A181/SMA181 10 TO 1000 MHz CASCADABLE AMPLIFIER · HIGH REVERSE ISOLATION: 22 dB (TYP.) · HIGH OUTPUT POWER: +22 dBm (TYP.) · HIGH THIRD ORDER I.P.: +35 dBm (TYP.) Typical Performance @ 25°C Specifications (Rev. Date: 11/00)* Characteristics Typical Frequency Small Signal Gain (min.) Gain Flatness (max.) Reverse Isolation Noise Figure (max.) Power Output @ 1 dB comp. (min.) IP3 IP2 Second Order Harmonic IP VSWR Input / Output (max.) DC Current @ 15 Volts (max.) 5-400 MHz 16.5 dB ±0.3 dB 22 dB 3.8 dB 22.0 dBm +35 dBm +48 dBm +54 dBm 1.4:1 / 1.4:1 95 mA Guaranteed 0°° to 50°°C -54°° to +85°°C 0.0-1.0 GHz 15.5 dB ±0.7 dB 0.0-1.0 GHz 14.5 dB ±0.8 dB 4.5 dB 20.0 dBm 5.0 dB 19.5 dBm 1.9:1 / 1.9:1 104 mA 2.1:1 / 2.1:1 113 mA * Measured in a 50-ohm system at +15 Vdc Nominal. Subject to change without notice. Absolute Maximum Ratings Storage Temperature Max. Case Temperature Max. DC Voltage Max. Continuous RF Input Power Max. Short Term RF Input Power (1 minute max.) Max. Peak Power (3 µsec max.) “S” Series Burn-in Temperature (Case) -62° to +125°C 85°C +17 Volts +15 dBm 100 mW 0.5 W 85°C Thermal Data: Vcc = 15 Vdc Thermal Resistance θjc Transistor Power Dissipation Pd Junction Temperature Rise Above Case Tjc 148°C/W 0.622 W 92°C Outline Drawings Package Figure Model TO-8 BG A181 Surface Mount AA SMA181 SMA Connectorized CE CA181 Specifications subject to change without notice. • North America: 1-800-366-2266 Visit www.macom.com for complete contact and product information.