74LVC1G86 SINGLE 2 INPUT EXCLUSIVE OR GATE Description Pin Assignments (Top View) The 74LVC1G86 is a single 2-input EXCLUSIVE OR gate with a standard totem pole output. The device is designed for A 1 B 2 5 Vcc 4 Y operation with a power supply range of 1.65V to 5.5V. The inputs are tolerant to 5.5V allowing this device to be used in a mixed voltage environment. The device is fully specified for GND 3 NEW PRODUCT partial power down applications using IOFF. The IOFF circuitry disables the output preventing damaging current backflow SOT25 / SOT353 when the device is powered down. The gate performs the positive Boolean function: Y = A ⊕B or (Top View) Y = AB + A B A 1 6 Vcc B 2 5 NC GND 3 4 Y Features • • • • • Wide Supply Voltage Range from 1.65 to 5.5V ± 24mA Output Drive at 3.3V CMOS low power consumption IOFF Supports Partial-Power-Down Mode Operation Inputs accept up to 5.5V • ESD Protection Tested per JESD 22 DFN1410 (Note 2) Applications Exceeds 200-V Machine Model (A115-A) Exceeds 2000-V Human Body Model (A114-A) • • • • • Latch-Up Exceeds 100mA per JESD 78, Class II Range of Package Options Direct Interface with TTL Levels SOT25, SOT353, and DFN1410: Assembled with “Green” Molding Compound (no Br, Sb) Lead Free Finish/ RoHS Compliant (Note 1) Notes: • • • • • • • Voltage Level Shifting Bus Driver / Repeater Parity Bit Generation Selectable signal Inverter Power Down Signal Isolation General Purpose Logic Wide array of products such as. o PCs, networking, notebooks, netbooks, PDAs o Computer peripherals, hard drives, CD/DVD ROM o TV, DVD, DVR, set top box o Cell Phones, Personal Navigation / GPS o MP3 players ,Cameras, Video Recorders 1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied. Please visit our website at http://www.diodes.com/products/lead_free.html. 2. Pin 2 and pin 5 of the DFN1410 package are internally connected. 74LVC1G86 Document number: DS32201 Rev. 2 - 2 1 of 14 www.diodes.com October 2010 © Diodes Incorporated 74LVC1G86 SINGLE 2 INPUT EXCLUSIVE OR GATE Pin Descriptions Pin Name A Data Input B Data Input GND Y NEW PRODUCT Description Ground Data Output Vcc Supply Voltage NC No Connection Logic Diagram A B 1 4 Y 2 Function Table Inputs Output A B Y H H L L H H H L H L L L 74LVC1G86 Document number: DS32201 Rev. 2 - 2 2 of 14 www.diodes.com October 2010 © Diodes Incorporated 74LVC1G86 SINGLE 2 INPUT EXCLUSIVE OR GATE Absolute Maximum Ratings (Note 3) Symbol Rating Unit 2 200 KV V Supply Voltage Range -0.5 to 6.5 V VI Input Voltage Range -0.5 to 6.5 V Vo Voltage applied to output in high impedance or IOFF state -0.5 to 6.5 V Vo Voltage applied to output in high or low state. -0.3 to VCC +0.5 V IIK Input Clamp Current VI<0 -50 mA IOK Output Clamp Current -50 mA IO Continuous output current ±50 mA Continuous current through Vdd or GND ±100 mA Operating Junction Temperature -40 to 150 °C Storage Temperature -65 to 150 °C ESD HBM ESD MM NEW PRODUCT VCC TJ TSTG Notes: Description Human Body Model ESD Protection Machine Model ESD Protection 3. Stresses beyond the absolute maximum may result in immediate failure or reduced reliability. These are stress values and device operation should be within recommend values. 