ROHM 2SD1766

Medium power transistor (32V, 2A)
2SD1766 / 2SD1758 / 2SD1862
Dimensions (Unit : mm)
2SD1758
1.0±0.2
(2)
(3)
0.1
0.4 +
−0.05
0.5±0.1
0.4±0.1
1.5±0.1
0.9
2.3±0.2
3.0±0.2
Abbreviated symbol : DB∗
ROHM : MPT3
EIAJ : SC-62
0.65±0.1
0.75
2.3+0.2
−0.1
0.5±0.1
9.5±0.5
(1)
0.4±0.1
1.5±0.1
C0.5
0.9
5.5+0.3
−0.1
2.5 +0.2
−0.1
Structure
Epitaxial planar type NPN silicon transistor
6.5±0.2
5.1+0.2
−0.1
1.5
0.2
1.5 +
−0.1
1.6±0.1
1.5±0.3
0.5±0.1
0.2
4.5+
−0.1
2.5
2SD1766
4.0±0.3
Features
1) Low VCE(sat).
VCE(sat) = 0.5V (Typ.)
(IC/IB = 2A / 0.2A)
2) Complements the 2SB1188 / 2SB1182 / 2SB1240
2.3±0.2
0.55±0.1
1.0±0.2
(1) (2) (3)
(1) Base
(2) Collector
(3) Emitter
ROHM : CPT3
EIAJ : SC-63
(1) Base
(2) Collector
(3) Emitter
2SD1862
2.5±0.2
0.65Max.
0.5±0.1
(1)
(2)
4.4±0.2
14.5±0.5
1.0
0.9
6.8±0.2
(3)
2.54 2.54
1.05
ROHM : ATV
0.45±0.1
(1) Emitter
(2) Collector
(3) Base
∗ Denotes hFE
Absolute maximum ratings (Ta=25C)
Parameter
Symbol
Limits
Unit
Collector-base voltage
VCBO
40
V
Collector-emitter voltage
VCEO
32
V
Emitter-base voltage
VEBO
5
V
2
A (DC)
Collector current
Collector
power
dissipation
IC
0.5
2SD1766
2SD1758
2.5 ∗1
PC
2 ∗2
10
1 ∗3
2SD1862
A (Pulse)
W
W (TC=25°C)
W
Junction temperature
Tj
150
°C
Storage temperature
Tstg
−55~+150
°C
∗1 Single pulse, PW=20ms
∗2 When mounted on a 40×40×0.7 mm ceramic board.
∗3 Printed circuit board: 1.7 mm thick, collector copper plating 1 cm2 or lager.
www.rohm.com
c 2009 ROHM Co., Ltd. All rights reserved.
○
1/3
2009.12 - Rev.B
2SD1766 / 2SD1758 / 2SD1862
Data Sheet
Electrical characteristics (Ta=25C)
Symbol
Min.
Typ.
Max.
Unit
Collector-base breakdown voltage
Parameter
BVCBO
40
−
−
V
IC=50μA
Collector-emitter breakdown voltage
BVCEO
32
−
−
V
IC=1mA
Emitter-base breakdown voltage
BVEBO
5
−
−
V
IE=50μA
Collector cutoff current
ICBO
−
−
1
μA
VCB=20V
Emitter cutoff current
IEBO
−
−
1
μA
VEB=4V
DC current transfer ratio
hFE
120
−
390
−
VCE=3V, IC=0.5A
∗
VCE(sat)
−
0.5
0.8
V
IC/IB=2A / 0.2A
∗
Transition frequency
fT
−
100
−
MHz
VCE=5V, IE=−50mA, f=100MHz
∗
Output capacitance
Cob
−
30
−
pF
Collector-emitter saturation voltage
Conditions
VCB=10V, IE=0A, f=1MHz
∗ Measured using pulse current.
Packaging specifications and hFE
Package
Taping
Code
T100
TL
TV2
Basic ordering
unit (pieces)
1000
2500
2500
−
−
Type
hFE
2SD1766
QR
2SD1758
QR
−
2SD1862
QR
−
−
−
hFE values are classified as follows :
Item
Q
R
hFE
120 to 270
180 to 390
 Electrical characteristic curves
500
200
100
50
20
10
5
Ta=25°C
2.7mA
500
2.4mA
0.4
2.1mA
1.8mA
0.3
1.5mA
1.2mA
0.2
0.9mA
0.6mA
0.1
200
VCE=3V
1V
100
50
0.3mA
2
0
Fig.1 Grounded emitter propagation
characteristics
500
200
100
IC/IB=50
50
20
5
10
10 20
50 100 200 500 1A 2A
COLLECTOR CURRENT : IC (mA)
Fig.4 Collector-emitter saturation
voltage vs. collector current
www.rohm.com
c 2009 ROHM Co., Ltd. All rights reserved.
