1-Channel ESD Protection Device in 0201 CSP CM1242-07CP Functional Description The CM1242-07CP is a 2-bump ESD protection device in 0201 CSP form factor. It is fully compliant with IEC 61000-4-2. The CM1242-07CP is also RoHS II compliant and has a pure tin finish. Electrical Schematic A B Pin Configurations ©2010 SCILLC. All rights reserved. April 2010 – Rev. 1 Publication Order Number: CM1242-07CP/D CM1242-07CP Pin Descriptions PIN DESCRIPTION A ESD Channel Pin 1 B ESD Channel Pin 2 Ordering Information Bumps Package 2 CSP 1 Ordering Part Number CM1242-07CP Part Marking A Note 1: Parts are shipped in Tape and Reel form. Operating Conditions PARAMETER RATING UNITS Storage Temperature Range -55 to +150 °C Operating Temperature Range -40 to +85 °C ±5.5 V Maximum Input Voltage Rev. 1 | Page 2 of 5 | www.onsemi.com CM1242-07CP Electrical Operating Characteristics (see Note 1) SYMBOL PARAMETER CONDITIONS MIN TYP MAX UNITS Breakdown Voltage IF = +10mA IF = -10mA 6.0 -9.0 7.6 -7.6 9.0 -6.0 V V ILEAK Channel Leakage Current VIN = ±3V ±0.1 ±0.50 µA CIN Channel Input Capacitance At 1 MHz, VIN=0V 5.8 7.0 pF ESD Protection Peak Discharge Voltage at any channel input a) Contact discharge per IEC 61000-4-2 standard b) Air discharge per IEC 61000-4-2 standard Note 2 Channel Clamp Voltage Positive Transients Negative Transients IPP = 1A, tP = 8/20µs; Dynamic Resistance Positive Transients Negative Transients IPP = 1A, tP = 8/20µs; VB VESD VCL RDYN Note 1: TA=25°C unless otherwise specified. Note 2: Standard IEC 61000-4-2 with CDischarge = 150pF, RDischarge = 330Ω. Rev. 1 | Page 3 of 5 | www.onsemi.com 4.6 ±17 kV ±17 kV +9.8 -9.8 V V 1.5 1.5 Ω Ω CM1242-07CP CM1242-07CP Mechanical Specifications The CM1242-07CP is supplied in a 2-bump Chip Scale Package (CSP). Package Specifications Package Custom CSP Bumps 2 Dim Millimeters Inches Min Nom Max Min Nom Max A 0.195 0.215 0.235 0.00768 0.00846 0.00925 B 0.140 0.155 0.170 0.0055 0.0061 0.0067 0.360 REF C 0.01417 REF C1 0.190 0.205 0.220 0.00748 0.00807 0.00866 D 0.570 0.600 0.630 0.02244 0.02362 0.02480 E 0.270 0.300 0.330 0.01063 0.01181 0.01299 F 0.250 0.275 0.300 0.00984 0.01083 0.01181 G 0.240 0.265 0.290 0.00945 0.01043 0.01142 Controlling dimension: millimeters CM1242-07CP Chip Scale Package CSP Tape and Reel Specifications PART NUMBER CHIP SIZE (mm) POCKET SIZE (mm) B0 X A0 X K0 TAPE WIDTH W REEL DIAMETER QTY PER REEL P0 P1 CM1242-07CP 0.600 X 0.300 X 0.275 0.67 x 0.37 x 0.35 8mm 178mm (7") 15,000 4mm 2mm Tape and Reel Mechanical Data Rev. 1 | Page 4 of 5 | www.onsemi.com CM1242-07CP ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING ORDERING INFORMATION LITERATURE FULFILLMENT: FULFILLMENT Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: Phone 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: Fax 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: Email [email protected] N. American Technical Support: Support 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5773-3850 Rev. 1 | Page 5 of 5 | www.onsemi.com ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative