AZ23C5V6P SURFACE MOUNT ZENER DIODES FEATURES • Planar die construction • 200mW Power dissipation • Ideally suited for automated assembly processes • In compliance with EU RoHS 2002/95/EC directives MECHANICALDATA • Case: SOT-23, Molded Plastic • Terminals: Solderable per MIL-STD-750, Method 2026 • Polarity: See circuit schematic below • Approx. Weight: 0.008gram • Mounting Position: Any COMMON ANODE • Marking : ID MAXIMUM RATINGS Parameter Symbol Value Units Maximum Power Dissipation at 25oC PD 200 mW Junction Temperature TJ 150 o C TSTG -55 to +150 o C Storage Temperature Range ELECTRICALCHARACTERISTICS Parameter Symbol Condition Value Unit Min. Max. V 5.31 5.92 V Zener Voltage VZ I Z=5mA Maximum DC Reverse Current TA=25oC IR VR=2.5V 1.0 µA Dynamic Impedance ZZ I Z=5mA 60 Ω Rising Operation Resistance ZZK I Z=0.5mA 200 Ω Capacitance Between Terminals CT f=1MHZ VR=5V TYP. 12 pF Note : Valid provided that leads ara distance of 8mm from case are keptatam bienttem perature REV.0.0-JAN.9.2009 PAGE . 1 AZ23C5V6P REV.0.0-JAN.9.2009 PAGE . 2 AZ23C5V6P MOUNTING PAD LAYOUT ORDER INFORMATION • Packing information T/R - 12K per 13" plastic Reel T/R - 3K per 7” plastic Reel LEGAL STATEMENT Copyright PanJit International, Inc 2009 The information presented in this document is believed to be accurate and reliable. The specifications and information herein are subject to change without notice. Pan Jit makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose. Pan Jit products are not authorized for use in life support devices or systems. Pan Jit does not convey any license under its patent rights or rights of others. REV.0.0-JAN.9.2009 PAGE . 3