2087-6001-00 Point Contact Detector 10 MHz to 18 GHz Rev. V5 Features • • • • Specifications Broadband Frequency Ranges No Bias Required Flat Frequency Response Passivated Stainless Steel Finish Parameter Specification Flatness (Maximum) ± 0.75 dB, 10 MHz to 4 GHz ± 1.25 dB, 4 MHz to 8 GHz ± 1.5 dB, 10 MHz to 12 GHz ± 2.5 dB, 10 MHz to 18 GHz VSWR (Typical) 1.7:1, 10 MHz to 4 GHz 2.7:1, 10 MHz to 8 GHz 3.5:1, 10 MHz to 12 GHz 4.0:1, 10 MHz to 18 GHz Maximum Power 100 mW Mechanical Outline Drawing Negative 4 Output Polarity 6 k Ohms Typical 2 Video Resistance Temperature Range Detector Part Number 2087-6001-00 1. 2. 3. 4. -65°C to +100°C Frequency Range 1 (GHz) Open Circuit Voltage Sensitivity 2 (mV/mW) Min. Tangential Sensitivity 3 (-dBm) Min. Output Capacitance (pF) Typical Dimension A Inches mm 10 MHz to 4 GHz 400 45 12 1.55 39.4 10 MHz to 8 GHz 500 45 12 1.55 39.4 10 MHz to 12 GHz 700 45 12 1.55 39.4 10 MHz to 18 GHz 800 45 12 1.55 39.4 Usable to 20 GHz For RF power levels below –20 dBm, and with an open circuit load. With video amplifier of 1 MHz bandwidth and 2 dB noise figure. For Positive Output change suffix to -13. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.