MA4EX580L-1225 Low Cost Silicon Double Balanced HMIC™ HMIC ™ Mixer 4.7 - 6.0 GHz Features • • • • • • SOT-25 Outline 7.6 dB Typical Conversion Loss +3 to +7 dBm LO Drive HMIC™ IC Process Silicon Low Barrier Schottky Diode DC – 1050 MHz IF Bandwidth Low Cost Miniature Plastic Package 3 2 1 Description M/A-COM’s MA4EX580L-1225 is a silicon monolithic 4.7 to 6.0 GHz double balanced mixer in a low cost miniature surface mount SOT-25 package. The die uses M/A-COM’s unique HMIC silicon/glass process to achieve low loss passive elements while retaining the advantages of low barrier silicon Schottky barrier diodes. Applications These mixers are well suited for high volume wireless and cellular applications where small size and repeatability are required. Typical applications include frequency conversion, modulation and demodulation in wireless receivers and 4 5 Pin Configuration PIN 1 2 3 Function RF GND LO PIN 4 5 — Function GND IF — Ordering Information Model No. MA4EX580L-1225T Package Tape and Reel Electrical Specifications @ +25°C= Parameter Conversion Loss L - R Isolation L - I Isolation R - I Isolation LO VSWR RF VSWR IF VSWR Input IP3 Input 1 dB Compression IF 1 dB Bandwidth Frequency Rage 4700 MHz 4.7 - 6.0 GHz 4700 MHz 4.7 - 6.0 GHz 4700 MHz 4.7 - 6.0 GHz 4700 MHz 4.7 - 6.0 GHz 4700 MHz 4.7 - 6.0 GHz 4700 MHz 4.7 - 6.0 GHz DC - 1050 MHz 4700 MHz 4.7 - 6.0 GHz 4700 MHz 4.7 - 6.0 GHz DC - 1050 MHz Specifications subject to change without notice. North America: Tel. (800) 366-2266, Fax (800) 618-8883 Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298 Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020 Visit www.macom.com for additional data sheets and product information. Test Conditions LO Drive = +3+7 dBm RF = -10 dBm, IF = 60 MHz LO Drive = +5 dBm RF Level = - 10 dBm LO Drive = +5 dBm RF Level = - 10 dBm LO Drive = +5 dBm RF Level = - 10 dBm LO Drive = +5 dBm RF Level = - 10 dBm LO Drive = +5 dBm RF Level = - 10 dBm LO Drive = +5 dBm IF Level = - 10 dBm LO Drive = +3+7 dBm RF = -10 dBm, IF = 60 MHz LO Drive = +3+7 dBm RF = -10 dBm, IF = 60 MHz LO = 4650 MHz @+5dBm Units Typ. Max. dB 7.6 8.5 23.0 20.0 22.0 20.0 9.4 7.5 2.7 2.8 2.3 3.1 1.1 8.0 9.5 dB dB dB dBm dBm MHz 7.5 8.1 +1.6 +1.5 V 3.0 Low Cost Silicon Double Balanced HMIC™ Mixer, 4.7 - 6.0 GHz MA4EX580L-1225 Typical Performance Curves = IP3 and 1 dB Compression Conversion Loss -5 -5 .5 10 9 8 7 6 5 4 3 2 1 0 T y p ic a l + 3 d B m -7 -7 .5 -8 T y p ic a l + 7 d B m -8 .5 -9 -9 .5 -1 0 4700 4900 5100 5300 5500 5700 IP3 IP3 (dBm) RELATIVE POWER (dB) -6 -6 .5 5900 6100 6300 1 dB Compression 4.70 6500 4.80 4.90 5.00 5.10 5.20 5.30 5.40 5.50 5.60 5.70 5.80 5.90 6.00 FREQUENCY (GHz) F R E Q U E N C Y (M H z ) VSWR Isolations 0 3 .5 -5 LO 3 -1 5 VSWR RATIO RELATIVE POWER (dB) R -I IS O L A T IO N L - I IS O L A T IO N -1 0 -2 0 -2 5 RF 2 .5 2 L -R IS O L A T IO N -3 0 1 .5 IF -3 5 4700 4800 4900 5000 5100 5200 5300 5400 5500 5600 5700 5800 5900 6000 F R E Q U E N C Y (M H z ) Absolute Maximum Rating1 Parameter Operating Temperature Storage Temperature Incident LO Power Incident RF Power Mounting Temperature 1 4700 4800 4900 5000 5100 5200 5300 5400 5500 5600 5700 5800 5900 6000 F R E Q U E N C Y (M H z Schematic Maximum Ratings -65°C to +125°C -65°C to +150°C +20 dBm +20 dBm +235°C for 10 seconds IF PIN 5 RF LO PIN 1 PIN 3 1. Exceeding these limits may cause permanent damage. Case Style SOT-251 SOT-25 5 X E TYP. H C D B G A J Specifications subject to change without notice. North America: Tel. (800) 366-2266, Fax (800) 618-8883 Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298 Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020 Visit www.macom.com for additional data sheets and product information. DIM A B C D E F G H J INCHES MIN MAX 0.1103 0.1181 0.1023 0.1181 0.0355 0.0512 0.0591 0.0669 0.0374 Typ. 0.0138 0.0197 0.0031 0.0079 0.0020 0.0059 0.0138 0.0216 MILLIMETERS MIN MAX 2.8 3.10 2.6 3.00 0.9 1.30 1.5 1.7 0.95 Typ. 0.35 0.5 0.08 0.20 0.05 0.15 0.35 0.55 1. Lead Coplanarity should be 0.003 (0.08) max. V 3.0