Series 75 Metal-Core Conduit 712-188 Environmental User-Installable Bulkhead Fitting for Series 75 Flexible Metal-Core Conduit 712-188 M 20 A D C FLATS D Product Series D = Flat for D Hole Mounting (Omit for none) Basic No. Conduit Type Material/Finish (Table III) Dash No. (Table I and II) FLAT FOR 'D' HOLE MOUNTING (SEE P/N DEVELOPMENT) G E CONE LENGTH .19 (4.8) REF O-RING CONDUIT F I.D. DIA B MTG HOLE A THREAD .120 (3.0) MAX PANEL © 2003 Glenair, Inc. CAGE Codes 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] C-16 Series 75 Metal-Core Conduit 712-188 Environmental User-Installable Bulkhead Fitting for Series 75 Flexible Metal-Core Conduit TABLE I DASH NO. 08 12 16 20 24 32 40 48 56 64 80 96 DASH NO. 08 12 16 20 24 32 40 48 56 64 80 96 CONDUIT I.D. .250 (6.4) .375 (9.5) .500 (12.7) .625 (15.9) .750 (19.1) 1.000 (25.4) 1.250 (31.8) 1.500 (38.1) 1.750 (44.5) 2.000 (50.8) 2.500 (63.5) 3.000 (76.2) .75 .75 .75 .75 .75 1.00 1.00 1.00 1.00 1.00 1.00 1.00 A THREAD CLASS 2A 1/2 - 20 UNF 5/8 - 24 UNEF 3/4 - 20 UNEF 7/8 - 20 UNEF 1 - 20 UNEF 1 5/16 - 18 UNEF 1 1/2 - 18 UNEF 1 3/4 - 18 UNS 2 - 18 UNS 2 1/4 - 16 UN 2 3/4 - 16 UN 3 1/4 - 16 UN TABLE II F MAX E (NOTE 2) (19.1) 1.16 (29.5) (19.1) 1.34 (34.0) (19.1) 1.46 (37.1) (19.1) 1.65 (41.9) (19.1) 1.84 (46.7) (25.4) 2.02 (51.3) (25.4) 2.34 (59.4) (25.4) 2.72 (69.0) (25.4) 2.96 (75.2) (25.4) 3.22 (81.8) (25.4) 3.86 (98.0) (25.4) 4.38(111.3) 1.39 1.39 1.39 1.39 1.39 1.64 1.64 1.64 1.64 1.64 1.64 1.64 B DIA +.030 (0.8) -.000 (0.0) .50 (12.7) .63 (16.0) .75 (19.1) .88 (22.4) 1.00 (25.4) 1.32 (33.5) 1.50 (38.1) 1.75 (44.5) 2.00 (50.8) 2.25 (57.2) 2.75 (69.9) 3.25 (82.6) G (35.3) (35.3) (35.3) (35.3) (35.3) (41.7) (41.7) (41.7) (41.7) (41.7) (41.7) (41.7) C FLATS .750 (19.1) .875 (22.2) 1.000 (25.4) 1.125 (28.6) 1.250 (31.8) 1.562 (39.7) 1.812 (46.0) 2.062 (52.4) 2.312 (58.7) 2.562 (65.1) 3.062 (77.8) 3.562 (90.5) D DIA +000 (0.0) -.015 (0.4) .438 (11.1) .563 (14.3) .688 (17.5) .812 (20.6) .938 (23.8) 1.250 (31.8) 1.438 (36.5) 1.688 (42.9) 1.938 (49.2) 2.188 (55.6) 2.688 (68.3) 3.188 (81.0) NOTES: 1. Metric dimensions (mm), are in parentheses. 2. F dimensions are based on type A construction. Add .125 (3.2) to listed dimensions for each additional shield types B through D. TABLE III SYMBOL MATERIAL FINISH Aluminum Alloy, 6061-T6 per QQ-A-225/8 Brass, ASTM B16 per QQ-B-626 Cadmium, Olive Drab, per QQ-P-416, over Electroless Nickel per ASTM B733-90, and MIL-C-26074, 500 Hour Salt Spray C Corrosion Resistant Steel per QQ-S-763, 300 Series Passivate per QQ-P-35 M Aluminum Alloy, 6061-T6 per QQ-A-225/8 Electroless Nickel per ASTM B733-90 and MIL-C-26074 NC Aluminum Alloy, 6061-T6 per QQ-A-225/8 Zinc Cobalt, Olive Drab Carbon Steel, B1113, per QQ-S-637 Cadmium, Olive Drab per QQ-P-416, over Electroless Nickel per ASTM B733-90 and MIL-C-26074, 500 Hour Salt Spray A B S © 2003 Glenair, Inc. CAGE Codes 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] C-17