Technical Data Sheet Z-Power LED X10490 Specification SSC-YGUR302TM (Rev 1.0, General) SSC Drawn Approval Customer Approval SSCSSC-YGUR302TM Revision 1.0 www.ZLED.com 서식번호 : SSC-QP-7-07-24 (Rev.00) Technical Data Sheet Z-Power LED X10490 [ Contents ] 1. Absolute maximum ratings 2. Electro-optical characteristics 3. Characteristic diagram 4. Soldering profile 5. Outline dimension 6. Packing 7. Reel packing structure 8. Precaution for use SSCSSC-YGUR302TM Revision 1.0 www.ZLED.com 서식번호 : SSC-QP-7-07-24 (Rev.00) Technical Data Sheet Z-Power LED X10490 SSC-YGUR302TM Description - SSC-YGUR302TM Features Small size suitable for compact appliances • 3.0 X 2.5 X 1.4 mm • Untinted, Inner lens type - Surface-mounted and leadless chip LED device - Tape and Reel packing - Increases the life time of battery clear old • Wavelength : Yellow-Green - 571 nm Red - 638 nm (Red) Applications • Indicator • Other decoration lighting SSCSSC-YGUR302TM Revision 1.0 www.ZLED.com 서식번호 : SSC-QP-7-07-24 (Rev.00) Technical Data Sheet Z-Power LED X10490 1. Absolute maximum ratings (Ta=25℃) Parameter Symbol Value Unit Power Dissipation Pd 66 mW Forward Current IF 30 mA Peak Forward Current IFM *1 60 mA Reverse Voltage VR 5 V Operation Temperature Topr. -30 ~ 85 ℃ Storage Temperature Tstg. -40 ~ 100 ℃ *1 IFM conditions: Pulse width Tw≤0.1ms and Duty ratio≤1/10 2. Electro-Optical Characteristics Parameter Symbol Condition VF IF=20 ㎃ (Ta=25℃) Color Min Typ Max YG - 2.0 2.5 RED - 1.7 2.2 YG 1.3 - 1.8 RED 1.3 - 1.8 YG - - 100 RED - - 100 YG 60 - 130 RED 50 - 120 YG - 571 - RED - 638 - YG - 30 - RED - 30 - YG - 60 - RED - 60 - Forward Voltage Reverse Current Luminous Intensity*2 Wavelength Spectral Bandwidth Viewing Angle*3 Unit V VFM IF=1 uA IR VR=5V IV IF=20 ㎃ λD IF=20 ㎃ Δλ IF=20 ㎃ 2θ1/2 IF=20 ㎃ ㎂ mcd nm nm ˚ *2 The luminous intensity IV is measured at the peak of the spatial pattern which may not be aligned with the mechanical axis of the LED package. *3 θ1/2 is the off-axis where the luminous intensity is 1/2 the peak intensity. [Note] All products confirm to the listed minimum and maximum specifications for electric and optical characteristics, when operated at 20mA within the maximum ratings shown above. All measurements were made under the standardized environment of SSC. (Tolerance : Iv ±10 %, λD ±2 nm, VF ±0.1 V) SSCSSC-YGUR302TM Revision 1.0 www.ZLED.com 서식번호 : SSC-QP-7-07-24 (Rev.00) Forward Current vs Forward Voltage Relative Intensity vs Forward Current 250 10 YG UR Relative Luminous Intensity IV (%) Forward Current [mA] 100 200 150 100 50 YG UR 1 0 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 0 5 Forward Voltage [V] 10 15 20 25 30 35 40 45 50 55 Forward Current IF (mA) Forward Current vs Derating Curve Radiation Diagram 40 90 35 1.0 30 Forward current IF(mA) Technical Data Sheet Z-Power LED X10490 3. Characteristic Diagram 120 YG UR 60 0.8 25 0.6 20 30 0.4 15 0.2 10 0.0 180 5 0 -25 150 0 25 50 75 0 100 o Ambient temperature Ta( C) SSCSSC-YGUR302TM Revision 1.0 www.ZLED.com 서식번호 : SSC-QP-7-07-24 (Rev.00) Technical Data Sheet Z-Power LED X10490 4. Soldering profile Reflow Soldering Conditions/ Profile (1) Lead Solder • Preliminary heating to be at 150℃max. for 2 minutes max. • Soldering heat to be at 240℃max. for 5 seconds max. (2) Lead-Free Solder • Preliminary heating to be at 150℃max. for 2 minutes max. • Soldering heat to be at 260℃max. for 10 seconds max. (3) Hand Soldering Condition • Not more than 3 seconds @MAX280℃, under Soldering iron. [Note] In case the soldered products are reused in soldering process, we don’t guarantee the products. SSCSSC-YGUR302TM Revision 1.0 www.ZLED.com 서식번호 : SSC-QP-7-07-24 (Rev.00) Tolerance: ±0.1, Unit: ㎜ 1.4 0.9 ② 0.6 (0.5) ±0.1 0.9 Cathode Yellow Green ① ② ④ ③ Red 1.0 1.0 2.2 2.0 1.7 3.0 1.4 Cathode ٛٛٛ 1.0 ① ±0.1 0.9min 1.4 2.2 2.5 1.5 Polarity Mark Resin Lens ④ 0.8 ③ Anode P. C. B 0.6 0.5min 1.8 Anode [Recommended Solder pattern] 2.0±0.05 (2.75) 17.5±0.05 1.5 +0.1 -0 4.0±0.1 0.25±0.05 8.0±0.2 4.0±0.1 8.75±0.1 6. Packing YG UR ?1.1±0. 