74LVC1G86 Document number: DS32201 Rev. 2 - 2 3 of 14 www.diodes.com October 2010 © Diodes Incorporated 74LVC1G86 SINGLE 2 INPUT EXCLUSIVE OR GATE Recommended Operating Conditions (Note 4) Symbol VCC Operating Voltage Parameter Operating Data retention only VCC = 1.65V to 1.95V High-level Input Voltage NEW PRODUCT VIH VCC = 2.3V to 2.7V VCC = 3V to 3.6V VCC = 4.5V to 5.5V Min 1.65 1.5 Low-level input voltage Unit V V 0.65 X VCC 1.7 V 2 0.7 X VCC VCC = 1.65V to 1.95 V VIL Max 5.5 0.35 X VCC VCC = 2.3V to 2.7V 0.7 VCC = 3V to 3.6V 0.8 VCC = 4.5V to 5.5V V 0.3 X VCC VI Input Voltage 0 5.5 V VO Output Voltage 0 VCC V IOH Low-level output current IOL Δt/ΔV TA Notes: High-level output current VCC = 1.65V -4 VCC = 2.3V -8 VCC = 3V -16 -24 VCC = 4.5V -32 VCC = 1.65V 4 VCC = 2.3V 8 VCC = 3V 16 24 VCC = 4.5V 32 VCC = 1.8V ± 0.15V, 2.5V ± 0.2V Input transition rise or fall VCC = 3.3V ± 0.3V rate VCC = 5V ± 0.5V Operating free-air temperature mA mA 20 10 ns/V 5 -40 85 ºC 4. Unused inputs should be held at Vcc or Ground. 74LVC1G86 Document number: DS32201 Rev. 2 - 2 4 of 14 www.diodes.com October 2010 © Diodes Incorporated 74LVC1G86 SINGLE 2 INPUT EXCLUSIVE OR GATE Electrical Characteristics (All typical values are at Vcc = 3.3V, TA = 25°C) Over recommended free-air temperature range (unless otherwise noted) Symbol Parameter Test Conditions Vcc Min 1.65V to 5.5V VCC – 0.1 IOH = -4mA 1.65V 1.2 IOH = -8mA 2.3V 1.9 IOH = -100μA NEW PRODUCT VOH High Level Output Voltage IOH = -16mA 3V IOH = -24mA VOL High-level Input Voltage 0.1 IOL = 4mA 1.65V 0.45 IOL = 8mA 2.3V 0.3 IOFF Power Down Leakage Current VI or VO = 5.5V ICC Supply Current VI = 5.5V of GND IO=0 ΔICC Additional Supply Current One input at VCC – 0.6 V Other inputs at VCC or GND Ci Input Capacitance Notes: Thermal Resistance Junction-to-Case Vi = VCC – or GND SOT25 SOT353 DFN1410 SOT25 SOT353 DFN1410 3.8 V 0.4 3V VI = 5.5 V or GND θJC 2.3 1.65V to 5.5V Input Current θJA V IOL = 100μA IOL = 16mA Unit 2.4 4.5V 0.55 4.5V 0.55 0 to 5.5V ±5 μA 0 ± 10 μA 10 μA 500 μA IOL = 32mA Thermal Resistance Junction-to-Ambient Max IOH = -32mA IOL = 24mA II Typ. 1.65 V to 5.5V 3 V to 5.5V 3.3 (Note 5) (Note 5) (Note 5) (Note 5) (Note 5) (Note 5) 4 204 371 430 52 143 190 pF o C/W C/W o C/W o C/W o C/W o C/W o 5. Test condition for SOT25, SOT353, and DFN1410: Device mounted on FR-4 substrate PC board, 2oz copper, with minimum recommended pad layout. 