IRF IRHM57Z60

PD - 93786B
RADIATION HARDENED
POWER MOSFET
THRU-HOLE (TO-254AA)
IRHM57Z60
30V, N-CHANNEL
4#
TECHNOLOGY
c
Product Summary
Part Number Radiation Level RDS(on)
IRHM57Z60
100K Rads (Si) 0.0095Ω
IRHM53Z60
300K Rads (Si) 0.0095Ω
ID
35A*
35A*
IRHM54Z60
600K Rads (Si)
0.0095Ω
35A*
IRHM58Z60
1000K Rads (Si)
0.010Ω
35A*
International Rectifier’s R5TM technology provides
high performance power MOSFETs for space applications. These devices have been characterized for
Single Event Effects (SEE) with useful performance
up to an LET of 80 (MeV/(mg/cm2)). The combination
of low RDS(on) and low gate charge reduces the power
losses in switching applications such as DC to DC
converters and motor control. These devices retain
all of the well established advantages of MOSFETs
such as voltage control, fast switching, ease of paralleling and temperature stability of electrical parameters.
TO-254AA
Features:
n
n
n
n
n
n
n
n
n
n
n
Single Event Effect (SEE) Hardened
Neutron Tolerant
Identical Pre- and Post-Electrical Test Conditions
Repetitive Avalanche Ratings
Dynamic dv/dt Ratings
Simple Drive Requirements
Ease of Paralleling
Hermatically Sealed
Electically Isolated
Ceramic Eyelets
Light Weight
Absolute Maximum Ratings
Pre-Irradiation
Parameter
ID @ VGS = 12V, TC = 25°C
ID @ VGS = 12V, TC = 100°C
IDM
PD @ TC = 25°C
VGS
EAS
IAR
EAR
dv/dt
TJ
T STG
Continuous Drain Current
Continuous Drain Current
Pulsed Drain Current ➀
Max. Power Dissipation
Linear Derating Factor
Gate-to-Source Voltage
Single Pulse Avalanche Energy ➁
Avalanche Current ➀
Repetitive Avalanche Energy ➀
Peak Diode Recovery dv/dt ➂
Operating Junction
Storage Temperature Range
Lead Temperature
Weight
Units
35*
35*
140
250
2.0
±20
500
35
25
1.1
-55 to 150
A
W
W/°C
V
mJ
A
mJ
V/ns
o
300 (0.063 in./1.6 mm from case for 10s)
9.3 (Typical)
C
g
* Current is limited by internal wire diameter
For footnotes refer to the last page
www.irf.com
1
08/06/02
IRHM57Z60
Pre-Irradiation
Electrical Characteristics @ Tj = 25°C (Unless Otherwise Specified)
Min
IGSS
IGSS
Qg
Q gs
Q gd
td(on)
tr
td(off)
tf
LS + LD
Gate-to-Source Leakage Forward
Gate-to-Source Leakage Reverse
Total Gate Charge
Gate-to-Source Charge
Gate-to-Drain (‘Miller’) Charge
Turn-On Delay Time
Rise Time
Turn-Off Delay Time
Fall Time
Total Inductance
Typ Max Units
Test Conditions
30
—
—
V
VGS = 0V, ID = 1.0mA
—
0.028
—
V/°C
Reference to 25°C, ID = 1.0mA
—
—
0.0095
Ω
2.0
45
—
—
—
—
—
—
4.0
—
10
25
V
S( )
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
6.8
100
-100
200
55
40
35
125
80
50
—
VGS = 12V, ID = 35A ➃
nC
VDS = VGS, ID = 1.0mA
VDS > 15V, IDS = 35A ➃
VDS= 24V ,VGS=0V
VDS = 24V,
VGS = 0V, TJ = 125°C
VGS = 20V
VGS = -20V
VGS =12V, ID = 35A
VDS = 15V
ns
VDD = 15V, ID = 35A
VGS =12V, RG = 2.35Ω
Ω
Parameter
BVDSS
Drain-to-Source Breakdown Voltage
∆BV DSS/∆T J Temperature Coefficient of Breakdown
Voltage
RDS(on)
Static Drain-to-Source On-State
Resistance
VGS(th)
Gate Threshold Voltage
gfs
Forward Transconductance
IDSS
Zero Gate Voltage Drain Current
µA
nA
nH Measured from Drain lead (6mm /0.25in.
