VS-8ETU04PbF Vishay Semiconductors Ultrafast Rectifier, 8 A FRED Pt® FEATURES Base cathode 2 • Ultrafast recovery time • Low forward voltage drop • 175 °C operating junction temperature • Low leakage current TO-220AC • Compliant to RoHS Directive 2002/95/EC 3 Anode 1 Cathode • Designed and qualified for industrial level DESCRIPTION/APPLICATIONS FRED Pt® series are the state of the art ultrafast recovery rectifiers specifically designed with optimized performance of forward voltage drop and ultrafast recovery time. PRODUCT SUMMARY Package TO-220AC IF(AV) 8A VR 400 V The planar structure and the platinum doped life time control, guarantee the best overall performance, ruggedness and reliability characteristics. VF at IF 1.3 V trr typ. See Recovery table TJ max. 175 °C Diode variation Single die These devices are intended for use in the output rectification stage of SMPS, UPS, DC/DC converters as well as freewheeling diode in low voltage inverters and chopper motor drives. Their extremely optimized stored charge and low recovery current minimize the switching losses and reduce over dissipation in the switching element and snubbers. ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS 400 V Repetitive peak reverse voltage VRRM Average rectified forward current IF(AV) TC = 155 °C 8 Non-repetitive peak surge current IFSM TC = 25 °C 100 Repetitive peak forward current Operating junction and storage temperatures A IFRM 16 TJ, TStg - 65 to 175 °C ELECTRICAL SPECIFICATIONS (TJ = 25 °C unless otherwise specified) PARAMETER Breakdown voltage, blocking voltage Forward voltage SYMBOL VBR, VR VF TEST CONDITIONS IR = 100 μA IF = 8 A MIN. TYP. MAX. 400 - - - 1.19 1.3 IF = 8 A, TJ = 150 °C - 0.94 1.0 VR = VR rated - 0.2 10 TJ = 150 °C, VR = VR rated - 20 500 UNITS V μA Reverse leakage current IR Junction capacitance CT VR = 400 V - 14 - pF Series inductance LS Measured lead to lead 5 mm from package body - 8.0 - nH Document Number: 94030 Revision: 28-Apr-11 For technical questions within your region, please contact one of the following: www.vishay.com [email protected], [email protected], [email protected] 1 This datasheet is subject to change without notice. THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-8ETU04PbF Vishay Semiconductors Ultrafast Rectifier, 8 A FRED Pt® DYNAMIC RECOVERY CHARACTERISTICS (TJ = 25 °C unless otherwise specified) PARAMETER Reverse recovery time SYMBOL trr TEST CONDITIONS MIN. TYP. MAX. IF = 1.0 A, dIF/dt = 50 A/μA, VR = 30 V TJ = 25 °C - 35 60 - 43 - - 67 - - 2.8 - - 6.3 - TJ = 25 °C - 60 - TJ = 125 °C - 210 - MIN. TYP. MAX. - 1.8 2 TJ = 125 °C Peak recovery current Reverse recovery charge IRRM Qrr TJ = 25 °C TJ = 125 °C IF = 8 A dIF/dt = 200 A/μs VR = 200 V UNITS ns A nC THERMAL - MECHANICAL SPECIFICATIONS PARAMETER SYMBOL TEST CONDITIONS UNITS Thermal resistance, junction to case RthJC Thermal resistance, junction to ambient RthJA Typical socket mount - - 50 Thermal resistance, case to heatsink RthCS Mounting surface, flat, smooth and greased - 0.5 - - 2.0 - - 0.07 - oz. - 12 (10) kgf · cm (lbf · in) Weight 6.0 (5.0) Mounting torque Marking device www.vishay.com 2 Case style TO-220AC °C/W g 8ETU04 For technical questions within your region, please contact one of the following: Document Number: 94030 [email