15ETL06SPbF/15ETL06-1PbF Vishay High Power Products Ultralow VF Hyperfast Rectifier for Discontinuous Mode PFC, 15 A FRED PtTM FEATURES 15ETL06-1PbF 15ETL06SPbF • Benchmark ultralow forward voltage drop Available • Hyperfast recovery time RoHS* • Low leakage current COMPLIANT • 175 °C operating junction temperature • Lead (Pb)-free (“PbF” suffix) Base cathode 2 • Designed and qualified for Q101 level 2 DESCRIPTION 1 N/C 3 1 3 Anode N/C D2PAK State of the art, ultralow VF, soft-switching hyperfast rectifiers optimized for Discontinuous (Critical) Mode (DCM) Power Factor Correction (PFC). The minimized conduction loss, optimized stored charge and low recovery current minimize the switching losses and reduce over dissipation in the switching element and snubbers. The device is also intended for use as a freewheeling diode in power supplies and other power switching applications. Anode TO-262 PRODUCT SUMMARY VF (typical) 0.99 V IF(AV) 15 A VR 600 V APPLICATIONS AC-DC SMPS 70 W to 400 W e.g. laptop and printer AC adaptors, desktop PC, TV and monitor, games units and DVD AC-DC power supplies. ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL TEST CONDITIONS MAX. UNITS 600 V Peak repetitive reverse voltage VRRM Average rectified forward current IF(AV) TC = 154 °C 15 Non-repetitive peak surge current IFSM TJ = 25 °C 250 Peak repetitive forward current IFM 30 TJ, TStg - 65 to 175 Operating junction and storage temperatures A °C ELECTRICAL SPECIFICATIONS (TJ = 25 °C unless otherwise specified) PARAMETER Breakdown voltage, blocking voltage Forward voltage SYMBOL VBR, VR VF TEST CONDITIONS MIN. TYP. MAX. 600 - - IF = 15 A - 0.99 1.05 IR = 100 µA IF = 15 A, TJ = 150 °C - 0.85 0.92 VR = VR rated - 0.1 10 TJ = 150 °C, VR = VR rated - 15 120 UNITS V µA Reverse leakage current IR Junction capacitance CT VR = 600 V - 20 - pF Series inductance LS Measured lead to lead 5 mm from package body - 8.0 - nH * Pb containing terminations are not RoHS compliant, exemptions may apply Document Number: 94005 Revision: 21-May-08 For technical questions, contact: [email protected] www.vishay.com 1 15ETL06SPbF/15ETL06-1PbF Vishay High Power Products Ultralow VF Hyperfast Rectifier for Discontinuous Mode PFC, 15 A FRED PtTM DYNAMIC RECOVERY CHARACTERISTICS (TC = 25 °C unless otherwise specified) PARAMETER Reverse recovery time SYMBOL TEST CONDITIONS MIN. Reverse recovery charge MAX. UNITS IF = 1 A, dIF/dt = 100 A/µs, VR = 30 V - 60 120 IF = 15 A, dIF/dt = 100 A/µs, VR = 30 V - 190 270 TJ = 25 °C - 220 - - 320 - - 19 - - 26 - TJ = 25 °C - 2.2 - TJ = 125 °C - 4.3 - MIN. TYP. MAX. UNITS TJ, TStg - 65 - 175 °C RthJC - 1.0 1.3 trr TJ = 125 °C Peak recovery current TYP. IRRM Qrr TJ = 25 °C TJ = 125 °C IF = 15 A dIF/dt = 200 A/µs VR = 390 V ns A µC THERMAL - MECHANICAL SPECIFICATIONS PARAMETER Maximum junction and storage temperature range Thermal resistance, junction to case per leg SYMBOL TEST CONDITIONS Thermal resistance, junction to ambient per leg RthJA (1) Typical socket mount - - 70 Thermal resistance, case to heatsink RthCS (2) Mounting surface, flat, smooth and greased - 0.5 - - 2.0 - g - 0.07 - oz. 6.0 (5.0) - 12 (10) kgf · cm (lbf · in) Weight Mounting torque Marking device www.vishay.com 2 °C/W Case style D2PAK 15ETL06S Case style TO-262 15ETL06-1 For technical questions, contact: [email protected] Document Number: 94005 Revision: 21-May-08 15ETL06SPbF/15ETL06-1PbF Ultralow VF Hyperfast Rectifier for Discontinuous Mode PFC, 15 A FRED PtTM 100 IR - Reverse Current (µA) IF - Instantaneous Forward Current (A) 100 Vishay High Power Products TJ = 175 °C TJ = 150 °C TJ = 25 °C 10 1 0.4 TJ = 175 °C 10 TJ = 150 °C TJ = 125 °C 1 TJ = 100 °C TJ = 75 °C 0.1 TJ = 50 °C 0.01 TJ = 25 °C 0.001 0.6 0.8 1.0 1.2 1.4 1.6 0 100 200 300 400 500 600 VF - Forward Voltage Drop (V) VR - Reverse Voltage (V) Fig. 1 - Typical Forward Voltage Drop Characteristics Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage CT - Junction Capacitance (pF) 100 TJ = 25 °C 10 0 100 200 300 400 500 600 VR - Reverse Voltage (V) ZthJC - Thermal Impedance (°C/W) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage 10 1 PDM D = 0.50 D = 0.20 D = 0.10 D = 0.05 D = 0.02 D = 0.01 0.1 Single pulse (thermal resistance) 0.01 0.00001 0.0001 0.001 t1 t2 Notes: 1. Duty factor D = t1/t2 . 