P/Ns 1106396 and 1107254 Row-to-Row DIP Adapter Socket FEATURES •Adapter Socket allows the use of 0.300 [7.62] center devices when the PCB is drilled on 0.600 [15.24] centers and vice versa, giving the flexibility of using 0.600 [15.24] or 0.300 [7.62] center devices in the same application. GENERAL SPECIFICATIONS •SOCKET BODY: black UL 94V-0 glass-filled 4/6 Nylon •PIN BODY: Brass 360 1/2-hard per UNS C36000, ASTM B16/B16M •PIN BODY PLATING: 200µ [5.08µ] min. Sn per ASTM B545 Type 1 over 100µ [2.54µ] Ni per SAE AMS-QQ-N-290B •4-FINGERED COLLET CONTACT: BeCu per UNS C17200, ASTM B194-08 •CONTACT PLATING: 30µ [0.762µ] min. Au per MIL-G-45204 over 50µ [1.27µ] min. Ni per SAE AMS-QQ-N-290 •CONTACT CURRENT RATING: 3 amps •OPERATING TEMPERATURE: 221°F [105°C] •INSERTION FORCE: 180g/pin; based on 0.018 [0.46] dia. test lead •WITHDRAWAL FORCE: 90g/pin; based on 0.018 [0.46] dia. test lead •NORMAL FORCE: 140g/pin; based on 0.018 [0.46] dia. test lead •ACCEPTS LEADS: 0.015-0.025 [0.38-0.64] dia., 0.110-0.150 [2.79-3.81] long MOUNTING CONSIDERATIONS •SUGGESTED PCB HOLE SIZE: 0.035 ±0.002 [0.89 ±0.05] dia. ALL DIMENSIONS: INCHES [MILLIMETERS] CUSTOMIZATION: In addition to the standard products shown on this page, Aries specializes in custom design and production. Special materials, platings, sizes, and configurations can be furnished, depending on the quantity. NOTE: Aries reserves the right to change product general specifications without notice. ORDERING INFORMATION P/N 1106396-XX for 0.300 DIP-to-0.600 PCB [7.62 to 15.24] Adapter, where XX = number of pins (6 thru 40) P/N 1107254-XX for 0.600 DIP-to-0.300 PCB [15.24 to 7.62] Adapter, where XX = number of pins (6 thru 40) ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS Bristol, PA 19007-6810 USA TEL (215) 781-9956 • FAX (215) 781-9845 WWW.ARIESELEC.COM • [email protected] PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED 12030 Rev. AB