16CTQ...GS/16CTQ...G-1 Vishay High Power Products Schottky Rectifier, 2 x 8 A FEATURES 16CTQ...G-1 16CTQ...GS • 175 °C TJ operation • Center tap configuration • Low forward voltage drop • High frequency operation Base common cathode 2 Base common cathode 2 • High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance • Guard ring for enhanced ruggedness and long term reliability • Designed and qualified for industrial level 2 1 Common 3 Anode cathode Anode 2 1 Common 3 Anode cathode Anode D2PAK TO-262 DESCRIPTION This center tap Schottky rectifier series has been optimized for low reverse leakage at high temperature. The proprietary barrier technology allows for reliable operation up to 175 °C junction temperature. Typical applications are in switching power supplies, converters, freewheeling diodes, and reverse battery protection. PRODUCT SUMMARY IF(AV) 2x8A VR 60/100 V MAJOR RATINGS AND CHARACTERISTICS SYMBOL IF(AV) CHARACTERISTICS VALUES Rectangular waveform VRRM UNITS 16 A 60/100 V IFSM tp = 5 µs sine 650 A VF 8 Apk, TJ = 125 °C (per leg) 0.58 V TJ Range - 55 to 175 °C VOLTAGE RATINGS PARAMETER SYMBOL Maximum DC reverse voltage VR Maximum working peak reverse voltage VRWM 16CTQ060GS 16CTQ060G-1 16CTQ080GS 16CTQ080G-1 16CTQ100GS 16CTQ100G-1 UNITS 60 80 100 V ABSOLUTE MAXIMUM RATINGS PARAMETER Maximum average forward current See fig. 5 SYMBOL TEST CONDITIONS VALUES UNITS 8 per leg IF(AV) 50 % duty cycle at TC = 148 °C, rectangular waveform per device A 16 Following any rated load condition and with rated VRRM applied Maximum peak one cycle non-repetitive surge current per leg See fig. 7 IFSM Non-repetitive avalanche energy per leg EAS TJ = 25 °C, IAS = 0.50 A, L = 60 mH 7.50 mJ Repetitive avalanche current per leg IAR Current decaying linearly to zero in 1 µs Frequency limited by TJ maximum VA = 1.5 x VR typical 0.50 A Document Number: 93243 Revision: 22-Aug-08 5 µs sine or 3 µs rect. pulse 10 ms sine or 6 ms rect. pulse For technical questions, contact: [email protected] 650 A 210 www.vishay.com 1 16CTQ...GS/16CTQ...G-1 Vishay High Power Products Schottky Rectifier, 2 x 8 A ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL TEST CONDITIONS 8A Maximum forward voltage drop per leg See fig. 1 VFM (1) TJ = 25 °C 16 A 8A TJ = 125 °C 16 A Maximum reverse leakage current per leg See fig. 2 IRM (1) Threshold voltage VF(TO) Forward slope resistance rt TJ = 25 °C VR = Rated VR TJ = 125 °C TJ = TJ maximum VALUES UNITS 0.72 0.88 0.58 V 0.69 0.28 7.0 mA 0.415 V 11.07 mΩ Maximum junction capacitance per leg CT VR = 5 VDC (test signal range 100 kHz to 1 MHz) 25 °C 500 pF Typical series inductance per leg LS Measured lead to lead 5 mm from package body 8.0 nH 10 000 V/µs VALUES UNITS - 55 to 175 °C Maximum voltage rate of change Note (1) Pulse width < 300 µs, duty cycle < 2 % dV/dt Rated VR THERMAL - MECHANICAL SPECIFICATIONS PARAMETER SYMBOL TEST CONDITIONS Maximum junction and storage temperature range TJ, TStg Maximum thermal resistance, junction to case per leg RthJC DC operation See fig. 4 3.25 Typical thermal resistance, case to heatsink RthCS Mounting surface, smooth and greased 0.50 2 g 0.07 oz. minimum 6 (5) kgf · cm maximum 12 (10) (lbf · in) Approximate weight Mounting torque °C/W 16CTQ060GS Case style D2PAK 16CTQ080GS 16CTQ100GS Marking device 16CTQ060G-1 Case style TO-262 16CTQ080G-1 16CTQ100G-1 www.vishay.com 2 For technical questions, contact: [email