MAAM-007865-0P1R00 Broadband Driver Amplifier 50 to 2000 MHz Rev. V2 Features Product Image • High Gain: 20 dB (TYP.) • Flat Broadband Gain Response: +/- 1.3 dB (TYP) • P1dB: +18.0 dBm (TYP.) • Flexibility for Multi-Band Systems • On-Chip Active Bias Network • Lead Free 3 mm PQFN Surface Mount Package • 260oC Reflow Capability Functional Block Diagram Applications • LO Buffer Amplifier • Driver Stage for Power Amplifiers • Basestation / Repeater Applications • Broadband RF Gain Block Description M/A-COM’s MAAM-007865-0P1R00 amplifier utilizes GaAs HBT technology with an +18 Volt BVceo process for improved linearity performance, power efficiency, and high reliability, in a low cost 3 mm PQFN surface mount plastic package. The MAAM-007865-0P1R00 incorporates an on-chip active bias network for ease of implementation, and maintains high linearity over temperature. The device operates from a single +5 volt supply and has a +5 volt reference pin for power down control capability. An external dropping resistor can be added to lower the P1dB level by 4 dB. The MAAM-007865-0P1R00 requires a minimal number of external bias components to achieve a flat gain response across the entire 50 to 2000 MHz frequency band. Ordering Information 1 Pin Configuration Pin No. Function 1 No Connection No connection 2 3 RF Input RF Input RF Input Signal RF Input Signal Description 4 No Connection or GND No Connection. GND preferred 5 No Connection or GND No Connection. GND preferred 6 No Connection or GND No Connection. GND preferred 7 RF Output / VCC RF Output & VCC Supply Input 8 RF Output / VCC RF Output & VCC Supply Input 9 No Connection 10 VCCB 11 No Connection Part Number Package MAAM-007865-0P1R00 3 mm 12 lead PQFN MAAM-007865-0P1RA1 Sample Application Kit 12 VCONT MAAM-007865-0P1RTR 1000 Piece Tape & Reel Pkg Base GND No Connection VCC Supply to Bias Circuit. Connected to VCONT on PCB. Optionally could be connected to VCC instead of VCONT. Normally not connected or Open. Must not be connected to GND. DC Control Input to PA. External resistor required for normal operation @ +5 V. See Application Circuit. RF/DC GND and thermal Path to PCB Vias. Sufficient Vias must be provided for thermal considerations. See PCB Layout 1. Reference Application Note M513 for reel size information. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAAM-007865-0P1R00 Broadband Driver Amplifier 50 to 2000 MHz Rev. V2 o Electrical Specifications1: Tc= +25 C, VCONT= 5 V, VCC = 5 V, Z0 = 50 Ω, CW Parameter Test Conditions Units Min Frequency Range MHz 50 Gain dB 20 dB +/-1.3 1.6 Gain Flatness o o Typ Max 2000 Gain Variation Over Temp = - 40 C to +85 C dB Input Return Loss Over Frequency dB -10 Output Return Loss Over Frequency dB -10 Reverse Isolation Output P-1dB Output IP3 dB -28 50 to 1000 MHz dBm 18.5 1000 to 2000 MHz dBm 17 Pout = - 1dBm / tone, ∆f = 1MHz dBm 29.5 dB 5 V 5 5 Noise Figure Bias Supply Control Voltage Bias Current VCC VCONT Amp ON V VCONT Amp OFF V 6 2 Quiescent Current Iccq mA 42 47 Control current Icont mA 9 12 C/W TBD Thermal Resistance θjc Junction Temperature Rise Above Case Tjc 1. All data is based on the Evaluation Circuit Board (page 5). 