2. Peak TJ = PDM x ZthJC + TC 0.01 0.1 1 . 10 t1 - Rectangular Pulse Duration (s) Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics Document Number: 94005 Revision: 21-May-08 For technical questions, contact: [email protected] www.vishay.com 3 15ETL06SPbF/15ETL06-1PbF Ultralow VF Hyperfast Rectifier for Discontinuous Mode PFC, 15 A FRED PtTM 180 500 170 400 DC 160 150 Square wave (D = 0.50) 80 % rated VR applied 140 300 200 100 See note (1) 130 0 5 10 15 20 VR = 390 V TJ = 125 °C TJ = 25 °C 0 100 25 1000 IF(AV) - Average Forward Current (A) dIF/dt (A/µs) Fig. 5 - Maximum Allowable Case Temperature vs. Average Forward Current Fig. 7 - Typical Reverse Recovery Time vs. dIF/dt 9000 25 8000 RMS Limit 20 IF = 30 A IF = 15 A 7000 6000 15 Qrr (nC) Average Power Loss (W) IF = 30 A IF = 15 A trr (ns) Allowable Case Temperature (°C) Vishay High Power Products D = 0.01 D = 0.02 D = 0.05 D = 0.10 D = 0.20 D = 0.50 10 5 DC 5000 4000 3000 2000 VR = 390 V TJ = 125 °C TJ = 25 °C 1000 0 0 5 10 15 20 25 0 100 1000 IF(AV) - Average Forward Current (A) Fig. 6 - Forward Power Loss Characteristics dIF/dt (A/µs) Fig. 8 - Typical Stored Charge vs. dIF/dt Note Formula used: TC = TJ - (Pd + PdREV) x RthJC; Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6); PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = Rated VR (1) www.vishay.com 4 For technical questions, contact: [email protected] Document Number: 94005 Revision: 21-May-08 15ETL06SPbF/15ETL06-1PbF Ultralow VF Hyperfast Rectifier for Discontinuous Mode PFC, 15 A FRED PtTM Vishay High Power Products VR = 200 V 0.01 Ω L = 70 µH D.U.T. dIF/dt adjust D IRFP250 G S Fig. 9 - Reverse Recovery Parameter Test Circuit (3) trr IF ta tb 0 Qrr (2) IRRM (4) 0.5 IRRM dI(rec)M/dt (5) 0.75 IRRM (1) dIF/dt (1) dIF/dt - rate of change of current through zero crossing (2) IRRM - peak reverse recovery current (3) trr - reverse recovery time measured from zero crossing point of negative going IF to point where a line passing through 0.75 IRRM and 0.50 IRRM extrapolated to zero current. (4) Qrr - area under curve defined by trr and IRRM Qrr = trr x IRRM 2 (5) dI(rec)M/dt - peak rate of change of current during tb portion of trr Fig. 10 - Reverse Recovery Waveform and Definitions Document Number: 94005 Revision: 21-May-08 For technical questions, contact: [email protected] www.vishay.com 5 15ETL06SPbF/15ETL06-1PbF Ultralow VF Hyperfast Rectifier for Discontinuous Mode PFC, 15 A FRED PtTM Vishay High Power Products ORDERING INFORMATION TABLE Device code 15 E T L 06 S 1 2 3 4 5 6 1 - 2 - E = Single diode 3 - T = TO-220, D 2PAK 4 - L = Ultralow VF hyperfast recovery 5 - Voltage rating (06 = 600 V) 6 - TRL PbF 7 8 Current rating (15 A) S = D2PAK -1 = TO-262 7 - None = Tube (50 pieces) TRL = Tape and reel (left oriented, for D 2PAK package) TRR = Tape and reel (right oriented, for D 2PAK package) 8 - None = Standard production PbF = Lead (Pb)-free LINKS TO RELATED DOCUMENTS Dimensions http://www.vishay.com/doc?95014 Part marking information http://www.vishay.com/doc?95008 Packaging information http://www.vishay.com/doc?95032 SPICE model http://www.vishay.com/doc?95270 www.vishay.com 6 For technical questions, contact: [email protected] Document Number: 94005 Revision: 21-May-08 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1