MA4SW101-287T Surface Mount Monolithic PIN Diode Switches 50 MHz - 4 GHz Features • • • • • Rev. V3 Product Image Low Cost/High Volume Broadband Performance 50 MHz - 4 GHz Low Insertion Loss/ High Isolation Low Distortion Available in Tape & Reel Description Using M/A-COM's HMIC monolithic technology, M/ACOM has developed a family of broadband PIN diode MMIC switches packaged in popular, industry standard surface mount packages. The MA4SW101287T is an SPST SOT–23 packaged switch utilizing two PIN diodes in a series shunt configuration. Schematic and Bias Connections These switches offer broadband (50 MHz-4 GHz) performance, fast switching speed and low distortion. The switches have been designed for low cost, high volume applications. These switches are available for tape and reel insertion. Ordering Information Part Number Package MA4SW101-287T Plastic SOT-23 Truth Table Typical Performance: Z0 = 50Ω, I bias= +/- 20mA Control Level (DC Current) Condition of Switch J2 RF in to RF out - 20 mA Loss State +20 mA Isolation Typical Parameter Units Frequency MHz 2000 Insertion Loss dB 0.30 Isolation dB 36 Return Loss dB 21 25ºC TOP View Absolute Maximum Ratings Parameter Absolute Maximum Operating Temperature -65ºC to +85ºC Storage Temperature -65ºC to +125ºC Applied DC Voltage 50V Power Dissipation @+25ºC 50 mW max Incident Power @+25ºC 100 mW max 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MA4SW101-287T Surface Mount Monolithic PIN Diode Switches 50 MHz - 4 GHz Rev. V3 Electrical Specifications at +25°C Parameter1 Frequency Units Min. Typ. Max Insertion Loss 50 MHz 1 GHz 2 GHz 3 GHz 4 GHz dB dB dB dB dB — — — — — 0.3 0.3 0.3 0.4 0.5 0.4 0.5 0.5 — — Isolation 50 MHz 1 GHz 2 GHz 3 GHz 4 GHz dB dB dB dB dB 60 40 30 — — 70 46 36 30 26 — — — — — Input Return Loss 50 MHz 1 GHz 2 GHz 3 GHz 4 GHz dB dB dB dB dB 25 20 17 — — 28 23 21 18 15 — — — — — Voltage Rating2 — Volts 50 — — Second Harmonic Distortion @ 0dBm 1 GHz dBc — 75 — Third Harmonic Distortion @ 0dBm 1 GHz dBc — 90 — nsec — 50 — dB — 0.1 — Switching Speed Signal Compression @ 100mW 1 GHz 1. Parameters (except for voltage rating) are specified with +/-20mA at all output ports in 50 Ω microstrip test fixture. 2. Reverse current will not exceed 10 μA at the rated voltage. 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MA4SW101-287T Surface Mount Monolithic PIN Diode Switches 50 MHz - 4 GHz Rev. V3 Typical Performance Curves at +25°C Case Styles SOT-23 (Case Style 287) SOT-23 (Case Style 287) F N A D B M G K L H E J C DIM. INCHES MIN. MAX. MILLIMETERS MIN. MAX. A B C D E F G H J K L 0.048 ⎯ 0.008 ⎯ 0.040 ⎯ 0.013 0.020 0.003 0.006 0.110 0.119 0.047 0.056 0.037 typical 0.075 typical 0.103 ⎯ 0.024 ⎯ 1.22 ⎯ 0.20 ⎯ 1.00 ⎯ 0.35 0.50 0.08 0.15 2.80 3.00 1.20 1.40 0.95 typical 1.90 typical 2.60 ⎯ 0.60 ⎯ DIM. GRADIENT M N 10° max. 3 2° . . .30° 3. Applicable on all sides 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MA4SW101-287T Surface Mount Monolithic PIN Diode Switches 50 MHz - 4 GHz Mounting Information The illustration indicates the recommended mounting pad configuration for the SOT-23, package. Solder paste containing flux should be screened onto the pads to a thickness of 0.0050.007 inches. The plastic package is placed in position, firmly adhering to the solder paste. Permanent attachment is performed by a reflow soldering procedure during which the tab temperature does not exceed +275 °C and the body temperature does not exceed +250 °C. Please refer to Application Note M538 for surface mounting instructions. Rev. V3 SOT-23 .030 min. 0.80 .090 2.2 .035 min. 0.90 .037 0.95 0.75 1.9 Dimenstions: inches mm 4 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.