15 3 Unit mcd nm nm deg V V pF Pure green (TLMP3100 ) Parameter Luminous intensity Dominant wavelength Peak wavelength Angle of half intensity Forward voltage Reverse voltage Junction capacitance Document Number 83032 Rev. A1, 04-Feb-99 6 Typ 4 Max 565 555 ±60 2.4 15 15 3 Unit mcd nm nm deg V V pF www.vishay.de • FaxBack +1-408-970-5600 3 (12) TLM.310. Vishay Telefunken Typical Characteristics (Tamb = 25_C, unless otherwise specified) 0° Iv rel – Relative Luminous Intensity PV – Power Dissipation ( mW ) 125 100 75 50 25 10 ° 20 ° 30° 40° 1.0 0.9 50° 0.8 60° 70° 0.7 80° 0 0 20 40 60 80 100 Tamb – Ambient Temperature ( °C ) 95 10904 0.6 0.4 0.2 0 0.2 0.4 0.6 95 10319 Figure 1 Power Dissipation vs. Ambient Temperature Figure 4 Rel. Luminous Intensity vs. Angular Displacement 100 60 High Efficiency Red IF – Forward Current ( mA ) IF – Forward Current ( mA ) 50 40 30 20 10 1 10 0.1 0 0 20 40 60 80 100 Tamb – Ambient Temperature ( °C ) 95 10905 0 tp/T=0.005 1000 0.01 0.02 0.2 0.5 DC 10 1 0.01 95 9985 4 5 2.0 v60°C 0.05 100 3 Figure 5 Forward Current vs. Forward Voltage Iv rel – Relative Luminous Intensity IF – Forward Current ( mA ) Tamb 2 VF – Forward Voltage ( V ) 95 9989 Figure 2 Forward Current vs. Ambient Temperature 10000 1 0.1 High Efficiency Red 1.6 1.2 0.8 0.4 0 0.1 1 10 100 tp – Pulse Length ( ms ) Figure 3 Forward Current vs. Pulse Length www.vishay.de • FaxBack +1-408-970-5600 4 (12) 0 95 9993 20 40 60 80 100 Tamb – Ambient Temperature ( °C ) Figure 6 Rel. Luminous Intensity vs. Ambient Temperature Document Number 83032 Rev. A1, 04-Feb-99 TLM.310. Vishay Telefunken 100 Iv rel – Relative Luminous Intensity 2.4 High Efficiency Red Soft Orange IF – Forward Current ( mA ) 2.0 1.6 1.2 0.8 10 1 0.4 0.1 0 10 1 95 10321 20 50 0.5 0.2 100 0.1 200 0.05 500 IF(mA) 0.02 tp/T Figure 7 Rel. Lumin. Intensity vs. Forw. Current/Duty Cycle 0 2 3 4 5 VF – Forward Voltage ( V ) Figure 10 Forward Current vs. Forward Voltage 10 2.0 Iv rel – Relative Luminous Intensity Iv rel – Relative Luminous Intensity 1 95 9990 High Efficiency Red 1 0.1 0.01 Soft Orange 1.6 1.2 0.8 0.4 0 1 100 10 IF – Forward Current ( mA ) 95 9995 0 95 9994 Figure 8 Relative Luminous Intensity vs. Forward Current 20 40 60 80 100 Tamb – Ambient Temperature ( °C ) Figure 11 Rel. Luminous Intensity vs. Ambient Temperature Iv rel – Relative Luminous Intensity 1.2 High Efficiency Red 1.0 0.8 0.6 0.4 0.2 0 590 95 10040 610 630 650 670 690 l – Wavelength ( nm ) Figure 9 Relative Luminous Intensity vs. Wavelength Document Number 83032 Rev. A1, 04-Feb-99 www.vishay.de • FaxBack +1-408-970-5600 5 (12) TLM.310. Vishay Telefunken 100 Iv rel – Relative Luminous Intensity 2.4 Soft Orange Yellow IF – Forward Current ( mA ) 2.0 1.6 1.2 0.8 10 1 0.4 0.1 0 10 1 95 10259 20 50 0.5 0.2 100 0.1 200 0.05 500 IF(mA) 0.02 tp/T 0 4 5 2.0 Iv rel – Relative Luminous Intensity Iv rel – Relative Luminous Intensity 3 Figure 15 Rel. Luminous Intensity vs. Ambient Temperature 10 Soft Orange 1 0.1 Yellow 1.6 1.2 0.8 0.4 0.01 0 1 100 10 IF – Forward Current ( mA ) 95 9997 0 40 60 80 100 Figure 16 Rel. Luminous Intensity vs. Ambient Temperature 2.4 Iv rel – Relative Luminous Intensity 1.2 Soft Orange 1.0 0.8 0.6 0.4 0.2 0 570 20 Tamb – Ambient Temperature ( °C ) 95 9992 Figure 13 Relative Luminous Intensity vs. Forward Current Iv rel – Relative Luminous Intensity 2 VF – Forward Voltage ( V ) Figure 12 Rel. Lumin. Intensity vs. Forw. Current/Duty Cycle 95 10324 1 95 9987 Yellow 2.0 1.6 1.2 0.8 0.4 0 590 610 630 650 670 l – Wavelength ( nm ) Figure 14 Relative Luminous Intensity vs. Wavelength www.vishay.de • FaxBack +1-408-970-5600 6 (12) 95 10260 10 20 50 1 0.5 0.2 100 0.1 200 500 IF(mA) 0.05 