BAT240... High Voltage Schottky Diode • Rectifier Schottky diode for telecommunication and industrial applications • High reverse voltage: 240 V • For power supply applications • For clamping and protection in high voltage applications • Pb-free (RoHS compliant) package 1) • Qualified according AEC Q101 BAT240A ! , , ESD (Electrostatic discharge) sensitive device, observe handling precaution! Type Package Configuration Marking BAT240A SOT23 half bridge 4Ms Maximum Ratings at TA = 25°C, unless otherwise specified Parameter Symbol Value Unit Diode reverse voltage2) VR 240 V Forward current 2) IF 400 mA Non-repetitive peak surge forward current I FSM 1 Ptot 400 mW Junction temperature Tj 150 °C Operating temperature range T op -55 ... 125 Storage temperature T stg -55 ... 150 A (t ≤ 10ms) Total power dissipation TS ≤ 28°C 1Pb-containing 2For package may be available upon special request TA > 25 °C the derating of VR and IF has to be considered. Please refer to the attached curves. 1 2007-10-04 BAT240... Thermal Resistance Parameter Symbol Value Unit Junction - soldering point 1) RthJS ≤ 305 K/W Electrical Characteristics at TA = 25°C, unless otherwise specified Parameter Symbol Values Unit min. typ. max. DC Characteristics 240 V Breakdown voltage V(BR) I(BR) = 500 µA Reverse current IR µA VR = 100 V - 1 10 VR = 200 V - 5 - Forward voltage V VF IF = 10 mA 0.25 0.325 0.36 IF = 20 mA 0.29 0.37 0.41 IF = 50 mA 0.35 0.47 0.52 IF = 100 mA - 0.58 - IF = 200 mA - 0.72 - IF = 400 mA - 0.9 - AC Characteristics Diode capacitance pF CT VR = 10 V, f = 1 MHz - 11 15 VR = 5 V, f = 1 MHz - 15 20 1For calculation of RthJA please refer to Application Note Thermal Resistance 2 2007-10-04 BAT240... Diode capacitance CT = ƒ (VR) Reverse current IR = ƒ (TA) f = 1MHz VR = Parameter 10 2 10 -2 A 200 V 150 V 100 V 50 V 10 -3 IR CT pF 10 -4 10 1 10 -5 10 -6 10 0 0 20 40 60 80 100 120 140 160 V 10 -7 20 200 40 60 80 100 °C VR 130 TA Forward Voltage VF = ƒ (TA) Forward current IF = ƒ (VF) IF = Parameter TA = Parameter 10 -1 0.55 V A 0.45 0.4 IF VF 10 -2 50mA 0.35 0.3 80°C 65°C 45°C 25°C -40°C 10 -3 20mA 0.25 0.2 10mA 0.15 -50 -25 0 25 50 75 100 °C 10 -4 0 150 TA 0.1 0.2 0.3 0.4 V 0.6 VF 3 2007-10-04 BAT240... Permissible Reverse voltage VR = ƒ (TA) Forward current IF = ƒ (T S) tp = Parameter, Duty cycle < 0.01 Device mounted on PCB with Rth = 160 k/W 450 300 mA V DC 100ms 300µs 300 200 IF V Rmax 350 250 150 200 150 100 100 50 50 0 0 20 40 60 80 120 °C 100 0 0 150 15 30 45 60 90 105 120 °C 75 TA 150 TS Permissible Puls Load R thJS = ƒ (tp) Permissible Pulse Load IFmax / I FDC = ƒ (t p) 10 3 10 3 K/W IFmax/IFDC - RthJS 10 2 D=0 0.005 0.01 0.02 0.05 0.1 0.2 0.5 10 2 10 1 0.5 0.2 0.1 0.05 0.02 0.01 0.005 D=0 10 0 10 -1 -6 10 10 -5 10 -4 10 -3 10 -2 s 10 1 10 10 0 -6 10 0 tp 10 -5 10 -4 10 -3 10 -2 s 10 0 tp 4 2007-10-04 BAT240... Application example BAT240A Energy efficient bridge rectification for 110 V / 60 Hz power lines 3 3 D2 D2 ~ ~ 1 DC output D1 D1 1 2 2 + AC input 5 2007-10-04 Package SOT23 BAT240... 0.4 +0.1 -0.05 1) 2 0.08...0.1 C 0.95 1.3 ±0.1 1 2.4 ±0.15 3 0.1 MAX. 10˚ MAX. B 1 ±0.1 10˚ MAX. 2.9 ±0.1 0.15 MIN. Package Outline A 5 0...8˚ 1.9 0.2 0.25 M B C M A 1) Lead width can be 0.6 max. in dambar area Foot Print 0.8 0.9 1.3 0.9 0.8 1.2 Marking Layout (Example) Manufacturer EH s 2005, June Date code (YM) Pin 1 BCW66 Type code Standard Packing Reel ø180 mm = 3.000 Pieces/Reel Reel ø330 mm = 10.000 Pieces/Reel 4 0.2 8 2.13 2.65 0.9 Pin 1 1.15 3.15 6 2007-10-04 BAT240... Edition 2006-02-01 Published by Infineon Technologies AG 81726 München, Germany © Infineon Technologies AG 2007. All Rights Reserved. Attention please! The information given in this dokument shall in no event be regarded as a guarantee of conditions or characteristics (“Beschaffenheitsgarantie”). With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office (www.infineon.com). Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. 7 2007-10-04