Negative Output Plastic Detector, 840 - 2200 MHz DT65-0006 V 1.00 Features SO-14 n High Output Sensitivity n Small, SMT, Plastic SO-14 Package n Single Design to Cover Cellular, PCS and UMTS Bands n Single Ended or Differential Output Description M/A-COM’s DT65-0006 is a plastic detector in an SMT plastic package. The DT65-0006 usable input power range is from Tss to +20 dBm. Square law response is from Tss to approximately –15 dBm, linear range is between –15 dBm and approximately +6 dBm with saturation through +20 dBm and burnout occurring beyond +23 dBm. This bias schottky detector offers generally high sensitivity (K). The RF power handling of these detectors make them particularly useful in signal processing and power monitoring for telecommunication equipment. An internal reference diode is provided for use as a differential detector. Electrical Specifications: TA = 25°C, VCC = +5.0V, Load Resistance = 30K Ohms Parameter Test Conditions Frequency Units Min. Typ. Max. Voltage Sensitivity (K) RF IN = -20 dBm 840-2200 MHz mV/mW 1800 2080 — In-Band Flatness RF IN = 0 dBm 840-2200 MHz dB — — 0.50 Tss RF IN = 0 dBm 1.5 GHz dBm — -47 -45 RF Bypass Capacitance 840-2200 MHz pF — 10 — Video Resistance 840-2200 MHz Ohms — 300 — Negative Output Plastic Detector, 840 - 2200 MHz DT65-0006 V 1.00 Recommended PCB Layout Functional Diagram +5V DET Out RF IN REF P.C.B. LAYOUT CIRCUIT MATERIAL FR-4 .028 THICK ∅.014 PLATED THRU HOLES ALL RF PORTS ARE 50 OHMS Voltage Sensitivity (K) Typ. (mV/mW)1 Pin Configuration Input Power -40°C +25°C +85°C Pin # Function Pin # -20 dBm 2415 2080 1805 -15 dBm 1900 1670 1510 -10 dBm 1310 1190 -5 dBm 815 0 dBm 500 +5 dBm +10 dBm Function 1 GND 8 GND 2 RF IN 9 REF Out 1140 3 GND 10 VCC 790 760 4 GND 11 GND 490 475 5 N/C 12 N/C 300 290 280 6 N/C 13 DET Out 170 175 165 7 GND 14 GND 1. VCC = +5V, Load Resistance = 30K Ohms. Absolute Maximum Ratings 2 Ordering Information Parameter Absolute Maximum Part Number Package Max Input Power +23 dBm DT65-0006 Bulk Packaging Applied Voltage (VCC) +10V DT65-0006TR Tape and Reel (1K Reel) Operating Temperature -40°C to +85°C DT65-0006-TB Units Mounted on Test Board Storage Temperature -65°C to +125°C 2. Operation of this device above any one of these parameters may cause permanent damage. Specifications subject to change without notice. n North America: Tel. (800) 366-2266 n Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298 n Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020 Visit www.macom.com for additional data sheets and product information. 2