SPECIFICATIONS DESCRIPTION IR LED SPECIFICATION MAKER SPECIFICATION CL-1L3M CODE No. MODEL No. SPECIAL ARTICLES MANAGER 2010. . . CHECK 2010. . APPROVAL . 2010. . A TERM OF VALIDITY MAKER ADDRESS OPTO ELECTRONICS CO,. LTD. (HEAD QUARTER & FACTORY) 1066-12 Younjang-ri Jinan-eup Jinan-gun Jeonbuk, KOREA . YEAR 82-63-433-4566 SPECIFICATIONS PART NAME IR LED SHEET No. 1 of 6 DATE 2010. 04. 23. TYPE No. CL-1L3M CODE No. Features ●Colorless ●Φ3mm transparency lens type all plastic mold type ●Low power consumption ●High radiant intensity Applications ●Infrared remote control and free air transmission system with low forward voltage and confortable radiation angle requirements in combination with PIN photodiodes or phototransistors. Outline Dimensions [unit : mm] PIN Connections 1.Anode 2. Cathode OPTO ELECTRONICS CO., LTD. HEAD OFFICE & FACTORY 1066-12 Younjang-ri Jinan-eup Jinan-gun Jeonbuk, KOREA TEL : 82-63-433-4566∼8 FAX : 82-63-433-4569 http://www.e-oec.com MANAGER CHECK APPROVAL SHEET No. SPECIFICATIONS PART NAME 2 of 6 DATE IR LED 2010. 04. 23. TYPE No. CL-1L3M CODE No. Absolute Maximum Ratings [Ta=25℃] Characteristic Symbol Rating Unit Power dissipation PD 150 ㎽ Forward current IF 100 ㎃ IFP 1.2 A VR 4 V Operating temperature range Topr -25 ~ 85 ℃ Storage temperature range Tstq -30 ~ 100 ℃ 1 * Peak forward current Reverse voltage 2 * Soldering temperature Tsol 260℃ for 10 seconds *1. Duty ratio = 1/16, Pulse width = 0.1ms *2. Keep the distance more than 2.0mm from PCB to the bottom of IRED package Electrical / Optical Charateristics Characteristic 3 [Ta=25℃] Symbol Test Condition Min Typ Max Unit Forward voltage VF IF=80mA 1.35 1.55 1.75 V Radiant intensity IE IF=80mA 32 56 - mW/Sr Peak wavelength λP IF=80mA 838 850 857 nm Spectrum bandwidth Δλ IF=80mA - 50 - nm Reverse current IR VR=4V - - 10 ㎂ θ½ IF=80mA - ±22 - deg * Half angle *3. θ1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity OPTO ELECTRONICS CO., LTD. HEAD OFFICE & FACTORY 1066-12 Younjang-ri Jinan-eup Jinan-gun Jeonbuk, KOREA TEL : 82-63-433-4566∼8 FAX : 82-63-433-4569 http://www.e-oec.com MANAGER CHECK APPROVAL SPECIFICATIONS PART NAME IR LED SHEET No. 3 of 6 DATE 2010. 04. 23. TYPE No. CL-1L3M CODE No. Characteristic Diagram OPTO ELECTRONICS CO., LTD. HEAD OFFICE & FACTORY 1066-12 Younjang-ri Jinan-eup Jinan-gun Jeonbuk, KOREA TEL : 82-63-433-4566∼8 FAX : 82-63-433-4569 http://www.e-oec.com MANAGER CHECK APPROVAL SHEET No. SPECIFICATIONS PART NAME 4 DATE IR LED of 6 2010. 04. 23. TYPE No. CL-1L3M CODE No. No. Part name Dimensions(mm) Quantity(pcs) ① Anti static bag 155×200×0.1t 500 ② Inner box 235×130×110 2,000 ③ Out box 580×280×253 20,000 ④ Standard label Packing Example ② ③ ② ① ④ "Quantity" is the maximum quantity which we can pack. OPTO ELECTRONICS CO., LTD. HEAD OFFICE & FACTORY 1066-12 Younjang-ri Jinan-eup Jinan-gun Jeonbuk, KOREA TEL : 82-63-433-4566∼8 FAX : 82-63-433-4569 http://www.e-oec.com MANAGER CHECK APPROVAL SPECIFICATIONS PART NAME IR LED SHEET No. 5 DATE of 6 2010. 02 08 TYPE No. CL-1L3M CODE No. ※ CAUTIONS 1. This device should not be used in any type of fluid such as water, oil, organic solvent and etc. When washing is required, IPA should be used. 2. When the LEDs are illuminating, operating current should be decided after considering the ambient maximum temperature. 3. LEDs must be stored to maintain a clean atmosphere. If the LEDs are stored for 3months or more after being delivered from OPTO ELECTRONICS CO.,LTD. a sealed container with a nitrogen atmosphere should be used for storage. 4. The LEDs must be reflow soldered within seven days after opening the moisture-proof packing. 5. Repack unused Products with anti-moisture packing, fold to close any opening and then store in a dry place. 6. The appearance and specifications of the product may be modified for improvement without notice. 7. This LEDs is sensitive to the static electricity and surge. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. If Over voltage which exceeds the absolute maximun rating is applied to LEDs, it will cause damage LEDs, and result in destruction. 8. Damaged LEDs will show unusual characteristics such as leak current remarkably increase, turn-on voltage becomes lower and the LEDs get unlight at low current. OPTO ELECTRONICS CO., LTD. HEAD OFFICE & FACTORY 1066-12 Younjang-ri Jinan-eup Jinan-gun Jeonbuk, KOREA TEL : 82-63-433-4566∼8 FAX : 82-63-433-4569 http://www.e-oec.com MANAGER CHECK APPROVAL SPECIFICATIONS PART NAME IR LED SHEET No. 6 DATE of 6 2010. 04. 23. TYPE No. CL-1L3M CODE No. Wave Soldering Conditions / Profile Manual Soldering ․Use a soldering iron of 25W or less. Adjust the Temperature of the soldering iron below 260℃ (5 seconds) OPTO ELECTRONICS CO., LTD. HEAD OFFICE & FACTORY 1066-12 Younjang-ri Jinan-eup Jinan-gun Jeonbuk, KOREA TEL : 82-63-433-4566∼8 FAX : 82-63-433-4569 http://www.e-oec.com MANAGER CHECK APPROVAL