VISHAY BY500-200

BY500-100 thru BY500-800
Vishay General Semiconductor
Soft Recovery Fast Switching Plastic Rectifier
FEATURES
• Fast switching for high efficiency
• Low forward voltage drop
• Low leakage current
• High forward surge capability
• Solder dip 275 °C max. 10 s, per JESD 22-B106
• Compliant to RoHS directive 2002/95/EC and in
accordance to WEEE 2002/96/EC
DO-201AD
TYPICAL APPLICATIONS
For use in medium frequency rectification of switching mode
power supplies, inverters, converters, TV sanning,
Ultrasonic-system, speed controlled DC motors, low RF
interference and freewheeling diode circuit.
PRIMARY CHARACTERISTICS
IF(AV)
5.0 A
VRRM
100 V to 800 V
IFSM
200 A
MECHANICAL DATA
trr
200 ns
IR
10 μA
VF
1.35 V
Case: DO-201AD, molded epoxy body
Molding compound meets UL 94 V-0 flammability rating
Base P/N-E3 - RoHS compliant, commercial grade
TJ max.
125 °C
Note
• These devices are not AEC-Q101 qualified.
Terminals: Matte tin plated leads, solderable
J-STD-002 and JESD 22-B102
E3 suffix meets JESD 201 class 1A whisker test
per
Polarity: Color band denotes cathode end
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL BY500-100 BY500-200 BY500-400 BY500-600 BY500-800
Maximum repetitive peak reverse voltage
VRRM
UNIT
100
200
400
600
800
V
Maximum RMS voltage
VRMS
70
140
280
420
560
V
Maximum DC blocking voltage
VDC
100
200
400
600
800
V
Maximum average forward rectified current
0.375" (9.5 mm) lead length at TL = 45 °C
IF(AV)
5.0
A
Peak forward surge current 10 ms single half
sine-wave superimposed on rated load at TA = 25 °C
IFSM
200
A
Maximum repetitive peak forward surge
IFRM
10
A
TJ
- 50 to + 125
°C
TSTG
- 50 to + 150
°C
Operating junction temperature range
Storage temperature range
Document Number: 88544
Revision: 26-Oct-09
For technical questions within your region, please contact one of the following:
[email protected], [email protected], [email protected]
www.vishay.com
1
BY500-100 thru BY500-800
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
TEST CONDITIONS
Maximum
instantaneous forward
voltage
5.0 A
Maximum DC reverse
current at rated DC
blocking voltage
SYMBOL
BY500-100 BY500-200 BY500-400 BY500-600 BY500-800
UNIT
VF
1.35
V
10
μA
1.0
mA
trr
200
ns
IRM(REC)
2.0
A
CJ
28
pF
SYMBOL
BY500-100 BY500-200 BY500-400 BY500-600 BY500-800
UNIT
RθJA (1)
22
°C/W
TA = 25 °C
IR
TA = 100 °C
Maximum reverse
recovery time
Maximum reverse
recovery current
IF = 1.0 A, VR = 30 V,
dI/dt = 50 A/μs,
Irr = 10 % IRM
Typical junction
capacitance
4.0 V, 1 MHz
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
Typical thermal resistance
Note
(1) Thermal resistance from junction to ambient at 0.375" (9.5 mm) lead length with both leads to heat sink
ORDERING INFORMATION (Example)
PREFERRED P/N
UNIT WEIGHT (g)
PREFERRED PACKAGE CODE
BASE QUANTITY
DELIVERY MODE
BY500-400-E3/54
1.1
54
1400
13" diameter paper tape and reel
BY500-400-E3/73
1.1
73
1000
Ammo pack packaging
RATINGS AND CHARACTERISTICS CURVES
(TA = 25 °C unless otherwise noted)
0.375" (9.5 mm)
Lead Length
TL = Lead Temperature
5.0
Resistive or
Inductive Load
4.0
0.8" x 0.8" x 0.04"
(20 mm x 20 mm
x 1 mm)
Copper Heatsinks
TA = Ambient Temperature
3.0
P.C.B. Mounted
on 0.2" x 0.2"
(5.0 mm x 5.0 mm)
Copper Pad Areas
0.375" (9.5 mm)
Lead Length
2.0
1.0
0
1000
Peak Forward Surge Current (A)
Average Forward Rectified Current (A)
6.0
Non-Repetitive
100
Repetitive
TA = 25 °C
10 ms Single Half Sine-Wave
at Rated Load
10
0
20
40
60
80
100
120
140
1
100
10
Temperature (°C)
Number of Cycles at 50 Hz
Fig. 1 - Forward Current Derating Curves
Fig. 2 - Maximum Peak Forward Surge Current
www.vishay.com
2
For technical questions within your region, please contact one of the following:
[email protected], [email protected], [email protected]
Document Number: 88544
Revision: 26-Oct-09
BY500-100 thru BY500-800
Vishay General Semiconductor
100
Junction Capacitance (pF)
Instantaneous Forward Current (A)
100
10
TJ = 25 °C
Pulse Width = 300 μs
1 % Duty Cycle
1
0.1
0.01
0.4
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
10
5
0.6
0.8
1.0
1.2
1.4
1.6
1.8
1
2.0
100
10
Instantaneous Forward Voltage (V)
Reverse Voltage (V)
Fig. 3 - Typical Instantaneous Forward Characteristics
Fig. 5 - Typical Junction Capacitance
Instantaneous Reverse Current (μA)
10
TJ = 100 °C
1
TJ = 50 °C
0.1
TJ = 25 °C
0.01
0
20
40
60
80
100
Percent of Rated Peak Reverse Voltage (%)
Fig. 4 - Typical Reverse Characteristics
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
DO-201AD
1.0 (25.4)
MIN.
0.210 (5.3)
0.190 (4.8)
DIA.
0.375 (9.5)
0.285 (7.2)
1.0 (25.4)
MIN.
0.052 (1.32)
0.048 (1.22)
DIA.
Document Number: 88544
Revision: 26-Oct-09
For technical questions within your region, please contact one of the following:
[email protected], [email protected], [email protected]
www.vishay.com
3
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 11-Mar-11
www.vishay.com
1