62 620-004 Backshell Accessory - 90° Strain Relief Rotatable Coupling 620 A A 004 M 16 CONNECTOR DESIGNATOR A-F-L-H-S ROTATABLE COUPLING Product Series Shell Size (Table III) Connector Designator Finish (Table II) Angle and Profile A = 90° Basic Part No. E (Table III) C (Table I) F (Table III) A Thread (Table I) G (Table III) Cable Entry TABLE III: CABLE ENTRY Shell Size Conn. Desig. A,F,L H 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 H Cable Entry E Max .450 (11.4) .450 (11.4) .450 (11.4) .450 (11.4) .450 (11.4) .480 (12.2) .480 (12.2) .480 (12.2) .480 (12.2) F Nom .780 (19.8) .890 (22.6) 1.030 (26.2) 1.220 (31.0) 1.280 (32.5) 1.370 (34.8) 1.560 (39.6) 1.750 (44.5) 1.810 (46.0) G Nom .750 (19.1) .750 (19.1) .937 (23.8) 1.015 (25.8) 1.125 (28.6) 1.188 (30.2) 1.312 (33.3) 1.437 (36.5) 1.562 (39.7) Closed Open .125 (3.2) .250 (6.4) .156 (3.7) .375 (9.5) .188 (4.8) .437 (11.1) .218 (5.5) .562 (14.3) .250 (6.4) .625 (15.9) .312 (7.9) .750 (19.1) .375 (9.5) .875 (22.2) .406 (10.3) .937 (23.8) .562 (14.3) 1.000 (25.4) 1. Cable Entry is defined as the accommodation entry for the wire bundle or cable. Dimensions are not intended for inspection criteria. 2. Metric dimensions (mm) are indicated in parentheses. © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] Series 62 - Page 3