from package) to Source lead (6mm /0.25in.
from package) with Source wires internally
bonded from Source Pin to Drain Pad
Ciss
Coss
Crss
Input Capacitance
Output Capacitance
Reverse Transfer Capacitance
—
—
—
9720
4230
56
—
—
—
VGS = 0V, VDS = 25V
f = 1.0MHz
pF
Source-Drain Diode Ratings and Characteristics
Parameter
Min Typ Max Units
IS
ISM
VSD
t rr
Q RR
Continuous Source Current (Body Diode)
Pulse Source Current (Body Diode) ➀
Diode Forward Voltage
Reverse Recovery Time
Reverse Recovery Charge
ton
Forward Turn-On Time
—
—
—
—
—
—
—
—
—
—
35*
140
1.2
153
324
Test Conditions
A
V
ns
nC
Tj = 25°C, IS = 35A, VGS = 0V ➃
Tj = 25°C, IF = 35A, di/dt ≤ 100A/µs
VDD ≤ 25V ➃
Intrinsic turn-on time is negligible. Turn-on speed is substantially controlled by LS + LD.
* Current is limited by internal wire diameter
Thermal Resistance
Parameter
R thJC
RthCS
RthJA
Junction-to-Case
Case-to-Sink
Junction-to-Ambient
Min Typ Max Units
—
—
—
— 0.50
0.21 —
—
48
Test Conditions
°C/W
Typical socket mount
Note: Corresponding Spice and Saber models are available on the G&S Website.
For footnotes refer to the last page
2
www.irf.com
Radiation Characteristics
Pre-Irradiation
IRHM57Z60
International Rectifier Radiation Hardened MOSFETs are tested to verify their radiation hardness capability.
The hardness assurance program at International Rectifier is comprised of two radiation environments.
Every manufacturing lot is tested for total ionizing dose (per notes 5 and 6) using the TO-3 package. Both
pre- and post-irradiation performance are tested and specified using the same drive circuitry and test
conditions in order to provide a direct comparison.
Table 1. Electrical Characteristics @ Tj = 25°C, Post Total Dose Irradiation ➄➅
Parameter
BVDSS
VGS(th)
IGSS
IGSS
IDSS
RDS(on)
RDS(on)
VSD
Up to 600K Rads(Si)1 1000K Rads (Si)2 Units
Min
Max
Min
Max
Drain-to-Source Breakdown Voltage
Gate Threshold Voltage
Gate-to-Source Leakage Forward
Gate-to-Source Leakage Reverse
Zero Gate Voltage Drain Current
Static Drain-to-Source ➃
On-State Resistance (TO-3)
Static Drain-to-Source ➃
On-State Resistance (TO-254)
Diode Forward Voltage ➃
Test Conditions
30
2.0
—
—
—
—
—
4.0
100
-100
10
0.004
30
1.5
—
—
—
—
—
4.0
100
-100
25
0.005
nA
—
0.0095
—
0.01
Ω
VGS = 12V, ID =35A
—
1.2
—
1.2
V
VGS = 0V, IS = 35A
V
µA
Ω
VGS = 0V, ID = 1.0mA
VGS = VDS, ID = 1.0mA
VGS = 20V
VGS = -20 V
VDS= 24V, VGS =0V
VGS = 12V, ID =35A
1. Part numbers IRHM57Z60, IRHM53Z60 and IRHM54Z60
2. Part number IRHM58Z60
International Rectifier radiation hardened MOSFETs have been characterized in heavy ion environment for
Single Event Effects (SEE). Single Event Effects characterization is illustrated in Fig. a and Table 2.
