SDS Series Side Actuated Detect Switches Features/Benefits • Low profile package sits just 2mm off PCB • 2mm overtravel ideal for detector applications • Low actuation force (75 grams max.) • Pick & place compatible, available in tape & reel packaging • RoHS compliant and compatible Typical Applications • Medical devices • Consumer electronic devices • PCB lock cam detect • Smart card detect • ATCA and MicroTCA AdvancedTCA R Specifications Materials CONTACT RATING: 100 mA @ 12 VDC. BASE: Glass filled LCP (UL 94V-0). MECHANICAL & ELECTRICAL LIFE: 50,000 cycles. ACTUATOR: Glass Filled Polyamide (UL94V-0). CONTACT RESISTANCE: 100 m Ω max. initial. SURFACE PLATE: Nickel silver w/silver plate. INSULATION RESISTANCE: 100 M Ω min. @ 100 VDC. MOVABLE CONTACT: Phosphor bronze, see table for plating. OPERATING TEMPERATURE: –40ºC to +85ºC. TERMINALS: Phosphor bronze, see table for plating. SOLDERABILITY: IR compatible, no wash. 260ºC max. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. PACKAGING: Bulk or tape & reel (3000 per reel). How to Order Complete part numbers for SDS Series Switches are shown below. PART NUMBER Terminal 1 HOUSING COLOR PACKAGING Black SDS002 SDS002R SDS004 R SDS005R Tape & Reel N.O. Bulk White Terminal Plating Silver Silver Clad Plate Tape & Reel N.C. Bulk Black SDS004R SDS005 Contact Plating Bulk SDS001 SDS001R SCHEMATIC Tape & Reel N.O. Bulk Gold Gold Flash Flash White Tape & Reel N.C. `ON' POSITION (N.O. Options) 1,75 SDS001 SPST Detect E TAPE & REEL Third Angle Projection Dimensions are shown: mm Specifications and dimensions subject to change E–12 www.ck-components.com