STC403L NPN Silicon Transistor Applications PIN Connection • Power amplifier application • High current switching application. Features • Power Transistor General Purpose application • Low saturation voltage : VCE(SAT)=0.4V Typ. • High Voltage : VCEO=60V Min. TO -92L 1: Emitter Ordering Information 2 :Collector 3: Base Type NO. Marking Package Code STC403L STC403 TO-92L Absolute maximum ratings Characteristic Symbol Rating Unit Collector-base voltage VCBO 80 V Collector-emitter voltage VCEO 60 V Emitter-base voltage VEBO 5 V IC 3 A(DC) *ICP 6 A(Pulse) Collector power dissipation PC 1 W Junction temperature Tj 150 °C Storage temperature Tstg -55~150 °C Collector current * : Single pulse, tp= 300 ㎲ Characteristic Thermal resistance Symbol Typ. Max Unit Rth(J-a) - 125.0 ℃/W KSD-T0D004-003 1 STC403L Electrical Characteristics Characteristic Symbol Collector-Emitter breakdown voltage BVCEO IC=50mA, IB=0 60 - - V Collector cut-off current ICBO VCB=60V, IE=0 - - 50 μA Emitter cut-off current IEBO VEB=5V, IC=0 - - 50 μA DC current gain hFE * VCE=5V, IC=0.5A 200 - 400 - Base-Emitter on voltage VBE(ON) VCE=5V, IC=0.5A - 0.7 1 V Collector-Emitter saturation voltage VCE(sat) IC=2A, IB=0.2A - 0.4 1 V fT VCB=5V, IC=0.5A - 30 - MHz VCB=10V, IE=0, f=1MHz - 35 - pF Transition frequency Collector output capacitance Switching Time Cob Test Condition Min. Typ. Max. Turn-on Time ton - 0.65 - Storage Time tstg - 1.3 - tf - 0.65 - Fall Time Unit ㎲ * hFE rank : 200~400 Only KSD-T0D004-003 2 STC403L Electrical Characteristic Curves Fig. 1 PC - Ta Fig. 2 VCE - IC Fig. 3 hFE-IC Fig. 4 hFE-IC Fig. 6 IC - VCE Fig. 5 IC - VCE ㎂ ㎂ ㎂ ㎂ ㎂ KSD-T0D004-003 3 STC403L Electrical Characteristic Curves Fig. 7 Safe operating Area * * * * ) KSD-T0D004-003 4 STC403L Outline Dimension KSD-T0D004-003 5 STC403L The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. KSD-T0D004-003 6