VISHAY 30CTQ045-N3

VS-30CTQ0..PbF Series, VS-30CTQ0..-N3 Series
www.vishay.com
Vishay Semiconductors
Schottky Rectifier, 2 x 15 A
FEATURES
Base 2
common
cathode
• 175 °C TJ operation
• Very low forward voltage drop
• High frequency operation
Anode
TO-220AB
Anode
2
1 Common 3
cathode
• High
purity,
high
temperature
epoxy
encapsulation for enhanced mechanical strength
and moisture resistance
• Guard ring for enhanced ruggedness and long
term reliability
• Compliant to RoHS Directive 2002/95/EC
PRODUCT SUMMARY
• Designed and qualified according to JEDEC-JESD47
Package
TO-220AB
IF(AV)
2 x 15 A
• Halogen-free according to IEC 61249-2-21 definition
(-N3 only)
VR
35 V, 40 V, 45 V
VF at IF
0.56 V
IRM max.
15 mA at 125 °C
TJ max.
175 °C
Diode variation
Common cathode
EAS
20 mJ
DESCRIPTION
The VS-30CTQ... center tap Schottky rectifier has been
optimized for very low forward voltage drop, with moderate
leakage. The proprietary barrier technology allows for
reliable operation up to 175 °C junction temperature. Typical
applications are in switching power supplies, converters,
freewheeling diodes, and reverse battery protection.
MAJOR RATINGS AND CHARACTERISTICS
CHARACTERISTICS
SYMBOL
IF(AV)
Rectangular waveform
VRRM
VALUES
UNITS
30
A
35 to 45
V
IFSM
tp = 5 μs sine
1060
A
VF
15 Apk, TJ = 125 °C (per leg)
0.56
V
- 55 to 175
°C
TJ
VOLTAGE RATINGS
PARAMETER
SYMBOL
Maximum DC
reverse voltage
VR
Maximum working
peak reverse
voltage
VSVSVSVSVSVSUNITS
30CTQ035PbF 30CTQ035-N3 30CTQ040PbF 30CTQ040-N3 30CTQ045PbF 30CTQ045-N3
35
35
40
40
45
45
V
VRWM
ABSOLUTE MAXIMUM RATINGS
PARAMETER
SYMBOL
TEST CONDITIONS
VALUES
UNITS
Maximum average forward current
See fig. 5
IF(AV)
Maximum peak one cycle non-repetitive
surge current per leg
See fig. 7
IFSM
Non-repetitive avalanche energy per leg
EAS
TJ = 25 °C, IAS = 3.0 A, L = 4.40 mH
20
mJ
IAR
Current decaying linearly to zero in 1 μs
Frequency limited by TJ maximum VA = 1.5 x VR typical
3.0
A
Repetitive avalanche current per leg
Revision: 26-Aug-11
50 % duty cycle at TC = 127 °C, rectangular waveform
5 µs sine or 3 µs rect. pulse
10 ms sine or 6 ms rect. pulse
Following any rated load
condition and with rated
VRRM applied
30
1060
A
265
Document Number: 94187
1
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VS-30CTQ0..PbF Series, VS-30CTQ0..-N3 Series
www.vishay.com
Vishay Semiconductors
ELECTRICAL SPECIFICATIONS
SYMBOL
PARAMETER
TEST CONDITIONS
15 A
Maximum forward voltage drop per leg
See fig. 1
VFM (1)
TJ = 25 °C
30 A
15 A
TJ = 125 °C
30 A
Maximum reverse leakage current per leg
See fig. 2
Maximum junction capacitance per leg
IRM (1)
CT
Typical series inductance per leg
LS
Maximum voltage rate of change
dV/dt
TJ = 25 °C
VR = Rated VR
TJ = 125 °C
VR = 5 VDC (test signal range 100 kHz to 1 MHz) 25 °C
Measured lead to lead 5 mm from package body
Rated VR
VALUES
UNITS
0.62
0.76
V
0.56
0.70
2
15
900
mA
pF
8.0
nH
10 000
V/μs
VALUES
UNITS
- 55 to 175
°C
Note
(1) Pulse width < 300 μs, duty cycle < 2 %
THERMAL - MECHANICAL SPECIFICATIONS
SYMBOL
PARAMETER
Maximum junction and storage
temperature range
TEST CONDITIONS
TJ, TStg
Maximum thermal resistance,
junction to case per leg
RthJC
Maximum thermal resistance,
junction to case per package
Typical thermal resistance,
case to heatsink
RthCS
DC operation
See fig. 4
3.25
DC operation
1.63
Mounting surface, smooth and greased
0.50
Approximate weight
Mounting torque
°C/W
2.0
g
0.07
oz.
minimum
6 (5)
kgf · cm
maximum
12 (10)
(lbf · in)
30CTQ035
Marking device
Case style TO-220AB
30CTQ040
30CTQ045
Revision: 26-Aug-11
Document Number: 94187
2
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VS-30CTQ0..PbF Series, VS-30CTQ0..-N3 Series
Vishay Semiconductors
1000
1000
100
10
TJ = 175 °C
TJ = 125 °C
TJ = 25 °C
1
TJ = 175 °C
100
IR - Reverse Current (mA)
IF - Instantaneous Forward Current (A)
www.vishay.com
TJ = 150 °C
10
TJ = 125 °C
1
TJ = 100 °C
0.1
TJ = 75 °C
0.01
TJ = 50 °C
0.001
0.1
TJ = 25 °C
0.0001
0.2
0
0.4
0.6
0.8
1.0
1.2
1.4
1.6
0
1.8
5
10
15
20
25
30
35
40
45
VFM - Forward Voltage Drop (V)
VR - Reverse Voltage (V)
Fig. 1 - Maximum Forward Voltage Drop Characteristics
(Per Leg)
Fig. 2 - Typical Values of Reverse Current vs.
Reverse Voltage (Per Leg)
CT - Junction Capacitance (pF)
1000
TJ = 25 °C
100
0
10
20
30
50
40
VR - Reverse Voltage (V)
ZthJC - Thermal Impedance (°C/W)
Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage (Per Leg)
10
1
D = 0.75
D = 0.50
D = 0.33
D = 0.25
D = 0.20
0.1
Single pulse
(thermal resistance)
0.01
0.00001
0.0001
0.001
0.01
0.1
1
10
t1 - Rectangular Pulse Duration (s)
Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics (Per Leg)
Revision: 26-Aug-11
Document Number: 94187
3
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VS-30CTQ0..PbF Series, VS-30CTQ0..-N3 Series
www.vishay.com
Vishay Semiconductors
14
RthJC (DC) = 3.25 °C/W
170
160
DC
150
140
D = 0.08
D = 0.17
D = 0.25
D = 0.33
D = 0.50
12
Average Power Loss (W)
Allowable Case Temperature (°C)
180
10
8
RMS limit
6
DC
4
2
130
0
0
2
4
6
8
10 12 14 16 18 20 22
0
2
4
6
8
10 12 14 16 18 20 22
IF(AV) - Average Forward Current (A)
Fig. 5 - Maximum Allowable Case Temperature vs.
Average Forward Current (Per Leg)
Fig. 6 - Forward Power Loss Characteristics (Per Leg)
IFSM - Non-Repetitive Surge Current (A)
IF(AV) - Average Forward Current (A)
1000
At any rated load condition
and with rated VRRM applied
following surge
100
10
100
10 000
1000
tp - Square Wave Pulse Duration (µs)
Fig. 7 - Maximum Non-Repetitive Surge Current (Per Leg)
L
D.U.T.