Table 2. Single Event Effect Safe Operating Area
Ion
Br
I
Au
LET
MeV/(mg/cm2))
37.9
59.4
80.3
Energy
(MeV)
255
290
313
VDS (V)
Range
(µm) @VGS=0V @VGS=-5V @VGS=-10V @VGS=-15V @VGS=-20V
33.4
30
30
30
25
20
28.8
25
25
20
15
10
26.5
22.5
22.5
15
10
—
35
30
VDS
25
Br
I
AU
20
15
10
5
0
0
-5
-10
-15
-20
VGS
Fig a. Single Event Effect, Safe Operating Area
For footnotes refer to the last page
www.irf.com
3
IRHM57Z60
1000
Pre-Irradiation
1000
VGS
15V
12V
10V
9.0V
8.0V
7.0V
6.0V
BOTTOM 5.0V
100
100
5.0V
10
20µs PULSE WIDTH
T = 25 C
1
5.0V
10
10
100
2.0
100
TJ = 25 ° C
15
V DS = 15V
20µs PULSE WIDTH
8
9
10
11
VGS , Gate-to-Source Voltage (V)
Fig 3. Typical Transfer Characteristics
4
R DS(on) , Drain-to-Source On Resistance
(Normalized)
I D , Drain-to-Source Current (A)
TJ = 150 ° C
7
10
100
Fig 2. Typical Output Characteristics
1000
6
1
VDS , Drain-to-Source Voltage (V)
Fig 1. Typical Output Characteristics
5
°
J
1
0.1
VDS , Drain-to-Source Voltage (V)
10
20µs PULSE WIDTH
T = 150 C
°
J
1
0.1
VGS
15V
12V
10V
9.0V
8.0V
7.0V
6.0V
BOTTOM 5.0V
TOP
I D , Drain-to-Source Current (A)
I D , Drain-to-Source Current (A)
TOP
ID = 35A
1.5
1.0
0.5
0.0
-60 -40 -20
VGS = 12V
0
20
40
60
80 100 120 140 160
TJ , Junction Temperature( °C)
Fig 4. Normalized On-Resistance
Vs. Temperature
www.irf.com
Pre-Irradiation
VGS =
Ciss =
Crss =
Coss =
12000
0V,
f = 1MHz
Cgs + Cgd , Cds SHORTED
Cgd
Cds + Cgd
Ciss
9000
C
oss
6000
3000
20
VGS , Gate-to-Source Voltage (V)
15000
C, Capacitance (pF)
IRHM57Z60
1
VDS = 24V
VDS = 15V
12
8
4
FOR TEST CIRCUIT
SEE FIGURE 13
0
10
0
100
50
VDS , Drain-to-Source Voltage (V)
100
150
200
250
QG , Total Gate Charge (nC)
Fig 6. Typical Gate Charge Vs.
Gate-to-Source Voltage
Fig 5. Typical Capacitance Vs.
Drain-to-Source Voltage
1000
1000
ISD , Reverse Drain Current (A)
16
C
rss
0
ID = 35A
OPERATION IN THIS AREA LIMITED
BY R
DS(on)
I D , Drain Current (A)
100
TJ = 150 ° C
100
10
TJ = 25 ° C
1
V GS = 0 V
0.1
0.0
0.5
1.0
1.5
VSD ,Source-to-Drain Voltage (V)
Fig 7. Typical Source-Drain Diode
Forward Voltage
www.irf.com
2.0
1ms
10
10ms
TC = 25 ° C
TJ = 150 ° C
Single Pulse
1
10
100
VDS , Drain-to-Source Voltage (V)
Fig 8. Maximum Safe Operating Area
5
IRHM57Z60
Pre-Irradiation
RD
VDS
140
LIMITED BY PACKAGE
VGS
120
D.U.T.
I D , Drain Current (A)
RG
+
-VDD
100
VGS
80
Pulse Width ≤ 1 µs
Duty Factor ≤ 0.1 %
60
Fig 10a. Switching Time Test Circuit
40
VDS
20
90%
0
25
50
75
100
125
150
TC , Case Temperature ( °C)
10%
VGS
Fig 9. Maximum Drain Current Vs.
Case Temperature
td(on)
tr
t d(off)
tf
Fig 10b. Switching Time Waveforms
Thermal Response (Z thJC )
1
D = 0.50
0.1
0.20
0.10
0.05
0.02
0.01
0.01
PDM
SINGLE PULSE
(THERMAL RESPONSE)
t1
t2
0.001
0.00001
Notes:
1. Duty factor D = t 1 / t 2
2. Peak TJ = P DM x Z thJC + TC
0.0001
0.001
0.01
0.1
1
t1 , Rectangular Pulse Duration (sec)
Fig 11. Maximum Effective Transient Thermal Impedance, Junction-to-Case
6
www.irf.com
Pre-Irradiation
IRHM57Z60
1 5V
EAS , Single Pulse Avalanche Energy (mJ)
2000
TOP
BOTTOM
1500
L
VD S
D .U .T.
