SKYWORKS SKY77707

PRODUCT SUMMARY
SKY77707 Power Amplifier Module for LTE / EUTRAN
Bands XII / XVII (698–716 MHz)
Applications
Description
• Long-Term Evolution (LTE)
The SKY77707 Power Amplifier Module (PAM) is a fully matched, surface mount module developed for
LTE / EUTRAN applications. This small and efficient module packs full coverage of LTE Bands XII / XVII
into a single compact package. The SKY77707 meets the stringent spectral linearity requirements of
LTE modulation with QPSK / 16QAM modulations from 1.4 MHz to 20 MHz bandwidth and full or
partial resource block allocations with high power added efficiency.
• Evolved Universal
Terrestrial Radio Access
Networks (EUTRAN)
• Handsets and Data Cards
Features
• QPSK, 16QAM modulations
• 1.4 MHz to 20 MHz
bandwidth
• Up to 100 resource blocks
• Bands XII / XVII linear power
@ 3.4 V
- LTE 28 dBm
• Low voltage positive bias
supply 3.2 V to 4.2 V
The single Gallium Arsenide (GaAs) Microwave Monolithic Integrated Circuit (MMIC) contains all active
circuitry in the module, including the PA, input, and interstage matching. Output match is realized offchip within the module package to optimize efficiency and power performance into a 50 Ω load. The
SKY77707 is manufactured with Skyworks’ BiFET process which provides for all positive voltage DC
supply operation while maintaining high efficiency and good linearity. Primary bias is supplied via the
VCC1 and VCC2 pads directly from battery output in the 3.2 to 4.2 volt range. Power-down is
accomplished by setting a logic low level on the VEN pad. No external supply side switch is needed as
typical “off” leakage is a few microamperes with full primary voltage supplied from the battery. The
VMODE0 and VMODE1 pads are used to switch between high, medium and low power modes to
reduce current consumption and gain in the back-off conditions.
• Excellent linearity and
efficiency
• Large dynamic range
• Small, low profile package
- 3 mm x 3 mm x 0.9 mm
- 10-pad configuration
• InGaP BiFET Technology
Figure 1. SKY77707 Functional Block Diagram
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
201227A • Skyworks Proprietary and Confidential Information. • Products and product information are subject to change without notice. • January 25, 2010
1
Copyright © 2010, Skyworks Solutions, Inc. All Rights Reserved.
Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by
Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the
information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to
update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes.
No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or
information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of
Sale.
THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A
PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY
DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS
SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION,
LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury,
death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any
damages resulting from such improper use or sale.
Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of
products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for
applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters.
Skyworks, the Skyworks symbol, “Breakthrough Simplicity,” DCR, Helios, HIP3, Innovation to Go, Intera, iPAC, LIPA, Polar Loop, and System Smart are trademarks or registered trademarks of
Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional
information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference.