MA-COM SMA11

A11 / SMA11
Cascadable Amplifier
5 to 1000 MHz
Rev. V2
Features
Product Image
• LOW NOISE: 3.1 dB (TYP.)
• LOW VSWR: 1.3:1 (TYP.)
• FLAT BANDWIDTH: <±0.25 dB (TYP.)
Description
The A11 RF amplifier is a discrete hybrid design, which uses
thin film manufacturing processes for accurate performance and
high reliability.
This single stage bipolar transistor feedback amplifier design
displays impressive performance over a broadband frequency
range. Both TO-8 and Surface Mount packages are
Hermetically sealed, and MIL-STD-883 environmental screening
is available.
Ordering Information
Part Number
Package
A11
TO-8
MAAM-008715-0SMA11
Surface Mount
MAAM-008715-00CA11
SMA Connectorized **
** The connectorized version is not RoHs compliant.
Electrical Specifications: Z0 = 50Ω, VCC = +15 VDC
Typical
Parameter
Frequency
Absolute Maximum Ratings
Guaranteed
Parameter
Absolute
Maximum
Units
MHz
25ºC
0º to 50ºC
-54º to +85ºC*
Storage Temperature
-62ºC to +125ºC
1-1100
5-1000
5-1000
Case Temperature
+125ºC
DC Voltage
+20 V
Continuous Input Power
+13 dBm
Short Term Input power
(1 minute max.)
50 mW
Small Signal Gain (min)
dB
14.7
14.0
13.5
Gain Flatness (max)
dB
±0.3
±1.0
±1.2
Reverse Isolation
dB
20
Noise Figure (max)
dB
3.1
3.5
4.0
Peak Power (3 µsec max.)
0.5 W
Power Output
@ 1 dB comp. (min)
dBm
-2.0
-3.0
-4.0
“S” Series Burn-In
Temperature (case)
+125ºC
IP3
dBm
+10
IP2
dBm
+10
Parameter
Rating
Second Order Harmonic IP
dBm
+15
Thermal Resistance θjc
45ºC/W
VSWR Input / Output (max)
DC Current @ 15 Volts (max)
mA
Thermal Data: VCC = +15 VDC
1.3:1 / 1.3:1
1.8:1 / 1.8:1
2.0:1 / 2.0:1
Transistor Power Dissipation Pd
0.048 W
9
11
12
Junction Temperature Rise
Above Case Tjc
+2ºC
* Over temperature performance limits for part number CA11, guaranteed from 0oC to +50oC only.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
A11 / SMA11
Cascadable Amplifier
5 to 1000 MHz
Rev. V2
Outline Drawing: TO-8 *
Typical Performance Curves at +25°C
WEIGHT: 1 gram (0.04 oz.) max
Outline Drawing: TO-8 *
WEIGHT: 1 gram (0.04 oz.) max
Outline Drawing: TO-8 *
WEIGHT: 19 grams (0.67 oz.) max
∗
Dimensions are inches (millimeters) ±0.015 (0.38) unless otherwise specified.
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.