SRP600A thru SRP600K Vishay General Semiconductor Fast Switching Plastic Rectifier FEATURES • Fast switching for high efficiency • Low forward voltage drop • Low leakage current • High forward current operation • High forward surge capability • Solder dip 275 °C max. 10 s, per JESD 22-B106 P600 • Compliant to RoHS directive 2002/95/EC and in accordance to WEEE 2002/96/EC TYPICAL APPLICATIONS For use in fast switching rectification of power supply, inverters, converters and freewheeling diodes for consumer and telecommunication. PRIMARY CHARACTERISTICS IF(AV) 6.0 A VRRM 50 V to 800 V IFSM 300 A Note • These devices are not AEC-Q101 qualified. trr 100 ns, 150 ns, 200 ns VF 1.3 V IR 10 μA TJ max. 125 °C MECHANICAL DATA Case: P600, void-free molded epoxy body Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS compliant, commercial grade Terminals: Matte tin plated leads, solderable J-STD-002 and JESD 22-B102 E3 suffix meets JESD 201 class 1A whisker test per Polarity: Color band denotes cathode end MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL SRP600A SRP600B SRP600D SRP600G SRP600J SRP600K UNIT Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 V Maximum RMS voltage VRMS 35 70 140 280 420 560 V Maximum DC blocking voltage VDC 50 100 200 400 600 800 V Maximum average forward rectified current 0.375" (9.5 mm) lead length at TA = 55 °C IF(AV) 6.0 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 300 A TJ - 50 to + 125 °C TSTG - 50 to + 150 °C Operating junction temperature range Storage temperature range Document Number: 88745 Revision: 27-Oct-09 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 1 SRP600A thru SRP600K Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS Maximum instantaneous forward voltage 6.0 A SYMBOL VF Maximum DC reverse current at rated DC blocking voltage SRP600J SRP600K UNIT 1.3 V 10 μA 1.0 mA TA = 25 °C IR TA = 100 °C IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A Maximum reverse recovery time SRP600A SRP600B SRP600D SRP600G 100 trr 150 200 ns THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL Typical thermal resistance RθJA SRP600A SRP600B SRP600D SRP600G (1) SRP600J SRP600K UNIT 10 °C/W Note (1) Thermal resistance from junction to ambient at 0.375" (9.5 mm) lead length with both leads equally heat sink ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE SRP600J-E3/54 2.1 54 800 13" diameter paper tape and reel SRP600J-E3/73 2.1 73 300 Ammo pack packaging RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 7.0 20 Resistive or Inductive Load 6.0 5.0 1.1" x 1.1" (30 mm x 30 mm) Copper Pads 4.0 Ipk =π IAV 3.0 Capacitive Loads 5.0 Ipk = 10 IAV 20 2.0 1.0 0 Average Forward Current (A) Average Forward Current (A) Resistive or Inductive Load L= 16 0.1 2" L= 12 (3.2 mm ) 0.25 " (6 L=0 8 1.6" x 1.6" x 0.04" (40 mm x 40 mm x 1 mm) Copper Heatsinks .3 m m) .375 " (9. L = Lead Length 5 mm L = 0.6 2" (15 .9 ) mm) 4 0 20 40 60 80 100 120 140 160 180 75 80 85 90 95 100 105 110 115 120 125 Ambient Temperature (°C) Lead Temperature (°C) Fig. 1 - Forward Current Derating Curves Fig. 2 - Forward Current Derating Curve www.vishay.com 2 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] Document Number: 88745 Revision: 27-Oct-09 SRP600A thru SRP600K Vishay General Semiconductor 10 8.3 ms Single Half Sine-Wave Instantaneous Reverse Current (μA) Peak Forward Surge Current (A) 400 350 300 TJ = 25 °C 250 200 TJ = 125 °C 150 TJ = 100 °C 1 TJ = 50 °C 0.1 TJ = 25 °C 0.01 100 100 10 1 0 20 40 60 80 100 Number of Cycles at 60 Hz Percent of Rated Peak Reverse Voltage (%) Fig. 3 - Maximum Non-Repetitive Peak Forward Surge Current Fig. 5 - Typical Reverse Characteristics 25 L = Lead Lengths RθJL Thermal Resistance from Junction to Lead (°C/W) Instantaneous Forward Current (A) 100 TJ = 25 °C Pulse Width = 300 μs 1 % Duty Cycle 10 1 0.1 0.6 20 Copper Heatsinks 15 10 5 0 0.8 1.0 1.2 1.4 1.6 1.8 2.0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 Instantaneous Forward Voltage (V) Equal Lead Lengths to Heatsink (inches) Fig. 4 - Typical Instantaneous Forward Characteristics Fig. 6 - Typical Thermal Resistance 1.0 PACKAGE OUTLINE DIMENSIONS in inches (millimeters) P600 1.0 (25.4) MIN. 0.360 (9.1) 0.340 (8.6) 0.360 (9.1) 0.340 (8.6) 0.052 (1.32) 0.048 (1.22) DIA. Document Number: 88745 Revision: 27-Oct-09 1.0 (25.4) MIN. For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 3 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1