○
0.8
1.2
1.6
20
2.0
5
2
10 20
50 100 200
Fig.3 DC current gain vs. collector
current
1000
Ta=25°C
1
IC/IB=10
0.5
0.2
0.1
5
10 20
50 100 200
500 1A 2A
COLLECTOR CURRENT : IC (mA)
Fig.5 Collector-emitter saturation
voltage vs. collector current
2/3
500 1A 2A
COLLECTOR CURRENT : IC (mA)
Fig.2 Grounded emitter output
characteristics
BASE SATURATION VOLTAGE : VBE(sat) (V)
Ta=25°C
0.4
COLLECTOR TO EMITTER VOLTAGE : VCE (V)
BASE TO EMITTER VOLTAGE : VBE (V)
20
IB=0A
0
0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0
TRANSITION FREQUENCY : fT (MHz)
1
0
COLLECTOR SATURATION VOLTAGE : VCE(sat) (mV)
Ta=25°C
3.0mA
DC CURRENT GAIN : hFE
1000
COLLECTOR CURRENT : IC (A)
COLLECTOR CURRENT : IC (mA)
0.5
Ta=25°C
VCE=3V
2000
Ta=25°C
VCE=5V
500
200
100
50
20
−1
−2
−5 −10 −20
−50 −100−200 −500 −1A
EMITTER CURRENT : IE (mA)
Fig.6 Transition frequency vs. emitter
current
2009.12 - Rev.B
Data Sheet
Cib
200
100
Cob
50
20
0.5
1
2
5
10
20
COLLECTOR TO BASE VOLTAGE : VCB (V)
EMITTER TO BASE VOLTAGE
: VEB (V)
Fig.7 Collector output capacitance vs.
collector-base voltage
Emitter input capacitance vs.
emitter-base voltage
COLLECTOR CURRENT : IC (A)
Ta=25°C
f=1MHz
IE=0A
IC=0A
500
10
5
5
1000
COLLECTOR CURRENT : IC (A)
COLLECTOR OUTPUT CAPACITANCE : Cob (pF)
EMITTER INPUT CAPACITANCE
: Cib (pF)
2SD1766 / 2SD1758 / 2SD1862
2
1
0.5
0.2
PW=10ms∗
100ms∗
DC
0.1
0.05 Ta=25°C
∗Single
0.02 nonrepetitive
pulse
0.01
0.1 0.2
0.5 1
2
5
10
20
50
COLLECTOR TO EMITTER VOLTAGE : VCE (V)
Fig.8 Safe operating area
(2SD1766)
2
1
PW=100ms∗
0.5
0.2
0.1
0.05
TC=25°C
∗Single
0.02 nonrepetitive
pulse
0.01
0.1 0.2
0.5 1
2
5
10
20
50
COLLECTOR TO EMITTER VOLTAGE : VCE (V)
Fig.9 Safe operating area
(2SD1758)
3
Ic Max
Ic Max Pulse
0.5
DC
COLLECTOR CURRENT : IC (A)
1
s
0m
=1
s
PW
m
00
=1
PW
2
0.2
0.1
0.05 Ta=25°C
Single
nonrepetitive
pulse
0.2 0.5
1
2
5
10
20
50
COLLECTOR TO EMITTER VOLTAGE : VCE (V)
Fig.10 Safe operating area
(2SD1862)
www.rohm.com
c 2009 ROHM Co., Ltd. All rights reserved.
○
3/3
2009.12 - Rev.B
Notice
Notes
No copying or reproduction of this document, in part or in whole, is permitted without the
consent of ROHM Co.,Ltd.
The content specified herein is subject to change for improvement without notice.
The content specified herein is for the purpose of introducing ROHM's products (hereinafter
"Products"). If you wish to use any such Product, please be sure to refer to the specifications,
which can be obtained from ROHM upon request.
Examples of application circuits, circuit constants and any other information contained herein
illustrate the standard usage and operations of the Products. The peripheral conditions must
be taken into account when designing circuits for mass production.
Great care was taken in ensuring the accuracy of the information specified in this document.
However, should you incur any damage arising from any inaccuracy or misprint of such
information, ROHM shall bear no responsibility for such damage.
The technical information specified herein is intended only to show the typical functions of and
examples of application circuits for the Products. ROHM does not grant you, explicitly or
implicitly, any license to use or exercise intellectual property or other rights held by ROHM and
other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the
use of such technical information.
The Products specified in this document are intended to be used with general-use electronic
equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices).
The Products specified in this document are not designed to be radiation tolerant.
While ROHM always makes efforts to enhance the quality and reliability of its Products, a
Product may fail or malfunction for a variety of reasons.
Please be sure to implement in your equipment using the Products safety measures to guard
against the possibility of physical injury, fire or any other damage caused in the event of the
failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM
shall bear no responsibility whatsoever for your use of any Product outside of the prescribed
scope or not in accordance with the instruction manual.
The Products are not designed or manufactured to be used with any equipment, device or
system which requires an extremely high level of reliability the failure or malfunction of which
may result in a direct threat to human life or create a risk of human injury (such as a medical
instrument, transportation equipment, aerospace machinery, nuclear-reactor controller,
fuel-controller or other safety device). ROHM shall bear no responsibility in any way for use of
any of the Products for the above special purposes. If a Product is intended to be used for any
such special purpose, please contact a ROHM sales representative before purchasing.
If you intend to export or ship overseas any Product or technology specified herein that may
be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to
obtain a license or permit under the Law.
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact us.
ROHM Customer Support System
http://www.rohm.com/contact/
www.rohm.com
© 2009 ROHM Co., Ltd. All rights reserved.
R0039A