ExStik® II DO/pH/Conductivity Kit User friendly kit economically measures 6 parameters Including Dissolved Oxygen, pH, Conductivity, TDS, Salinity, and Temperature Features: • Convenient DO/pH/Conductivity Kit with all the accessories and carrying case for easy travel • Designed for water, wastewater, groundwater, aquaculture and fisheries professionals Kit includes: • EC500 pH/Conductivity ExStik® II meter with combination high accuracy multi-ranging Conductivity sensor for Conductivity, TDS, Salinity, pH and Temperature measurements • DO600 Dissolved Oxygen ExStik® II meter with electrode, replacement membrane cap, and electrolyte • Meters waterproof to IP57 standard Accessories included: • Sample pH buffers Single use pouches for pH4, pH7, pH10, and rinse solutions • Weighted base with 2 cups and caps, four 3V CR-2032 batteries and neckstrap with each meter, and carrying case Patents Pending Specifications TDS/Salinity pH DO (saturation mode) DO (concentration mode) Temperature (pH, Conductivity) Temperature (DO) DO (concentration mode) Automatic Temp Compensation Max Resolution Basic Accuracy Dimensions Weight Range 0 to 99.9ppm (mg/L), 100 to 999ppm (mg/L) 1.0 to 9.99ppt (g/L) 0.00 to 14.00pH 0 to 200.0% 0 to 20.00ppm (mg/L) 23 to 194°F (-5 to 90°C) 32 to 122°F (0 to 50°C) 0 to 20.00ppm (mg/L) Yes DO600: 0.1%, 0.01ppm (mg/L) EC500: 0.1µS, 0.01ppm (mg/L) DO600: ±2.0%FS, 0.4ppm (mg/L) ±1.8°F/1°C EC500: ±2.0%FS, 0.01pH), ±1.8°F/1°C 9.5 x 6.8 x 2.8” (241 x 173 x 71mm) 1.56 lbs. (708g) Ordering Information: DO610 ............ExStik® II DO/pH/Conductivity Kit EX010 ............Extension Cable, 3ft (1 Meter) with probe weight for ExStik EX050 ............Extension Cable, 16ft (5 Meters) with probe weight for ExStik www.extech.com Specifications subject to change without notice. 6//08 - R1 Copyright © 2007 Extech Instruments Corporation. All rights reserved including the right of reproduction in whole or in part in any form.