MAPDCT0010 2 Way 0º Reverse Path Power Divider 5 to 100 MHz M/A-COM Products Released, Rev. V3 Schematic with off-chip components Features • • • • • Surface mount 2 Way 0 degree. 260°C reflow compatible RoHS* compliant Available on tape and reel. Description M/A Com’s MAPDCT0010 is a 2 way 0 degree reverse path power divider in a low cost, surface mount package. Ideally suited for high volume CATV & VSAT applications. Two 0603 1pF capacitors and one 160Ω resistor are required with this part. Pin 1 ID Mark Case style: SM-150 Pin configuration Pin no. Function 1 Output 2 2 External 1pF Capacitor to ground 3 Ground 4 Input 5 External 1pF Capacitor to ground 6 Output 1 Unless otherwise stated dimensions are in inches [mm] Tolerance: .xx ± .02, .xxx ± .010 Note: Pin’s 2 and 5 need to be connected together on the PCB as shown above. Ordering information Part number Description MAPDCT0010TR Reel quantity 1000 * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. Note: Reference Application Note M513 for reel size information. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAPDCT0010 2 Way 0º Reverse Path Power Divider 5 to 100 MHz M/A-COM Products Released, Rev. V3 Electrical specifications: TA = 25°C, Z0 = 75Ω Parameter Frequency Units Min Typ Max Insertion Loss 5 - 100 MHz dB - 0.3 0.6 Amplitude Unbalance 5 - 20 MHz 20 - 100 MHz dB dB - ±0.25 ±0.15 ±0.40 ±0.25 Phase Unbalance 5 - 20 MHz 20 - 100 MHz º º - ±2.5 ±0.5 ±6.0 ±2.0 Isolation 5 - 100 MHz dB 28 32 - Input Return Loss 5 - 20 MHz 20 - 100 MHz dB dB 16 22 22 27 - Output Return Loss 1 (pin6) 5 - 20 MHz 20 - 100 MHz dB dB 16 25 22 29 - Output Return Loss 2 (pin1) 5 - 20 MHz 20 - 100 MHz dB dB 13 22 16 27 - Absolute maximum ratings¹ ² Parameter Absolute maximum Max input power 1W Internal Load Dissipation 0.125W Operating temperature -40°C to +80°C Storage temperature -40°C to +85°C 1. Exceeding any one or combination of these limits may cause permanent damage to this device. 2. M/A-COM does not recommend sustained operation near these survivability limits. 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAPDCT0010 2 Way 0º Reverse Path Power Divider 5 to 100 MHz M/A-COM Products Released, Rev. V3 Typical performance curves: TA = 25°C, Z0 = 75Ω Insertion loss 1: pin 4 to pin 6 (ref value -3dB) Insertion loss 2: pin 4 to pin 1(ref value -3dB) -3.0 -3.2 -3.2 -3.4 -3.4 dB dB -3.0 -3.6 -3.6 -3.8 -3.8 -4.0 -4.0 5 24 43 62 81 5 100 24 43 62 81 100 Frequency (MHz) Frequency (MHz) Phase balance Amplitude balance 1.0 5.0 0.8 3.0 0.6 D eg rees dB 0.4 0.2 0.0 -0.2 -0.4 1.0 -1.0 -3.0 -0.6 -0.8 -5.0 -1.0 5 24 43 62 81 5 100 24 62 81 100 81 100 Frequency (MHz) Frequency (MHz) Isolation Return loss: Input 0 0 -5 -5 -10 -10 -15 -15 dB dB 43 -20 -20 -25 -25 -30 -30 -35 -35 -40 -40 5 24 43 62 Frequency (MHz) 81 100 5 24 43 62 Frequency (MHz) 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.