RG
IA S
VGS
20V
D R IV E R
1000
+
- VD D
0 .0 1 Ω
tp
ID
16A
22A
35A
Fig 12a. Unclamped Inductive Test Circuit
A
500
0
25
V (B R )D S S
50
75
100
125
150
Starting TJ , Junction Temperature( ° C)
tp
Fig 12c. Maximum Avalanche Energy
Vs. Drain Current
IAS
Current Regulator
Same Type as D.U.T.
Fig 12b. Unclamped Inductive Waveforms
50KΩ
QG
12V
.2µF
.3µF
12 V
QGS
QGD
+
V
- DS
VGS
VG
3mA
Charge
Fig 13a. Basic Gate Charge Waveform
www.irf.com
D.U.T.
IG
ID
Current Sampling Resistors
Fig 13b. Gate Charge Test Circuit
7
IRHM57Z60
Pre-Irradiation
Footnotes:
➃ Pulse width ≤ 300 µs; Duty Cycle ≤ 2%
➄ Total Dose Irradiation with VGS Bias.
➀ Repetitive Rating; Pulse width limited by
maximum junction temperature.
➁ VDD = 25V, starting TJ = 25°C, L= 0.8 mH
Peak IL = 35A, VGS = 12V
➂ ISD ≤ 35A, di/dt ≤ 132A/µs,
VDD ≤ 30V, TJ ≤ 150°C
12 volt VGS applied and VDS = 0 during
irradiation per MIL-STD-750, method 1019, condition A.
➅ Total Dose Irradiation with VDS Bias.
24 volt VDS applied and VGS = 0 during
irradiation per MlL-STD-750, method 1019, condition A.
Case Outline and Dimensions — TO-254AA
0.12 [.005]
6.60 [.260]
6.32 [.249]
13.84 [.545]
13.59 [.535]
3.78 [.149]
3.53 [.139]
A
20.32 [.800]
20.07 [.790]
17.40 [.685]
16.89 [.665]
13.84 [.545]
13.59 [.535]
1.27 [.050]
1.02 [.040]
B
0.12 [.005]
C
2
22.73 [.895]
21.21 [.835]
20.32 [.800]
20.07 [.790]
17.40 [.685]
16.89 [.665]
2
17.40 [.685]
16.89 [.665]
0.84 [.033]
MAX.
1.14 [.045]
0.89 [.035]
0.36 [.014]
3.81 [.150]
4.82 [.190]
3.81 [.150]
4.06 [.160]
3.56 [.140]
1.14 [.045]
0.89 [.035]
3X
2X
0.36 [.014]
B
A
PIN AS S IGNMENT S
B A
NOT ES :
1.
2.
3.
4.
B
R 1.52 [.060]
3.81 [.150]
2X
13.84 [.545]
13.59 [.535]
3
3
3X
3.81 [.150]
1.27 [.050]
1.02 [.040]
A
1
1
6.60 [.260]
6.32 [.249]
13.84 [.545]
13.59 [.535]
3.78 [.149]
3.53 [.139]
PIN AS S IGNMENTS
DIMENS IONING & T OLERANCING PER AS ME Y14.5M-1994.
ALL DIMENS IONS ARE S HOWN IN MILLIMETERS [INCHES ].
CONT ROLLING DIMENS ION: INCH.
CONF ORMS T O JEDEC OUTLINE T O-254AA.
1 = DRAIN
2 = S OURCE
3 = GAT E
CAUTION
BERYLLIA WARNING PER MIL-PRF-19500
Packages containing beryllia shall not be ground, sandblasted, machined, or have other operations performed on them
which will will produce beryllia or beryllium dust. Furthermore, beryllium oxide packages shall not be placed in acids
that will produce fumes containing beryllium.
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105
TAC Fax: (310) 252-7903
Visit us at www.irf.com for sales contact information.
Data and specifications subject to change without notice. 08/02
8
www.irf.com