UF4001 thru UF4007 Vishay General Semiconductor Ultrafast Plastic Rectifier FEATURES • Glass passivated chip junction • Ultrafast reverse recovery time • Low forward voltage drop • Low switching losses, high efficiency • High forward surge capability DO-204AL (DO-41) • Solder dip 260 °C, 40 s • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC TYPICAL APPLICATIONS For use in high frequency rectification and freewheeling application in switching mode converters and inverters for consumer, computer and telecommunication. PRIMARY CHARACTERISTICS IF(AV) 1.0 A VRRM 50 V to 1000 V IFSM 30 A trr 50 ns, 75 ns MECHANICAL DATA VF 1.0 V, 1.7 V Case: DO-204AL (DO-41) TJ max. 150 °C Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix for consumer grade, meets JESD 201 class 1A whisker test Polarity: Color band denotes cathode end MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL UF4001 UF4002 UF4003 UF4004 UF4005 UF4006 UF4007 UNIT Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS voltage VRMS 35 70 140 280 420 560 700 V Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 V Maximum average forward rectified current 0.375" (9.5 mm) lead length at TA = 55 °C IF(AV) 1.0 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 30 A TJ, TSTG - 55 to + 150 °C Operating junction and storage temperature range Document Number: 88755 Revision: 20-Aug-07 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 1 UF4001 thru UF4007 Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS SYMBOL Maximum instantaneous forward voltage (1) 1.0 A VF Maximum DC reverse current at rated DC blocking voltage TA = 25 °C TA = 100 °C IR Maximum reverse recovery time IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A trr Typical junction capacitance 4.0 V, 1 MHz CJ UF4001 UF4002 UF4003 UF4004 UF4005 1.0 UF4006 UF4007 UNIT 1.7 V 10 50 µA 50 75 ns 17 pF Note: (1) Pulse test: 300 µs pulse width, 1 % duty cycle THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL UF4001 UF4002 UF4003 RθJA RθJL Typical thermal resistance (1) UF4004 UF4005 UF4006 UF4007 UNIT 60 15 °C/W Note: (1) Thermal resistance from junction to ambient at 0.375" (9.5 mm) lead length ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE UF4007-E3/54 0.33 54 5500 13" diameter paper tape and reel UF4007-E3/73 0.34 73 3000 Ammo pack packaging RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 30 Resistive or Inductive Load 0.375" (9.5 mm) Lead Length Peak Forward Surge Current (A) Average Forward Rectified Current (A) 1.0 0.5 TA = 55 °C 8.3 ms Single Half Sine-Wave 25 20 15 10 5 0 0 20 40 60 80 100 120 140 160 1 100 10 Ambient Temperature (°C) Number of Cycles at 60 Hz Figure 1. Maximum Forward Current Derating Curve Figure 2. Maximum Non-Repetitive Peak Forward Surge Current www.vishay.com 2 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] Document Number: 88755 Revision: 20-Aug-07 UF4001 thru UF4007 Vishay General Semiconductor 100 UF4001 ~ UF4004 10 Instantaneous Reverse Leakage Current (µA) Instantaneous Forward Current (A) 100 TJ = 150 °C 1 TJ = 125 °C TJ = 100 °C 0.1 TJ = 25 °C 0.01 0.2 TJ = 150 °C TJ = 125 °C 10 TJ = 100 °C 1 0.1 TJ = 25 °C 0.01 UF4005 ~ UF4007 0.001 0.4 0.6 0.8 1.0 1.2 1.4 1.6 0 20 40 80 100 Percent of Peak Reverse Voltage (%) Figure 3. Typical Instantaneous Forward Characteristics Figure 6. Typical Reverse Leakage Characteristics 100 100 10 Junction Capacitance (pF) TJ = 150 °C Instantaneous Reverse Leakage Current (µA) 60 Instantaneous Forward Voltage (V) TJ = 125 °C TJ = 100 °C 1 0.1 TJ = 25 °C 0.01 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p 10 UF4001 ~ UF4004 0.001 0 20 40 60 80 100 1 0.1 1 10 100 Percent of Peak Reverse Voltage (%) Reverse Voltage (V) Figure 4. Typical Reverse Leakage Characteristics Figure 7. Typical Junction Capacitance Instantaneous Forward Current (A) 10 TJ = 150 °C TJ = 125 °C 1 TJ = 100 °C 0.1 TJ = 25 °C UF4005 ~ UF4007 0.01 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 Instantaneous Forward Voltage (V) Figure 5. Typical Instantaneous Forward Characteristics Document Number: 88755 Revision: 20-Aug-07 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 3 UF4001 thru UF4007 Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-204AL (DO-41) 1.0 (25.4) MIN. 0.107 (2.7) 0.080 (2.0) DIA. 0.205 (5.2) 0.160 (4.1) 1.0 (25.4) MIN. 0.034 (0.86) 0.028 (0.71) DIA. www.vishay.com 4 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] Document Number: 88755 Revision: 20-Aug-07 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1