IRFP460
Rg = 25 Ω
Current
monitor
High-speed
switch
Freewheel
diode
+ Vd = 25 V
40HFL40S02
Fig. 8 - Unclamped Inductive Test Circuit
Revision: 26-Aug-11
Document Number: 94187
4
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VS-30CTQ0..PbF Series, VS-30CTQ0..-N3 Series
www.vishay.com
Vishay Semiconductors
ORDERING INFORMATION TABLE
Device code
VS-
30
C
T
Q
1
2
3
4
5
045 PbF
6
1
-
Vishay Semiconductors product
2
-
Current rating (30 = 30 A)
3
-
Circuit configuration:
4
-
7
C = Common cathode
Package:
T = TO-220
5
-
Schottky “Q” series
6
-
Voltage ratings
7
-
Environmental digit
035 = 35 V
040 = 40 V
045 = 45 V
PbF = Lead (Pb)-free and RoHS compliant
-N3 = Halogen-free, RoHS compliant, and totally lead (Pb)-free
ORDERING INFORMATION (Example)
PREFERRED P/N
QUANTITY PER T/R
MINIMUM ORDER QUANTITY
PACKAGING DESCRIPTION
VS-30CTQ035PbF
50
1000
Antistatic plastic tube
VS-30CTQ035-N3
50
1000
Antistatic plastic tube
VS-30CTQ040PbF
50
1000
Antistatic plastic tube
VS-30CTQ040-N3
50
1000
Antistatic plastic tube
VS-30CTQ045PbF
50
1000
Antistatic plastic tube
VS-30CTQ045-N3
50
1000
Antistatic plastic tube
LINKS TO RELATED DOCUMENTS
Dimensions
Part marking information
Revision: 26-Aug-11
www.vishay.com/doc?95222
TO-220AB PbF
www.vishay.com/doc?95225
TO-220AB -N3
www.vishay.com/doc?95028
Document Number: 94187
5
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Outline Dimensions
Vishay Semiconductors
TO-220AB
DIMENSIONS in millimeters and inches
A
(6)
E
E2
ØP
0.014 M B A M
(7)
A
B
Seating
plane
A
Thermal pad
(E)
A1
1
Q
(6)
D
(H1)
H1
(7)
C
D2 (6)
(6) D
2 3
D
L1 (2)
C
Detail B
D1
3xb
1
2
3
3 x b2
Detail B
C
E1 (6)
L
Base metal
View A - A
c
Plating
c1 (4)
c
A
2x e
A2
e1
(b, b2)
b1, b3
(4)
Section C - C and D - D
0.015 M B A M
Lead assignments
Lead tip
Diodes
Conforms to JEDEC outline TO-220AB
1. - Anode/open
2. - Cathode
3. - Anode
SYMBOL
MILLIMETERS
MIN.
MAX.
4.25
4.65
1.14
1.40
2.56
2.92
0.69
1.01
0.38
0.97
1.20
1.73
1.14
1.73
0.36
0.61
0.36
0.56
14.85
15.25
8.38
9.02
11.68
12.88
INCHES
MIN.
MAX.
0.167
0.183
0.045
0.055
0.101
0.115
0.027
0.040
0.015
0.038
0.047
0.068
0.045
0.068
0.014
0.024
0.014
0.022
0.585
0.600
0.330
0.355
0.460
0.507
NOTES
A
A1
A2
b
b1
4
b2
b3
4
c
c1
4
D
3
D1
D2
6
Notes
(1) Dimensioning and tolerancing as per ASME Y14.5M-1994
(2) Lead dimension and finish uncontrolled in L1
(3) Dimension D, D1 and E do not include mold flash. Mold flash
shall not exceed 0.127 mm (0.005") per side. These dimensions
are measured at the outermost extremes of the plastic body
(4) Dimension b1, b3 and c1 apply to base metal only
(5) Controlling dimensions: inches
(6) Thermal pad contour optional within dimensions E, H1, D2 and
E1
Document Number: 95222
Revision: 08-Mar-11
SYMBOL
E
E1
E2
e
e1
H1
L
L1
ØP
Q

(7)
(8)
MILLIMETERS
MIN.
MAX.
10.11
10.51
6.86
8.89
0.76
2.41
2.67
4.88
5.28
6.09
6.48
13.52
14.02
3.32
3.82
3.54
3.73
2.60
3.00
90° to 93°
INCHES
MIN.
MAX.
0.398
0.414
0.270
0.350
0.030
0.095
0.105
0.192
0.208
0.240
0.255
0.532
0.552
0.131
0.150
0.139
0.147
0.102
0.118
90° to 93°
NOTES
3, 6
6
7
6, 7
2
Dimensions E2 x H1 define a zone where stamping and
singulation irregularities are allowed
Outline conforms to JEDEC TO-220, except A2 (maximum) and
D2 (minimum) where dimensions are derived from the actual
package outline
For technical questions within your region, please contact one of the following:
[email protected], [email protected], [email protected]
www.vishay.com
1
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Revision: 12-Mar-12
1
Document Number: 91000