2. Caution: Operation beyond Absolute Maximum Ratings can degrade performance or cause permanent damage. Operating the MAAM-007865-0P1R00 The MAAM-007865-0P1R00 can be damaged by electrostatic discharge (ESD). Use proper ESD control techniques when handling this device. To operate the MAAM-007865-0P1R00, follow these steps: 1.) Connect the 50 ohm load 2.) Apply VCC (+5.0 Vdc) 3.) Apply VCONT (+5.0 Vdc) 4.) Set the Input Power Level (Pin) 5.) Turn off in reverse order o o C TBD Absolute Maximum Ratings2 Parameter Absolute Maximum RF Input Power + 3 dBm Supply Voltage VCC +6V Control Voltage VCONT + 5.5 V VCC Supply Current 55 mA Operating Temperature -40 C to + 85 C Storage Temperature -65 C to +150 C Device Junction Temperature TJ, max 150 C o o o o o 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAAM-007865-0P1R00 Broadband Driver Amplifier 50 to 2000 MHz Rev. V2 Typical Performance Curves at +25°C (VCONT = +5V, 12mA, VCC = +5 V, 41 mA) Gain vs Frequency Isolation vs Frequency -25 22 20 Isolation (dB) Isolation (dB) Gain G ain(dB) (dB) 24 + 25 C + 85 C - 40 C 18 16 0 0.5 1 1.5 -27 -29 -31 2 0 0.5 Frequency (GHz) -5 -10 -15 + 25 C + 85 C - 40 C -25 0 0.5 1 1.5 0 -10 -15 -20 0 2 0.5 Noise Figure (dB) Noise Figure (dB) P1dB (dBm) 20 18 + 25 C + 85 C - 40 C 14 1 1.5 2 1.5 2 Noise Figure vs Frequency 22 0.5 1 Frequency (GHz) Output P-1dB vs Frequency 0 2 + 25 C + 85 C - 40 C -5 Frequency (GHz) 16 1.5 Output Return Loss vs Frequency Return Loss (dB) Output Return Loss (dB) LossLoss (dB) (dB) InputReturn Return Input Return Loss vs Frequency -20 1 Frequency (GHz) 1.5 2 Frequency (GHz) 8 6 4 2 0 0.5 1 Frequency (GHz) Output IP3 (dBm) Output IP3 (dBm) Output IP3 vs Frequency 33 31 29 27 0 0.5 1 1.5 2 Frequency (GHz) 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAAM-007865-0P1R00 Broadband Driver Amplifier 50 to 2000 MHz Rev. V2 Application Circuit Schematic APPLICATION CIRCUIT SCHEMATIC Vcont Vcont = + 5 V ( ON) Vcont = < 2 V ( OFF) Icont = 9mA nom. C3 C=100 pF R1 R=100 Ohm VCC 10 VCCB 11 NC/GND 6 RFIN2 NC/GND 3 3mm QFN 12-L PKG 5 RFIN1 NC 12 VCONT 2 NC/GND RFIN NC C4 C=0.1 uF R2 R=0 Ohm 4 C1 C=0.01 uF 1 VCC= +5V , nom., 6V, max. Iccq= 40 mA, nom. C5 C=1000 pF L1 L=200 nH NC 9 RFO2 8 RFO1 7 C2 C=0.01 uF RFOUT Evaluation Circuit Board Bill of Material COMPONENT PART NO VALUE SUGGESTED VENDOR C1,C2 X7R0603HTTD103K 0.01uF KOA C3 NPO0402HTTP101J 100pF KOA C4 X7R0603CTTD104K 0.1uF KOA C5 X7R0603HTTD102K 1000pF KOA L1 0603CS-R20XJBU 200nH COILCRAFT R1 RK73B1ETTP101J(0402) 100 OHM KOA R2 RK73Z1ELTP(0402) 000 OHM KOA J1, J2 142-0701-881 RF CONN JOHNSON J3 TSM-105-01-S-DV DC CONN U1 MAAM-007865-0P1R00 3mm PQFN 12L TYCO PCB 1000028554-1 GETEK,28mil TYCO 4 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAAM-007865-0P1R00 Broadband Driver Amplifier 50 to 2000 MHz Rev. V2 EVALUATION CIRCUIT BOARD LAYOUT1,2,3 GND MAAM-007865-001 VCC VCONT RFIN EVAL PCB1 4/06 RFOUT 1. GETEK, 2-layer, Total Board Thickness = 32 mil. Microstrip 50 Ohm Line width = 54 mil Board Size: 1.4 x 1.1 inches. 2. Via Geometry shown must be used for the 3 mm PQFN package backside to provide a low-inductance & low thermal resistance path to the PCB backside ground. At least 9 vias are required. Via Diameter = 8 mils finished size with 1.0 mils minimum plating. 3. Evaluation circuit board assemblies use SnPb (tin lead) soldering process to attach all components, and are therefore not RoHS compliant. 5 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAAM-007865-0P1R00 Broadband Driver Amplifier 50 to 2000 MHz Rev. V2 Lead-Free 3 mm 12-Lead PQFN Package Outline Dimensions ZZZZ Dimensions are inches / millimeters 6 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.