protected], [email protected], [email protected] Revision: 28-Apr-11 This datasheet is subject to change without notice. THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-8ETU04PbF Ultrafast Rectifier, 8 A FRED Pt® 1000 IR - Reverse Current (µA) IF - Instantaneous Forward Current (A) 100 Vishay Semiconductors 10 TJ = 175 °C TJ = 150 °C TJ = 25 °C 1 TJ = 175 °C 100 TJ = 150 °C 10 TJ = 125 °C TJ = 100 °C 1 0.1 TJ = 25 °C 0.01 0.001 0.0001 0.1 0.5 0 1.0 2.0 1.5 0 2.5 100 200 400 300 VF - Forward Voltage Drop (V) VR - Reverse Voltage (V) Fig. 1 - Typical Forward Voltage Drop Characteristics Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage CT - Junction Capacitance (pF) 1000 100 TJ = 25 °C 10 0 100 200 300 400 VR - Reverse Voltage (V) ZthJC - Thermal Impedance (°C/W) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage 10 1 PDM 0.1 Single pulse (thermal resistance) 0.01 0.00001 0.0001 t1 D = 0.50 D = 0.20 D = 0.10 D = 0.05 D = 0.02 D = 0.01 t2 Notes: 1. Duty factor D = t1/t2 . 2. Peak TJ = PDM x ZthJC + TC 0.001 0.01 0.1 . 1 t1 - Rectangular Pulse Duration (s) Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics Document Number: 94030 Revision: 28-Apr-11 For technical questions within your region, please contact one of the following: www.vishay.com [email protected], [email protected], [email protected] 3 This datasheet is subject to change without notice. THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-8ETU04PbF Vishay Semiconductors Ultrafast Rectifier, 8 A FRED Pt® 90 170 DC 70 160 Square wave (D = 0.50) Rated VR applied 150 60 50 40 IF = 16 A IF = 8 A 140 30 See note (1) 20 100 130 0 2 4 6 8 10 12 1000 IF(AV) - Average Forward Current (A) dIF/dt (A/µs) Fig. 5 - Maximum Allowable Case Temperature vs. Average Forward Current Fig. 7 - Typical Reverse Recovery Time vs. dIF/dt 500 14 450 12 400 10 VR = 200 V TJ = 125 °C TJ = 25 °C 350 RMS limit 8 D = 0.01 D = 0.02 D = 0.05 D = 0.10 D = 0.20 D = 0.50 6 4 DC 2 2 4 300 IF = 16 A IF = 8 A 250 200 150 100 50 0 0 Qrr (nC) Average Power Loss (W) VR = 200 V TJ = 125 °C TJ = 25 °C 80 trr (ns) Allowable Case Temperature (°C) 180 6 8 10 12 0 100 1000 IF(AV) - Average Forward Current (A) dIF/dt (A/µs) Fig. 6 - Forward Power Loss Characteristics Fig. 8 - Typical Stored Charge vs. dIF/dt Note (1) Formula used: T = T - (Pd + Pd C J REV) x RthJC; Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6); PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = Rated VR www.vishay.com 4 For technical questions within your region, please contact one of the following: Document Number: 94030 [email protected], [email protected], [email protected] Revision: 28-Apr-11 This datasheet is subject to change without notice. THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-8ETU04PbF Ultrafast Rectifier, 8 A FRED Pt® Vishay Semiconductors VR = 200 V 0.01 Ω L = 70 μH D.U.T. dIF/dt adjust D IRFP250 G S Fig. 9 - Reverse Recovery Parameter Test Circuit (3) trr IF ta tb 0 Qrr (2) IRRM (4) 0.5 IRRM dI(rec)M/dt (5) 0.75 IRRM (1) dIF/dt (1) dIF/dt - rate of change of current through zero crossing (2) IRRM - peak reverse recovery current (3) trr - reverse recovery time measured from zero crossing point of negative going IF to point where a line passing through 0.75 IRRM and 0.50 IRRM extrapolated