SPECIFICATION CONTROL DRAWING Product Name B-044-20-N B-044-22-N L max 28.0 (1.100) B-044-24-N 29.0 (1.142) B-044-26-N Component Dimensions øA øB øC min min min 3.40 (0.135) 2.30 (0.090) “GA” Wire Gauge (AWG) 20 22 0.8 (0.030) 28.0 (1.100) 24 26 øD øE 1.70 (0.065) to 3.40 (0.135) 1.30 (0.050) To 2.30 (0.090) Cable Dimensions øF G±0.5 min (G±0.02) M±0.5 (M±0.02) 16.0 (0.630) 0.30 (0.012) 6.0 (0.235) MATERIALS 1. & 5. INSULATION SLEEVE: Heat-shrinkable, radiation cross-linked modified polyvinylidene fluoride. Transparent blue. 2. & 4. SOLDER PREFORMS WITH FLUX: SOLDER: TYPE Sn63 per ANSI J-STD-006. FLUX: TYPE ROL1 per ANSI J-STD-004. 3. & 6. MELTABLE RINGS: Thermally stabilized thermoplastic. 7. CONDUCTOR LEAD: MIL-W-22759/32-GA-9, AWG “GA” (see table). ETFE insulated, stranded tin plated copper. Color: white. 8. GROUND LEAD: MIL-W-22759/32-GA-6, AWG “GA” (see table). ETFE insulated, stranded tin plated copper. Color: blue. APPLICATION 1. The parts covered by this SCD are for use in terminating the primary conductor and the braided shield of a coaxial cable having tin or silver plated conductor and shield, rated for at least 125° C and meeting the dimensional requirements listed. 2. Parts will meet the requirements of Raychem Specification RT-1404 when installed per Raychem RPIP-500-03. 3. Temperature range: -55°C to +150°C. For best results, prepare the cable as shown: TE Connectivity 300 Constitution Dr Menlo Park, CA 94025, U.S.A. Unless otherwise specified dimensions are in millimeters. [Inches dimensions are shown in brackets] TOLERANCES: 0.00 N/A 0.0 N/A 0 N/A DRAWN BY: ANGLES: N/A ROUGHNESS IN MICRON CAGE CODE: Raychem TE Connectivity reserves the right to amend this drawing at any time. Users should evaluate the suitability of the product for their application. REPLACES: ECO NUMBER: D001334 ECO-11-005139 TITLE: COAXIAL SOLDERSLEEVE DEVICE WITH PRE-INSTALLED STRANDED WIRE DOCUMENT NO.: B-044-GA-N REV: DATE: E1 SCALE: 15-Apr-11 SIZE: P.TALLY 06090 NTS A © 2007,2011 Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All Rights Reserved. If this document is printed it becomes uncontrolled. Check for the latest revision. SHEET: 1 of 1