DS-327 Flatpack Two-Way Power Divider, 5 - 1000 MHz Rev. V3 Features n n n n n n n FP-2 Broadband, IN Phase Divider Low Loss: 0.3 dB Typical Amplitude Balance: 0.05 dB Typical Impedance: 50 Ohms Nominal Maximum Power Rating or Input Power: 1 Watt Max. Internal Load Dissipation: 0.05 Watts Max. MIL-STD-883 Screening Available Description A Power Divider is ideally a loss less reciprocal device which can also perform vector summation of two or more signals and thus is sometimes called a power combiner or summer. Pin Configuration Pin No. Function Pin No. Function 1 Σ 5 GND 2 GND 6 GND 3 GND 7 GND 4 Output C 8 Output D Electrical Specifications1: TA = -55°C to +85°C Parameter Test Conditions Frequency Units Min Typ Max Insertion Loss Less Coupling 5 - 500 MHz 500 - 1000 MHz dB dB — — — — 0.5 1.0 Isolation — 5 - 500 MHz 500 - 1000 MHz dB dB 25 20 — — — — Amplitude Balance — 5 - 1000 MHz dB — — 0.2 Phase Balance — 5 - 500 MHz 500 - 1000 MHz ° ° — — — — 2 3 VSWR Input Output 10 - 500 MHz 5 - 1000 MHz Ratio Ratio — — — — 1.3:1 1.5:1 1. All specifications apply with 50 ohm source and load impedance. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 considering for development. Performance is based on target specifications, simulated results, and/or prototype • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make not guaranteed. changes to the product(s) or information contained herein without notice. DS-327 Flatpack Two-Way Power Divider, 5 - 1000 MHz Rev. V3 Typical Performance Curves Isolation Insertion Loss 50 Iso latio n (d B ) Insertion Loss (dB) 1.50 1.00 0.50 40 30 20 0.00 1 10 100 500 1000 1 10 100 500 1000 F requency (M H z) F re que nc y ( M H z) VSWR Ordering Information VSWR 1.50 Part Number Package DS-327 PIN FP-2 1.25 1.00 1 10 100 500 1000 F re que nc y ( M H z) 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 considering for development. Performance is based on target specifications, simulated results, and/or prototype • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make not guaranteed. changes to the product(s) or information contained herein without notice.