SDB10200PH Schottky Barrier Rectifier HIGH VOLTAGE SCHOTTKY RECTIFIER Features Low forward voltage drop Low power loss and High efficiency Low leakage current High surge capability Pin Configuration Pin 1: Cathode Pin 2: Anode Full lead (Pb)-free and RoHS compliant device TO-220F-2L Applications High efficiency SMPS Product Characteristics Output rectification IF(AV) 10A VRRM 200V VFM at 125℃ 0.88V IFSM 180A High frequency switching Freewheeling DC-DC converter systems Description The SDB10200PH is ideally suited for a full wave output rectifier in low switching power supplies, inverters and as free wheeling diodes. Ordering Information Device Marking Code Package Packaging SDB10200PH SDB10200 TO-220F-2L Tube Marking Information AUK = Manufacture Logo ∆ = Control Code of Manufacture YMDD = Date Code Marking -. Y = Year Code -. M = Monthly Code -. D = Daily Code SDB10200 = Specific Device Code KSD-D0Q013-003 1 SDB10200PH Absolute Maximum Ratings (Limiting Values) Characteristic Symbol Value Unit Maximum repetitive reverse voltage Maximum working peak reverse voltage Maximum DC blocking voltage VRRM VRWM VR 200 V Maximum average forward rectified current IF(AV) 10 A Peak forward surge current 8.3ms single half sine-wave superimposed on rated load per diode IFSM 180 A Storage temperature range Tstg -55℃ to +150℃ ℃ Maximum operating junction temperature TJ 150 ℃ Symbol Value Unit Rth(j-c) 4.0 ℃/W Thermal Characteristics Characteristic Maximum thermal resistance junction to case Electrical Characteristics Characteristic Symbol Test Condition Peak forward voltage drop VFM (1) IFM = 10A Reverse leakage current IRM (1) VR = VRRM Junction capacitance Cj Min. Typ. Max. Unit Tj=25℃ - - 0.95 V Tj=125℃ - - 0.88 V Tj=25℃ - - 20 uA Tj=125℃ - - 10 mA - - 120 pF VR = 10VDC, f=1MHz Note : (1) Pulse test : tP≤380 ㎲, Duty cycle≤2% KSD-D0Q013-003 2 SDB10200PH Rating and Characteristic Curves Fig. 2) Typical Reverse Characteristics ㎂ Fig. 1) Typical Forward Characteristics Fig. 3) Maximum Forward Derative Curve Fig. 4) Forward Power Dissipation Fig. 5) Maximum Non-Repetitive Peak Forward Surge Current Fig. 6) Typical Junction Capacitance KSD-D0Q013-003 3 SDB10200PH Package Outline Dimension KSD-D0Q013-003 4 SDB10200PH The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. KSD-D0Q013-003 5