11.4 180 9 ±0.3 +0 -3 +0.2 -0 2 ±0.2 60 Technical Data Sheet Z-Power LED X10490 5. Outline Dimension 22 13 ±0.2 Label Tolerance: ±0.2, Unit: ㎜ (1) Quantity:2,500pcs./Reel (2) Cumulative Tolerance: Cumulative Tolerance/10pitches to be ±0.2mm (3) Adhesion Strength of Cover Tape: Adhesion strength to be 0.1-0.7N when the over tape is turned off from the carrier tape at10˚angle to be the carrier tape. (4) Package: P/N, Manufacturing data Code No. and quantity to be indicated on a damp proof Package. SSCSSC-YGUR302TM Revision 1.0 www.ZLED.com 서식번호 : SSC-QP-7-07-24 (Rev.00) Reel # # # # # # # # # # : N / P ## 제품명 : SSC-YGUR302TM # # # # # # # # # # o N t o L Technical Data Sheet Z-Power LED X10490 7. Reel Packing Structure 수량 : 2500 Aluminum Vinyl Bag # # # # # # # # # # : N / P ## 제품명 : SSC-YGUR302TM # # # # # # # # # # o N t o L 수량 : 2500 Outer Box *Material: Paper(SW3B(B)) SIZE(mm) TYPE a 7inch 245 b 220 c 142 c CHIP LED PART : SSC-YGUR302TM CHIP LED CODE : Q'YT : 25,000EA b a LOT NO : DATE : SEOUL SEMICONDUCTOR CO.,LTD SSCSSC-YGUR302TM Revision 1.0 www.ZLED.com 서식번호 : SSC-QP-7-07-24 (Rev.00) Technical Data Sheet Z-Power LED X10490 8. Precaution for Use (1) Storage In order to avoid the absorption of moisture, it is recommended to store in the dry box (or desiccator) with a desiccant. Otherwise, to store them in the following environment is recommended. Temperature : 5℃~30℃ Humidity : 60%HR max. (2) Attention after opened However LED is corresponded SMD, when LED be soldered dip, interfacial separation may affect the light transmission efficiency, causing the light intensity to drop. Attention in followed. a. After opened and mounted, the soldering shall be quickly. b. Keeping of a fraction Temperature : 5 ~ 40℃ Humidity : less than 30% (3) In case of more than 1 week passed after opening or change color of indicator on desiccant components shall be dried 10-12hr. at 60±5℃. (4) In case of supposed the components is humid, shall be dried dip-solder just before. 100Hr at 80±5℃ or 12Hr at 100±5℃. (5) Any mechanical force or any excess vibration shall not be accepted to apply during cooling process to normal temp. after soldering. (6) Quick cooling shall not be avoid. (7) Components shall not be mounted on warped direction of PCB. (8) Anti radioactive ray design is not considered for the products listed here in. (9) Gallium arsenide is used in some of the products listed in this publication. These products are dangerous if they are burned or smashed in the process of disposal. It is also dangerous to drink the liquid or inhale the gas generated by such products when chemically disposed. (10) This device should not be used in any type of fluid such as water, oil, organic solvent and etc. When washing is required, IPA should be used. (11) When the LEDs are illuminating, operating current should be decided after considering the ambient maximum temperature. (12) LEDs must be stored to maintain a clean atmosphere. If the LEDs are stored for 3 months or more after being shipped from SSC, a sealed container with a nitrogen atmosphere should be used for storage. (13) The LEDs must be soldered within seven days after opening the moisture-proof packing. (14) Repack unused products with anti-moisture packing, fold to close any opening and then store in a dry place. (15) The appearance and specifications of the product may be modified for improvement without notice. SSCSSC-YGUR302TM Revision 1.0 www.ZLED.com 서식번호 : SSC-QP-7-07-24 (Rev.00)