74LVC1G86 Document number: DS32201 Rev. 2 - 2 5 of 14 www.diodes.com October 2010 © Diodes Incorporated 74LVC1G86 SINGLE 2 INPUT EXCLUSIVE OR GATE Switching Characteristics Over recommended free-air temperature range, CL = 15pF (see Figure 1) Vcc = 1.8 V Vcc = 2.5 V From TO ± 0.15V ± 0.2V Parameter (Input) (OUTPUT) Min Max Min Max A or B NEW PRODUCT tpd 2.1 Y 9.1 1.0 4.5 Vcc = 3.3 V ± 0.3V Min Max Vcc = 5 V ± 0.5V Min Max 0.6 0.8 4.0 Over recommended free-air temperature range, CL = 30 or 50pF as noted (see Figure 2) Vcc = 1.8 V Vcc = 2.5 V Vcc = 3.3 V From TO ± 0.15V ± 0.2V ± 0.3V Parameter (Input) (OUTPUT) Min Max Min Max Min Max A or B tpd Y 3.5 9.9 1.8 5.5 1.3 5.0 3.3 Vcc = 5 V ± 0.5V Min Max 1.0 4.0 Unit ns Unit ns Operating Characteristics TA = 25 ºC Parameter Cpd Power dissipation capacitance 74LVC1G86 Document number: DS32201 Rev. 2 - 2 Test Conditions Vcc = 1.8 V Vcc = 2.5 V Vcc = 3.3 V Vcc = 5 V TYP TYP TYP TYP f = 10 MHz 22 22 22 24 6 of 14 www.diodes.com Unit pF October 2010 © Diodes Incorporated 74LVC1G86 SINGLE 2 INPUT EXCLUSIVE OR GATE NEW PRODUCT Parameter Measurement Information Inputs Vcc 1.8V±0.15V 2.5V±0.2V 3.3V±0.3V 5V±0.5V VI VCC VCC 3V VCC tr/tf ≤2ns ≤2ns ≤2.5ns ≤2.5ns VM CL RL VCC/2 VCC/2 1.5V VCC/2 15pF 15pF 15pF 15pF 1MΩ 1MΩ 1MΩ 1MΩ Voltage Waveform Pulse Duration Voltage Waveform Propagation Delay Times Inverting and Non Inverting Outputs Figure 1. Load Circuit and Voltage Waveforms Notes: A. Includes test lead and test apparatus capacitance. B. All pulses are supplied at pulse repetition rate ≤ 10 MHz. C. Inputs are measured separately one transition per measurement. D. tPLH and tPHL are the same as tPD. 74LVC1G86 Document number: DS32201 Rev. 2 - 2 7 of 14 www.diodes.com October 2010 © Diodes Incorporated 74LVC1G86 SINGLE 2 INPUT EXCLUSIVE OR GATE NEW PRODUCT Parameter Measurement Information (Continued) Inputs Vcc 1.8V±0.15V 2.5V±0.2V 3.3V±0.3V 5V±0.5V VI VCC VCC 3V VCC tr/tf ≤2ns ≤2ns ≤2.5ns ≤2.5ns VM CL RL VCC/2 VCC/2 1.5V VCC/2 30pF 30pF 50pF 50pF 1KΩ 500Ω 500Ω 500Ω Voltage Waveform Pulse Duration Voltage Waveform Propagation Delay Times Inverting and Non Inverting Outputs Figure 2. Load Circuit and Voltage Waveforms Notes: A. Includes test lead and test apparatus capacitance. B. All pulses are supplied at pulse repetition rate ≤ 10 MHz. C. Inputs are measured separately one transition per measurement. D. tPLH and tPHL are the same as tPD. 74LVC1G86 Document number: DS32201 Rev. 2 - 2 8 of 14 www.diodes.com October 2010 © Diodes Incorporated 74LVC1G86 SINGLE 2 INPUT EXCLUSIVE OR GATE Ordering Information 74LVC1G 86 XXX - 7 NEW PRODUCT Logic Device 74 : Logic Prefix LVC : 1.65 to 5.5V Family 1G : One gate Device 74LVC1G86W5-7 74LVC1G86SE-7 74LVC1G86FZ4-7 Notes: Package Code W5 SE FZ4 Function 86 : Exclusive OR-Gate Packaging (Note 6) SOT25 SOT353 DFN1410 Package W5 : SOT25 SE : SOT353 FZ4 : DFN1410 Packing 7 : Tape & Reel 7” Tape and Reel Quantity Part Number Suffix 3000/Tape & Reel -7 3000/Tape & Reel -7 5000/Tape & Reel -7 6. Pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at http://www.diodes.com/datasheets/ap02001.pdf. 74LVC1G86 Document number: DS32201 Rev. 2 - 2 9 of 14 www.diodes.com October 2010 © Diodes Incorporated 74LVC1G86 SINGLE 2 INPUT EXCLUSIVE OR GATE Marking Information (1) SOT25 and SOT353 (Top View) 4 7 5 XX : Identification code Y : Year 0~9 W : Week : A~Z : 1~26 week; a~z : 27~52 week; z represents 52 and 53 week X : A~Z : Internal code NEW PRODUCT XX Y W X 1 2 3 Part Number 74LVC1G86W5 74LVC1G86SE Package SOT25 SOT353 Identification Code UX UX (3) DFN1410 (Top View) XX YWX Part Number 74LVC1G86FZ4 74LVC1G86 Document number: DS32201 Rev. 2 - 2 XX : Identification Code Y : Year : 0~9 W : Week : A~Z : 1~26 week; a~z : 27~52 week; z represents 52 and 53 week X : A~Z : Internal code Package DFN1410 10 of 14 www.diodes.com Identification Code UX October 2010 © Diodes Incorporated 74LVC1G86 SINGLE 2 INPUT EXCLUSIVE OR GATE Package Outline Dimensions (All Dimensions in mm) NEW PRODUCT (1) Package Type: SOT25 (2) Package Type: SOT353 6x-0.42 CL 0.10/0.30 C L 0.40/0.45 0.65Bsc. 0.25/0.40 C L 1.8/2.2 74LVC1G86 Document number: DS32201 Rev. 2 - 2 0.1/0.22 Detail"A" 0.9/1.0 0/0.1 1.10Max. Gauge Plane Land Pattern Recommendation (unit:mm) Top View 0.25 PIN 1 0°/8 ° C L 6x-0.60 2x-0.65 1.15/1.35 2.0/2.2 C L 1.9 1.3 "A" 11 of 14 www.diodes.com October 2010 © Diodes Incorporated 74LVC1G86 SINGLE 2 INPUT EXCLUSIVE OR GATE Package Outline Dimensions (Continued) Side View 1.35/1.45 0.550 6x-0.25 2X- NEW PRODUCT C 6x-0.35 Seating Plane 0.25 A 0.08 C 0.13Typ. 0.40Max. 0.10 C 6x- 0/0.05 (3) Package Type: DFN1410 A 0.50Typ. 2X- (Pin #1 ID) X 45¢ . 1x 0 C 0.075¡ 0Ó.030 6x-0.25/0.35 0.95/1.05 B 4x-0.50Typ. Land Pattern Recommendation (mm) Top View 0.25 B 0.10(4x) 6x-0.15/0.25 0.10 C A B Bottom View 74LVC1G86 Document number: DS32201 Rev. 2 - 2 12 of 14 www.diodes.com October 2010 © Diodes Incorporated 74LVC1G86 SINGLE 2 INPUT EXCLUSIVE OR GATE Taping Orientation (Note 7) NEW PRODUCT For DFN1410 Notes: 7. The taping orientation of the other package type can be found on our website at http://www.diodes.com/datasheets/ap02007.pdf 74LVC1G86 Document number: DS32201 Rev. 2 - 2 13 of 14 www.diodes.com October 2010 © Diodes Incorporated 74LVC1G86 SINGLE 2 INPUT EXCLUSIVE OR GATE IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). NEW PRODUCT Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2010, Diodes Incorporated www.diodes.com 74LVC1G86 Document number: DS32201 Rev. 2 - 2 14 of 14 www.diodes.com October 2010 © Diodes Incorporated