0.02 tp/T Figure 17 Rel. Lumin. Intensity vs. Forw. Current/Duty Cycle Document Number 83032 Rev. A1, 04-Feb-99 TLM.310. Vishay Telefunken 2.0 Iv rel – Relative Luminous Intensity Iv rel – Relative Luminous Intensity 10 Yellow 1 0.1 Green 1.6 1.2 0.8 0.4 0 0.01 1 100 10 IF – Forward Current ( mA ) 95 9999 0 Figure 18 Relative Luminous Intensity vs. Forward Current 40 60 80 100 Figure 21 Rel. Luminous Intensity vs. Ambient Temperature 1.2 Iv rel – Relative Luminous Intensity 20 Tamb – Ambient Temperature ( °C ) 95 10320 2.4 Iv rel– Specific Luminous Intensity Yellow 1.0 0.8 0.6 0.4 0.2 0 550 Green 2.0 1.6 1.2 0.8 0.4 0 570 590 610 630 650 l – Wavelength ( nm ) 95 10039 10 95 10263 Figure 19 Relative Luminous Intensity vs. Wavelength 20 50 100 200 500 IF – Forward Current ( mA ) Figure 22 Specific Luminous Intensity vs. Forward Current 100 IF – Forward Current ( mA ) Green 10 1 0.1 0 95 9986 1 2 3 4 5 VF – Forward Voltage ( V ) Figure 20 Forward Current vs. Forward Voltage Document Number 83032 Rev. A1, 04-Feb-99 www.vishay.de • FaxBack +1-408-970-5600 7 (12) TLM.310. Vishay Telefunken 2.0 Iv rel – Relative Luminous Intensity Iv rel – Relative Luminous Intensity 10 Green 1 0.1 Pure Green 1.6 1.2 0.8 0.4 0 0.01 1 100 10 IF – Forward Current ( mA ) 95 9996 0 Figure 23 Relative Luminous Intensity vs. Forward Current 40 60 80 100 Figure 26 Rel. Luminous Intensity vs. Ambient Temperature 1.2 Iv rel – Relative Luminous Intensity 20 Tamb – Ambient Temperature ( °C ) 95 9991 2.4 Iv rel– Specific Luminous Intensity Green 1.0 0.8 0.6 0.4 0.2 0 520 Pure Green 2.0 1.6 1.2 0.8 0.4 0 540 560 580 600 620 l – Wavelength ( nm ) 95 10038 10 95 10261 Figure 24 Relative Luminous Intensity vs. Wavelength 100 20 50 100 200 500 IF – Forward Current ( mA ) Figure 27 Specific Luminous Intensity vs. Forward Current IF – Forward Current ( mA ) Pure Green 10 1 0.1 0 95 9988 1 2 3 4 5 VF – Forward Voltage ( V ) Figure 25 Forward Current vs. Forward Voltage www.vishay.de • FaxBack +1-408-970-5600 8 (12) Document Number 83032 Rev. A1, 04-Feb-99 TLM.310. Vishay Telefunken Iv rel – Relative Luminous Intensity 10 Pure Green 1 0.1 0.01 1 100 10 IF – Forward Current ( mA ) 95 9998 Figure 28 Relative Luminous Intensity vs. Forward Current Iv rel – Relative Luminous Intensity 1.2 1.0 Pure Green 0.8 0.6 0.4 0.2 0 500 95 10325 520 540 560 580 600 l – Wavelength ( nm ) Figure 29 Relative Luminous Intensity vs. Wavelength Document Number 83032 Rev. A1, 04-Feb-99 www.vishay.de • FaxBack +1-408-970-5600 9 (12) TLM.310. Vishay Telefunken Dimensions in mm 95 11314 www.vishay.de • FaxBack +1-408-970-5600 10 (12) Document Number 83032 Rev. A1, 04-Feb-99 TLM.310. Vishay Telefunken PCB Layout in mm 95 10966 Document Number 83032 Rev. A1, 04-Feb-99 www.vishay.de • FaxBack +1-408-970-5600 11 (12) TLM.310. Vishay Telefunken Ozone Depleting Substances Policy Statement It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operating systems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances ( ODSs ). The Montreal Protocol ( 1987 ) and its London Amendments ( 1990 ) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively 2 . Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency ( EPA ) in the USA 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C ( transitional substances ) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay-Telefunken products for any unintended or unauthorized application, the buyer shall indemnify Vishay-Telefunken against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany Telephone: 49 ( 0 ) 7131 67 2831, Fax number: 49 ( 0 ) 7131 67 2423 www.vishay.de • FaxBack +1-408-970-5600 12 (12) Document Number 83032 Rev. A1, 04-Feb-99