protected] Document Number: 93243 Revision: 22-Aug-08 16CTQ...GS/16CTQ...G-1 Schottky Rectifier, 2 x 8 A Vishay High Power Products 100 IR - Reverse Current (mA) IF - Instantaneous Forward Current (A) 1000 100 TJ = 175 °C TJ = 125 °C TJ = 25 °C 10 TJ = 175 °C 10 TJ = 150 °C 1 TJ = 125 °C 0.1 TJ = 100 °C TJ = 75 °C 0.01 TJ = 50 °C 0.001 TJ = 25 °C 1 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 0.0001 0 20 VFM - Forward Voltage Drop (V) 40 60 80 100 VR - Reverse Voltage (V) Fig. 1 - Maximum Forward Voltage Drop Characteristics (Per Leg) Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage (Per Leg) CT - Junction Capacitance (pF) 1000 TJ = 25 °C 100 0 20 40 60 80 100 VR - Reverse Voltage (V) ZthJC - Thermal Impedance (°C/W) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage (Per Leg) 10 1 D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 0.1 Single pulse (thermal resistance) 0.01 0.00001 0.0001 0.001 0.01 0.1 1 10 t1 - Rectangular Pulse Duration (s) Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics (Per Leg) Document Number: 93243 Revision: 22-Aug-08 For technical questions, contact: [email protected] www.vishay.com 3 16CTQ...GS/16CTQ...G-1 Vishay High Power Products Schottky Rectifier, 2 x 8 A 7 170 DC 160 150 140 Square wave (D = 0.50) 80 % rated VR applied 130 120 D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 6 Average Power Loss (W) Allowable Case Temperature (°C) 180 5 4 RMS limit 3 2 DC 1 110 See note (1) 0 100 0 2 4 6 8 10 12 14 0 4 6 8 10 12 IF(AV) - Average Forward Current (A) IF(AV) - Average Forward Current (A) Fig. 5 - Maximum Allowable Case Temperature vs. Average Forward Current (Per Leg) IFSM - Non-Repetitive Surge Current (A) 2 Fig. 6 - Forward Power Loss Characteristics (Per Leg) 1000 At any rated load condition and with rated VRRM applied following surge 100 100 10 1000 10 000 tp - Square Wave Pulse Duration (µs) Fig. 7 - Maximum Non-Repetitive Surge Current (Per Leg) L D.U.T. IRFP460 Rg = 25 Ω Current monitor High-speed switch Freewheel diode + Vd = 25 V 40HFL40S02 Fig. 8 - Unclamped Inductive Test Circuit Note Formula used: TC = TJ - (Pd + PdREV) x RthJC; Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6); PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = 10 V (1) www.vishay.com 4 For technical questions, contact: [email protected] Document Number: 93243 Revision: 22-Aug-08 16CTQ...GS/16CTQ...G-1 Schottky Rectifier, 2 x 8 A Vishay High Power Products ORDERING INFORMATION TABLE Device code 16 C T Q 100 G S TRL - 1 2 3 4 5 6 7 8 9 1 - Current rating (16 = 16 A) 2 - C = Common cathode 3 - T = TO-220, TO-262, D2PAK 4 - Q = Schottky “Q” series 060 = 60 V 5 - Voltage ratings 080 = 80 V 6 - G = Schottky generation 100 = 100 V 7 - None = TO-220 -1 = TO-262 S = D2PAK 8 - None = Tube (50 pieces) TRL = Tape and reel (left oriented - for D2PAK only) TRR = Tape and reel (right oriented - for D2PAK only) 9 - None = Standard production PbF = Lead (Pb)-free (for D2PAK tube and TO-262) P = Lead (Pb)-free (for D2PAK TRL and TRR) LINKS TO RELATED DOCUMENTS Dimensions http://www.vishay.com/doc?95014 Part marking information http://www.vishay.com/doc?95008 Packaging information http://www.vishay.com/doc?95032 SPICE model http://www.vishay.com/doc?95279 Document Number: 93243 Revision: 22-Aug-08 For technical questions, contact: [email protected] www.vishay.com 5 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1