BO LYMIN BP320240D Feature 1. FSTN LCD, TAB IC and PCB package 2. LCD driver only(Recommending SED1335 Controller) 3. +3V ~ +5V single power supply, with built-in positive voltage for LCD driving 4. 1/240 duty cycle 5. Option: EL B/L & EL inverter 6. Option: Touch panel & touch panel controller Mechanical Data Item Standard Value Module Dimension 85.0 x 98.2 Viewing Area 62.0 x 81.8 Dot Size 0.225 x 0.225 Dot Pitch 0.24 x 0.24 Pin Assignment Pin 1~4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20~21 22~24 Symbol DB0-3 /Dispoff FLM M LP CP Unit mm mm mm mm Function Data bus L:display off Start line signal Alternate signal Data latch clock Data shift clock Power supply (+3V ~ +5V) Power supply (GND) H:EL on Contrast adjustment Reset signal Serial clock/touch panel left signal (X axis) Data output/touch panel right signal (X axis) Data input/touch panel upper signal (Y axis) Chip select/touch panel lower signal (Y axis) Interrupt signal for Touch Panl controller Vdd Vss EL-on Vadj /RST SK*/X1** D0*/X2** D1*/Y1** CS*/Y2** INT EL1- EL2 Power supply for EL B/L (for external EL inverter) NC Dimension (Options : Frame without ears) Electronic Characteristics Symbol Condition Typical Unit Value Input Voltage Vdd Vdd = +5.0V 5.0 V Supply Current Idd Vdd = +5.0V 15 mA LCD Driving Vlcd Vadj-Vss V 0.5 Voltage Item Built-in EL Inverter Supply Current Iel Vel = +3.3V 55 mA