to zero current. (4) Qrr - area under curve defined by trr and IRRM Qrr = trr x IRRM 2 (5) dI(rec)M/dt - peak rate of change of current during tb portion of trr Fig. 10 - Reverse Recovery Waveform and Definitions Document Number: 94030 Revision: 28-Apr-11 For technical questions within your region, please contact one of the following: www.vishay.com [email protected], [email protected], [email protected] 5 This datasheet is subject to change without notice. THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-8ETU04PbF Ultrafast Rectifier, 8 A FRED Pt® Vishay Semiconductors ORDERING INFORMATION TABLE Device code VS- 8 E T U 04 PbF 1 2 3 4 5 6 7 1 - Vishay Semiconductors product 2 - Current rating (8 = 8 A) 3 - E = Single diode 4 - Package: T = TO-220 4 5 - U = Ultrafast recovery 6 - Voltage rating (04 = 400 V) 7 - PbF = Lead (Pb)-free Tube standard pack quantity: 50 pieces LINKS TO RELATED DOCUMENTS Dimensions www.vishay.com/doc?95221 Part marking information www.vishay.com/doc?95224 SPICE model www.vishay.com/doc?95441 www.vishay.com 6 For technical questions within your region, please contact one of the following: Document Number: 94030 [email protected], [email protected], [email protected] Revision: 28-Apr-11 This datasheet is subject to change without notice. THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Outline Dimensions Vishay Semiconductors TO-220AC DIMENSIONS in millimeters and inches (6) B Seating plane A E A ØP 0.014 M B A M E2 (7) Q 3 D D L1 E A1 C Thermal pad C H1 D2 Detail B (6) 2 x b2 2xb Detail B θ D1 1 2 A (6) H1 (7) (6) D 1 2 3 Lead tip L3 C E1 (6) Lead assignments Diodes 1 + 2 - Cathode 3 - Anode L4 L c e1 A Conforms to JEDEC outline TO-220AC View A - A A2 0.015 M B A M SYMBOL MILLIMETERS INCHES NOTES SYMBOL MIN. MAX. MIN. MAX. A 4.25 4.65 0.167 0.183 E1 A1 1.14 1.40 0.045 0.055 A2 2.56 2.92 0.101 0.115 b 0.69 1.01 0.027 0.040 b1 0.38 0.97 0.015 0.038 b2 1.20 1.73 0.047 0.068 b3 1.14 1.73 0.045 0.068 MILLIMETERS INCHES MAX. MIN. MAX. 6.86 8.89 0.270 0.350 6 E2 - 0.76 - 0.030 7 e 2.41 2.67 0.095 0.105 e1 4.88 5.28 0.192 0.208 4 H1 6.09 6.48 0.240 0.255 L 13.52 14.02 0.532 0.552 4 L1 3.32 3.82 0.131 0.150 c 0.36 0.61 0.014 0.024 L3 1.78 2.13 0.070 0.084 c1 0.36 0.56 0.014 0.022 4 L4 0.76 1.27 0.030 0.050 D 14.85 15.25 0.585 0.600 3 ØP 3.54 3.73 0.139 0.147 Q 2.60 3.00 0.102 0.118 D1 8.38 9.02 0.330 0.355 D2 11.68 12.88 0.460 0.507 6 E 10.11 10.51 0.398 0.414 3, 6 NOTES MIN. 90° to 93° 6, 7 2 2 90° to 93° Notes (1) Dimensioning and tolerancing as per ASME Y14.5M-1994 (2) Lead dimension and finish uncontrolled in L1 (3) Dimension D, D1 and E do not include mold flash. Mold flash shall not exceed 0.127 mm (0.005") per side. These dimensions are measured at the outermost extremes of the plastic body (4) Dimension b1, b3 and c1 apply to base metal only (5) Controlling dimension: inches (6) Thermal pad contour optional within dimensions E, H1, D2 and E1 (7) Dimension E2 x H1 define a zone where stamping and singulation irregularities are allowed (8) Outline conforms to JEDEC TO-220, D2 (minimum) where dimensions are derived from the actual package outline Document Number: 95221 Revision: 07-Mar-11 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 1 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1